Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

INSTALLATIONinfinitew DVX III
Digital Key Telephone System
F.Single Line Board (SL12)The Single Line Telephone board (SL12)
provides the interface for 12 2500-type sin-gle line telephones. This board can be
plugged into any designated station slot. It
is recommended that the Tri-Output PowerSupply be used with this card to provide
the 
9OV ac and -48V dc voltages.
Only one Ring Generator is required per
system. One Tri-Output Power Supply willaccommodate two SL12 boards. When an
SL12 board is installed,...

PAIR PIN COLOR
DESIG126WH/BLPort 001SLTTip
1BL/WH
SLT Ring
227WH/OR
2OR/WH
328WH/GNPort 002SLTTip
3GN/WH
SLT Ring
429WH/BN
4BN/WJbI
5
30WH/SLPort 003SLTTip
5
SL/wHSLT Ring
6
31RD/BL
6BL/RD
732RD/ORPort 004SLTTip
7OR/RDSLT Ring
833RD/GN
8GN/RD
934RD/BNPort 005SLTTip
9BN/RDSLT Ring
1035RD/SL
10SL/RD
1136BK/BLPort 006SLTTip
11BL/BKSLT Ring
1237BK/OR
12OR/BK
1338BK/GNPort 007SLTTip
13GN/BKSLT Ring
1439BK/BN
14BN/BK
1540BK/SLPort 008SLTTip
15SL/BK
SLT Ring
16-41YL/BL
16BL/YL
1742YL/ORPort 009SLTTip
17OR/YL...

INSTALLATIONinjinitem DVX In
Digital Key Telephone System
G.CO Loop Interface Board (C012)
This board interfaces 12 Loop start CO
lines to the system. This board can be
plugged into any designated trunk slot.
Refer to Figure 500-l 1 CO Line Board
(C012) for location of connectors.
LEDs h Indicators
The board contains two 
LEDs to indicate
the presence of -5V dc and 
+5V dc. In
addition, the board has 12 red 
LEDs to
provide the status of each CO line on the
board. The status shalI be lit is in use and...

+5v-5V
CO In Use
LED’s
I.
infznite” DVX I’Digital Key Telephone System
INSTALLATION
-,-Figure 500-l 1 CO Line Board (CO 12)
Issue 1, February 1994
500-17 

INSTALLATIONinfinitem DVX I’Digital Key Telephone System
500.4APPLICATION MODULES
A.
4-Circuit DTMF Receiver Module
(DTM4)This board provides four DTMF receivers
for SL12 boards. This board is connected
onto each SL12 board. Each SL12 board
may contain 1 DTM4 board. No more than3 SL12 boards with 
DTM4 Receiver Mod-
ules on them can be installed in the sys-
tem.
1Wiring 
/ PinoutsConnections
The board has a female molex connector ateach end that plugs onto metal pins lo-
cated on each SLT...

infznitem DVX I’Digital Key Telephone System
INSTALLATION
500.6Backplane I/O Expansion Module
Installation
The Backplane I/O Expansion Module is a wallmount unit with a 36-pin input connector and
four RS-232C output connectors.
The Backplane I/O Expansion kit consists of
one connecting cable, and the I/O Expansion
Module.1. Locate the Backplane I/O Expansion
Module in a location on the MDF back-
board convenient to the KSU.2. Locate the 
524 connector on the back-
plane of the KSU cabinet.3. Locate the...

infinite” DVX I’INSTALLATION
Digital Key Telephone System
500.7DIGITAL TERMINALS
A. Digital Terminal Installation:
The Digital 
Termina$s
are interfaced withthe infinite DVX
Key Station Board
(KT12) which has 12 circuits per board.
Each 12-circuit Key Station Board inter-
face is extended from the Basic KSU to theMDF through the front edge connector on
the key Station Board.
At the MDF are the terminated distributioncables that are run from each key tele-
phone location. Each Key Telephone re-
quires...

infhitem DV2C I’Digital Key Telephone SystemINSTALLATION
GREENGREEN
XMT TIPXMT TIP00
Key Telephone WiringDSS/DLS Console WiringRED
XMT RINGGREEN
TIPRED
RING
Single Line Telephone Wiring
Figure 500-13 Digital Terminal Modular Block WiringIssue 1, February 1994
500-2 1 

INSTALLATIONinfinite’l” DVX I’Digital Key Telephone System
HOOKS
L--
33-Button Wall Mount Bracket
\iHOOKS
/
lR
08-Button Wall Mount Bracket
Figure 500-14 Digital Terminal 
WaU Mounting
500-22Issue 1, February 1994 

infMtem DVX I’Digital Key Telephone System
INSTALLATION
D.
Wall Mounting the S-Button Digital
Terminal
To wall mount the in&tie Digital Terminal,it is necessary to use the &Button Wall
Mount bracket and one standard-type jackassembly designed for normal wall hang-
ing applications.1. Unplug the line cord from the phone. A
4-foot line cord is supplied with the wall
bracket.2. Line up the hooks at the bottom of the
bracket so that they engage with the slotscut in the bottom of the telephone base.
Tilt the...