Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

SLT FEATURE OPERATIONiqfinitem DVX I’Digital Key Telephone System
b. Dial 
[6901 on the dial pad.
c. Enter your name (up to 7 letters) using thepattern shown below.
A=21
B 
=22C 
=23D 
=31E 
=32F 
=33G 
=41H 
=42I 
=43J 
=51K 
=52L 
=53M 
=61N 
=620 
=63
P=71
Q =74R 
=72s 
=73
T=SlU 
=82V 
=83
w=91x 
=92Y 
=93
z =94
:
1 =l#2 
=2#3 
=3#4 
=4#5 
=5#6 
=6#7 
=7#8 
=8#9 
=9#0 
=O#
Space = 11: 
=12
-=13
’ =14
“ =(-)I, 
=02? 
=03
/ =04
! =*1$ 
=*2
& =*4* 
=*#
(=#l
) =#2+ 
=#3
= =#4
# =##
d. Press the...

infhitem DVK I’Digital Key Telephone System
ATTENDANT FEATURE OPERATION
SECTION 420ATTENDANT FEATURE OPERATION
420.1INTRODUCTION
The infinite Digital Key Telephone System has awide variety of features and flexible program-
ming, allowing each telephone user to program
his/her telephone to meet his/her own individ-
ual needs.
This section of the manual contains the operat-ing instructions for Attendant Key Telephone
user(s) and includes an illustration of the 
33-
button digital key telephone used in the...

ATTENDANT FEATURE OPERATIONinfinitem DVX I’Digital Key Telephone System
the speakerphone, or the handset micro-
phone when using the handset.ON/OFF button enables you to make a
telephone call without lifting the handset.It turns the telephone on and off when
using the speakerphone.HOLD button enables you to place an out-
side caller on hold.OUTSIDE CALLS are announced by a tone
signal repeated every 3.2 seconds. The corre-
sponding outside line indicator will flash
slowly.
INTERCOM CALLS can be tone...

infGzitem DVX InDigital Key Telephone System
ATTENDANT FEATURE OPERATION
Table 420-l Attendant Numbering Plan
loo- 19543 
[Cl438
44 
WI45 
IHI499
55 
WI55 
WI56 
WI566
567 55 [U]
570 [BB]
571572 55 [U]
573
574
575
576
577
578
f3 [=I
6t
601602
603
604
620
621
622
623
624
625
626
627
628
631
632
633+[22]
633+[00]634
635
636mN
638+[0]
638+[%]
638+[#]
(FwDl+(71
(~I+181
(FwDl+(91
(FwDl+(*l641
Station Intercom Numbers
Call Park Location O-7 (system)
Personal Park
Voice Mail Group Pilot Numbers O-7
Hunt Group...

ATTENDANT FEATURE OPERATIONinjinite” DVX I’Digital Key Telephone System
420.3ANSWERING AN OUTSIDE CALL
a. Lift handset.b. Press slow flashing outside line button. (If
your telephone is programmed with 
Fre-ferred Line Answer, you may answer an
outside line by lifting the handset.)
420.4PLACING OUTSIDE LINE ON HOLD
a. If your system is programmed for ExclusiveHold Preference, press HOLD button once
for Exclusive Hold and twice for System
Hold.
b. If your system is programmed for System
Hold Preference,...

inJinitem DVX I’Digital Key Telephone SystemATTENDANT FEATURE OPERATION
2.Enter the three-digit extension number of
the DDIU. The display will show the BAUDrate setting, the data length (8 or 
9), and
the number of stop bits (1 or 2).
To change the baud rate:
1.Press the “HOLD” button. Then enter the
one-digit baud rate desired.
- [ 11 = 300
- [2] = 1200
- [3] = 2400
- [4] = 4800
- [5] = 9600
- [6] = 19.2K
- [7] = 38.4K2. Press the SPEED button to save any
changes made.
To change the character length:1....

ATTENDANT FEATURE OPERATIONinJinitem DVX I’Digital Key Telephone System
will be dialed after a 10 sec. interdigit time-out occurs, or if a 
“#” (pound), is pressed.
*Refer to Sec. 400.37, Flexible Button
Assignment.
Conditions:l The system will dial the station that
matches the dialed name when a
unique match is found. If multiple
names are located (found) after eight
digits, the first one is dialed.l The names will be entered as a part of
the system attributes database. Num-
bers may be entered as part...

infznitem DVX I’
Digital Key Telephone System
ATTENDANT FEATURE OPERATION
86OFF/ 147750ms/50ms
87OFF/ 1633
5Oms/50ms
88No ringNo 
ring
Conditions:l Station users may listen to all tones by
dialing the two-digit codes one after an-other. The tone that is sounding when
the SPEED button is pressed will be
saved as that station’s tone ringing se-
lection.l
A station’s tone ringing selection will be
maintained in a battery protected area
of memory. Therefore if a system expe-
riences a power failure, or a...

infinite” DVX I’ATTENDANT FEATURE OPERATION
Digital Key Telephone System
&Vhen the above procedure is use& your
transmit path is momentarily interrupted
when the dial pad button is depressed.
A flex button can be programmed to decrease
the Handset Receiver Gain using the code
[638]+[%]. Another flex button can be pro-
grammed to increase the Handset Receiver
Gain using the code [638]+[#]. A flex button canalso be programmed to have a certain volume
setting using the code 
[638]+[0 thru 91.*A Flex button...

infznite’“l DVX I’Digital Key Telephone System
ATTENDANT FEATURE OPERATION
Follow instructions provided for storing station
or system speed dial numbers.a. Dial 
[6031 on the dial pad,
orPress pre-programmed* CO Off-Net For-
ward button.
b. Dial the CO group access code of the groupto be forwarded,
or
Press the CO Line button for an individualCO Line for Off-Net forward.
- [81] = CO Group 1
- [82] = CO Group 2
- [83] = CO Group 3
- [84] = CO Group 4
- [85] = CO Group 5
- [86] = CO Group 6
- [87] = CO...