Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

infinite” DVX I’BASIC 
KEYSET FEATURE OPERATIONDigital Key Telephone System
- [9] = busy and no answer calls.
Skipthe precedingstep forimmediate
4.Dial the three-digit Voice Mail group pilotnumber (440-447) for the group (l-8)
where calls are to be forwarded. Confirma-
tion tone will be heard.
5.Replace the handset or press the ON/OFFbutton.
To cancel Call Forwarding:1. Lift the handset or press the ON/OFF
button.
2. Dial the Call Forward Cancel code, 
[662]
on the dial pad,
or
Press the pre-programmed*...

infhitem DVX I’Digital Key Telephone SystemBASIC 
KEYSET FEATURE OPERATION
405.8DIRECTED CALL PICK-UP
When incoming, transferred, or recalling out-
side line ringing, intercom ringing, or Camp On
ringing is heard at an unattended telephone:
a. Dial the station number of the known ring-ing telephone. Receive 
ringback tone, or
call announce tone.b. Press the pre-programmed* PICK UP but-
ton to answer the call.*A flex button must be programmed for this
feature to operate. Refer to Sec. 400.37, Flexible...

BASIC KEYSET FEATURE OPERATIONinfinite” 
DVK I’Digital Key Telephone System
b. Dial the Personal Park code 
(4381 on the
dial pad,
or
Press a pre-programmed* flex button. (callis placed in personal park). Dial tone will
be heard.The user can 
aZtemateZy connect to the
other call bg pressing the TRANS button
and dialing [4381 as many times as
necessary.
Retrieving a Parked Call:a. Dial the Personal Call Park location code
[438] on the dial pad,
or
Press the pre-programmed* PERSONAL
PARK button.
Both the...

infznitem DVX I’Digital Key Telephone System
SLT FEATURE OPERATION
SECTION 410SLT FEATURE OPERATION
410.1INTRODUCTION
This section of the manual contains the operat-
ing instructions for Single Line users. It is de-signed to provide step-by-step instructions for
operating the Single Line telephones in the
system.Literature similar to these operating instruc-
tions has been prepared for use by the customerin the form of a Single Line Telephone User’s
Guide.
410.2ACCOUNTCODE
SLT stations can enter an...

infznite” DVX InSLT FEATURE OPERATION
Digital Key Telephone System
2500 Type
2500 Type 
w/Msg Waiting Lamp on Top
2500 Type w/Message Waiting Lamp
2500 Type Wall Phone2500 Type w/Flash Key
410-2Issue 1, February 1994 

infznitem DVX I’Digital Key Telephone System
SLT FEATURE OPERATION
Table 410-l SLT Numbering Plan
100-195
420 
ma421 
[=a43 
[Cl438
44 
WI45 
[HI55 
WI55 
WI56 
WI566
571572 55 [U]
6# [=I620
621622
623
624
625
626
627
631
633 [ZZ]633 [00]
638+[0-91
638+[%]
638+[#]640
640 
[7]640 
[8]640 
[9]640 
[SAC]660
661 
(YYj662
663
664
Station Intercom Numbers
Voice Mail Enable MSG Wait
Voice Mail Cancel MSG Wait
Call Park Location O-7 (system)
Personal Park
Voice Mail Group Pilot Numbers O-7
Hunt Group Pilot...

SLT FEATURE OPERATIONinfinitem DVX I’Digital Key Telephone System
tone. The ACD supervisor station receivesa “HELP” message if a member of one of
the ACD groups he is assigned to initiatesa “HELP” request. The “HELP” function
also sends a Camp-On tone to the speakerof the supervisors 
keyset. The “HELP”
message takes precedence over any other
message and can be cleared by the super-visor by pressing his “HELP” button.
At the time the supervisor receives a
“HELP” request, he can press his “HELP”
flex...

infmitem DVX I’Digital Key Telephone SystemSLT FEATURE OPERATION
410.8CALL PARK (System)
To place an outside call on hold and consult
with, page, or call an internal party before
transferring the outside call.
While connected to an outside line:
a. Depress and release the hookswitch. The
caller is put on Exclusive hold.b. Dial parking location (430 to 437) on the
dial pad. 
Confirmation tone is heard.
c. If you hear busy tone, depress and releasethe hookswitch and dial another parking
location....

SLT FEATURE OPERATIONinfinitem DVX I’Digital Key Telephone System
c. Replace handset.To cancel Do Not Disturb:
a. Lift handset.b. Dial (6311 on the dial pad or 
[662] on the
dial pad.
c. Replace handset.410.17 PBX/CENTREX TRANSFER (Flash
Command to CO Line)
To initiate a PBX or Centrex Transfer command
from an SLT.
While connected to a PBX or 
Centrex line:a. Briefly depress and release the 
hook-
switch. Intercom dial tone will be heard.b. Dial 
[6601 on the dial pad. A Flash com-
mand will be presented...

infinitem DVX I’Digital Key Telephone System
SLT FEATURE OPERATION
Answering a Message Waiting Indication.
Your message waiting lamp is flashing:
a. Lift handset.
b. Dial 
[663] on the dial pad. Station that left
the message will ring.
Only SLT’s equipped with message waiting
lamp will have access to this feature. Opxstations do not have message waiting
capability.
410.24 OFF-HOOK PREFERENCE
If your phone has been programmed for 
Off-
Hook Preference, you will hear outside line dial
tone when lifting the...