Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

ATTENDANT FEATURE OPERATIONirzfznite” DVX I’Digital Key Telephone System
The DSS LED test will cause all the 
LEDs
to flash at a 15 IPM rate. Once started the
DSS LED test will continue until a DSS flexbutton is depressed. Pressing a DSS flex
button turns on the flex key LED and dis-
plays an LCD message on the associated
keyset identifying the flex key number (01to 48). In addition, it turns off the pre-
viously selected flex LED.
Conditions
l Test mode interrupts the normal opera-tion of a 
keyset or...

in$initem DVX I’Digital Key Telephone SystemATTENDANT FEATURE OPERATION
l The function of Message Access is as-
signed to a station flexible button in
database admin.l A station user may store any of the
available messages under a flexible but-
ton assigned as a Message Access but-
ton.l The ten Custom Messages will be dis-
played in a similar fashion as the
“Canned” messages. The idle station
display will show the message that has
been activated at the station and a call-
ing station will receive the...

ATTENDANT FEATURE OPERATIONinjinitem DVX I’Digital Key Telephone System
To Transfer a Call using Directory Dialing:
While on a call;
a. Press the TRANS button.b. Dial the Directory Dial Code 
[680] on the
dial pad,
orpress a pre-programmed* flex button pro-
grammed for directory dialing.c. Press the SPEED button to automatically
dial the destination station.
d. Hang up to complete the transfer.
Calls may only be transferred to internal
stations only. An attempt to transfer a calloff-net (via a Speed dial...

infInite” DVX I’
Digital Key Telephone System
ATTENDANT FEATURE OPERATION
c. Press the SPEED button to save the entry.Confirmation tone will be heard and the
display will update.
To clear an entry:a. Press the TRANS button. Then press the
FLASH button.
b.Press the SPEED button. Confirmation
tone will be heard and the entry will be
erased.Method Two:
This method may be used to enter names thatwill be associated to the Local Number/Name
Translation Table only.
To Select a different entry in the Directory...

ATTENDANT FEATURE OPERATION
infinitem DVX I’
Digital Key Telephone System3. Press the SPEED button when finished.
Confirmation tone will be heard and the
display will update.
4. Either hang up to end programming or
begin at step “2” to program another Sys-
tem Speed Dial bin/Name combination.420.20 NIGHT SERVICE
a.Any designated attendant can place the
system into Night Service by pressing thepre-programmed Night Service button
(DND).
b. Pressing the pre-programmed Night Serv-
ice button again removes...

infinite” DVX I’Digital Key Telephone System
ATTENDANT FEATURE OPERATION
text messaging may be used to respondto an OHVO call. The message will ap-
pear on the calling station and called
station LCD displays.
l If the calling station is a non-LCD ter-
minal, the called station will receive er-ror tone when responding via text
messaging.
l The called station may press a flex but-
ton programmed as a Text Message but-ton, 
(633+xX]. This flex button can be
pressed and two-digit message number
dialed to...

ATTENDANT FEATURE OPERATIONinfiniteTld DVX I’Digital Key Telephone System
sages. The text messages appear on the callingparty LCD Display.
While receiving a Camp-On, or OHVO call:
a. The called party may press a flexible button
programmed for message access, then dialthe two digit message code (or press a
pre-programmed flex button for a particu-
lar message). Example : [633] + [38] meansthat a telephone calling the station will
receive the message ‘WHO IS IT?“.The additional messages (with their codes)...

infznitem DVX I’Digital Key Telephone System
ATTENDANT FEATURE OPERATION
ATTENDANT with 
DSS/DLS FEATURES
The attendant console may be programmed in
one of five different ways. Therefore, you may
not have all of the features listed below on your
console. Refer to 
Set 320.14 for a description of
each map.420.25 ATTENDANT TRANSFER SEARCH
When attempting to locate a party:a. Press a station button to signal that sta-
tion. If the party is not located, press an-
other station button to continue the...

ATTENDANT FEATURE OPERATIONinfinitem DVX I’Digital Key Telephone System
*Refer to Sec. 400.37, Flexible Button
Assignment.420.34 PAGING
A. External Paging
1.Dial the two-or three-digit External paging
code. Wait for page warning tone.
- [ 76]+[0] = External All Call (Zones l-7)
- [76]+[1] = External Zone 1
- [76]+[2] = External Zone 2
- [76]+[3] = External Zone 3
- [76]+[4] = External Zone 4
- [76]+[5] = External Zone 5
- [76]+[6] = External Zone 6
- [76]+[7] = External Zone 7
2.Speak in normal tone of...

in..nitem DVX I’Digital Key Telephone System
LCD DISPLAYS
430.1LCD DISPLAYS
The display is arranged into an upper and lower
field. The upper field displays the current activ-ity of the telephone. The lower field is divided
into two sections. The left section of the lower
field displays the date,speed bin number, con-
nected intercom station or outside line number.The right section of the lower field displays the
current time or elapsed time on an outside call.The following Table shows what will appear...