Vodavi Infinite 4096 Key Telephone System Installation And Maintenance Manual

Before installing the Battery Charging Unit 
EC) tum off the AC power switch on the kont 
of the EPS. 
To ~nsta.ll the BC, remove the cover 
of the External Power Supply Housing W’S). 
Locate the BC card slot and remove the Battery 
Bypass Board. 
Battery Amp [ Configuration 
Hom=mg ! 16x32 24x48 40x96- 
7AH 1.5HR 1H-R. 20 MIN. 
14AH 2.5HR 2HR. 1HR. 
4oAH 7H-R 5.5HR 3HR, 
The BC unit provides a Tone Emitter switch to 
enable (ONI or disable (OFFI tone signaling 
when System Battery Back Up is active...

INSTUTION Infinite 4096 Hybrid Key Telephone System 
h 12 wxl a.*nWXES (2) 
STFWN RELIEF 
-SINGLE WIRE  0AllERY RACK 
CABLE ASSY ANDSEPARATOR ExlERNAL POWER SUPPLY HCUSING (EPS) 
Figure 600-6 Typical Battery Interconnection Layout 
500.9 PRINTED CIRCUTI’ BOARD IN- 
STALLATION 
The Printed Circuit Boards IPCB’s) used to 
configure the system contain static sensitive 
components that will require a few simple han- 
dling precautions to avoid damage. 
Keep all PCB’s in their protective anti-static 
bags...

In.ite 4096 Hybrid Key Telephone System XlWMLL4TION 
Figure 500-7 DC/DC Converter Unit (DC/DC) 
Issue 1, January 1992 500-g  

INSTALLATION 
Infinite 4096 Hybrid Key Telephone System 
YELLOW 
COLORED 
DIP SWITCHES 
SW2 
l-WRITE MEMORY (EnablelON; Disable&FF) 
2-CLEAR TO SEND (Enable-ON; DisablelOFF) 
3-TRACE OUTPUT (Enable&N; DisablelOFF) 
4-SOFT RESTART (Enable&N; Dkabl~OFF) 
5SMDR (Enable-ON; Disable-OFF) 
6-29 CHARACTER-OFF; 60 CHARACTER-ON 
7-SMDR: CPB-OFF; APL-ON 
B-INITIALIZE (Enable=ON; Dkable=OFF) 
FQ’ure 500-S Central Processing Board (CPB) 
500-10 
Issue 1, January 1992  

800.10 CO/pBx CONNECTIONS 
An FCC approved RJ21X connector should be 
supplfed by the Telco at the demarcation point. 
The RJ21X should be located within 25 ft. of 
the KSU. All CO/PBX line 
connections are 
made on the Pl and P2 cables. The Pl connec- 
tor is located fn the Basic KSU and the P2 
connector In the Expansion KSU. A COB or 
COA card must be installed in the associated 
KSU card 
slot in order for the CO/PBX line 
interface connections to be established. Refer 
to Tables 500-l and 500-2....

INST~TION hJ’inite 4096 Hybrid Key Telephone System 
NORMAL 
SERVICE  WHITE 
COLORED 
TABS 
Figure 500-9 Central Office Interface Board (COB) 
500-12 
Issue 1. January 1992  

Injinite 4096 Hybrid Key Telephone System INSTALLATION 
r 
Table 500-l Pl Connecting Block 
Table 600-2 P2 Connecting Block 
PAIE 
1 
2 
3 
4 
5 
6 
7 
8 
9 
10 
11 
12 
13 
14 
15 
16 
17 
18 
19 
10 
11 
12 
!3 
!4 
!5 PIfi 
26 
1 
27 
2 
28 
3 
29 
4 
30 
5 
31 
6 
32 
7 
33 
8 
34 
9 
35 
10 
36 
11 
37 
12 
38 
13 
39 
14 
40 
15 
41 
16 
42 
17 
43 
18 
44 
19 
45 
20 
46 
21 
47 
22 
48 
23 
49 
25 
- 
COLOF 
WH/BL 
BL/WIt 
W-H/OF 
ORM 
WH/GI+ 
GN/Wli 
WH/Bh 
BN/-WI! 
WH/SL 
SL/wH 
RD/BL 
BL/RD...

:_(  WHITE 
COLORED 
TABS 
! 
C 
C 
A -@!5  3db co 1 
Odb 
3db 8 co2 
Odb 
3bd 
@s co3 
NORMAL 
SERVICE Odb 
3db 
f&J co4 
iii co5 
Odb 
3db CO6 
Odb 
3db 
~fgure 600-10 Amplified CO Interface Board (WA] 
500-14 
Issue 1. January 1992  

Infinite 4096 Hybrid Key Telephone System 
IN!3TALL4TION 
GREEN 
COLORED 
NORMAL 
SERVICE 
 
0 
0 
50-PIN 
STATION 
CONNECTOR 
Figure 50&11 Key Station Interface Board (ICIB) 
Issue 1, January 1992 
500-15  

Table 500-3 Station Connecting Block 
WI Table 500-4 Station Connecting Block 
O=B/OHv) 
PAIR 
1 
2 
3 
4 
5 
6 
7 
8 
9 
10 
11 
12 
13 
14 
15 
16 
17 
18 
19 
20 
21 
22 
23 
24 
25 
PIN 
26 
1 
27 
2 
28 
3 
29 
i-L 
5 
31 
6 
32 
7 
33 
8 
34 
9 
35 
10 
36 
11 
37 
12 
38 
13 
39 
14 
40 
15 
41 
16 
42 
17 
43 
18 
44 
19 
45 
20 
46 
21 
47 
22 
48 
23 
49 
24 
50 
25 COLOR 
WH/BL 
BL/WH 
W-H/OR 
OR/unr 
WH/GN 
GN/WH 
WH/BN 
BNM 
wH/SL 
SL/wH 
RD/BL 
BL/RD 
RD/OR 
OR/RD 
RD/GN 
GN/RD 
RD/BN...