Vodavi Infinite 4096 Key Telephone System Installation And Maintenance Manual

LCD DISPLAYS Infinite 4096 Hybrid Key Telephone Spskm 
Table 410-l 4096 LCD Dkplay~ /COnt’d) 
FUNCTION CALLING STATION’S DISPIAY 
CALLED STATION’S DISPLAY 
Camp-on 
Conference 
Internal Page 
External Page 
AllCallPage 
Meet Me Page 
410-2 
Issue 1, January 1992  

Table 410-l 4096 LCD Diaplapr (Cont’a) 
FUNCTION : CALLING STATION’S DISPIAY 
CALLED STATION’S DISPLAY 
Station call Forward 
(Originalng Station) 
Wame in Display) 
Station No-Answer 
Call Forward 
(Originating Station) 
St&&jn Bu v/No-&p 
swer 
Call Forward 
(Or@nating Station) 
Station Busy 
Call Forward 
[OrlglnaUng Station) 
?oma.rded Call 
Name in Display) 
Issue 1. Jarmary 1992 
410-3  

Table 410-l 4096 LCD Displays (Cont’d) 
FUNCTION 
Forwarded Call 
before and after call is 
answered) 
Station Forwarding 
to a 
Voice Mail Group 
(Station Idle) 
Staff on Forwardfng 
to a UCD Group 
(Statlon Idle) 
Preset Forward 
3aUon calling a 
%&ion Forwarded to 
3 Voice Mail Group 
hclusive Hold 
4104 Issue 1, January 1992  

Infinite 4096 Hybrid Key Telephone System 
LCD DISPLAYS 
Table 410-l 4096 LCD Displays (Cont’d] 
FUNCTION 
Rfnging CO Lines 
CALLING STA-I’ION’S DISPLAY 
CALLED STATION’S DISPIAY 
Display Security 
Feature 
Station Forwarding 
m-Net 
Calling a Station 
Forwarded Off-Net 
CdI.5 in Queue 
(Agents and Overflow 
stattons) 
Calls in Queue 
[using Dial Code) 
Unavailable Mode 
[Agent Station) 
Station calling a 
Voice Mail Group 
?ilot Number 
Issue 1, January 1992 410-7  

In,ite 4096 Hybrid Key Telephone System 
INSTALLATION 
500.1 SITEPLANNING 
The Ir@nf& 4096 Hybrid Key Telephone Sys- 
tem, like most electronic omce equipment. 
should not be subjected to harsh environ- 
mental conditions. To aSSure easy servicing 
and reliable operation, several fxtors must be 
considered when planning the system installa- 
tion. Always remember the following BEFORE 
installing the KSU and wirfng: 
a 
l 
l 
l 
l 
e 
e 
l 
l 
The Basic KSU. Expansion KSU and Ex- 
temal Power Supply...

INSTALLATXON Injinite 4096 Hybrid Key Telephone System 
l RS-232C Module (RSSM) 
0 Power Failure Transfer Unit (PFTJ 
l Battery Charging Board 032) 
l Single Line Ring Generator and Message 
Wait Power Supply (RG) 
Refer to Appendix B for a complete component 
offering and their associated part NUT&EL 
500.3 SYSTEM GROUNDING 
To ensure that the system will operate prop- 
erly, a good earth ground is required. Use of 
the Telco ground (source not mar4 or a metal- 
lic COLD water pipe usually provides a...

In.ite 4096 Hybrid Key Telephone System 
INSTALLATION 
1 17.8” I EXPANSION KSU 13.5” 
I 
17.8” 13.5” BASIC KSU 
DEPTH: 13.3” 
H- 15.8” .-----jj p- 13.5” -Bq 
12.75” + 
POWER SUPPLY 
DEPTH: 12.8” 
Figure 500-2 Mounting Dimensions 
Issue 1, January 1992 500-3  

BASIC KSU 
CCCK K K K K K 
I b”““, I, I I I A 
f=BBBBBB86Bp 
I P (La: 2 34 s c: s 
. 
1 
: ) . 
)o 
C 
I 
0 
C 
C 
0 
N 
V 
E 
R 
T 
E 
)R 
. 
.  CO LINES 
01-24  
FEE-- 
TRANSFER 
ON EXPANSION KSU 
LOUD 
BELL 
-7 
CONTROL 
GROUND - 
TERMINAL 
CABLE RACEWAY 
STATIONS 100-l 47 
EXPANSION KSU LEFT SIDE OF BASIC KSU 
r 
Ill 
I//II 
DC IN 
lilil /II Ill// I///l 
IllI Ilill /III/ Iill 
1//1/ lllll lill llill 
/ 
STATIONS 
148-195  
CO LINES 
25-40 
Figure 500-3 Basic KSU and Expansion KSU 
500-4 Issue 1,...

Infiite 4096 Hybrid Key Telephone System 
INSTALLATION 
a hm3-t 4 (#lo or larger) screws into the 
backboard and tighten enough to hold the 
weight of the KSU. Lift the KSU and place 
it onto the screws. When the KSU is in 
position. the screws can be tightened and 
the KSU is securely mounted. 
500.6 
LIGHTNING PROTECTION 
The [email protected]& 4096 Hybrid Key Telephone System 
should have Central Office lines and OPX sta- 
tions protected with proper lightning surge 
arresters. This will provide protection from...

XNSTALLATION Infinite 4096 Hybrid Key Telephone System 
4096 Power Supply (PS) 
MODEL 
GPS7A 
INPUT 
0 :. ‘. OuTPur OUTPUT 
24V DC 
10A MAX 
k9+ 
II 
@ GND 
i3 - 
5A 
125V AC Exbrnal Power SqpIy Housing - Right Side 
@?I 
GNO 
UllON: Remove the shorting strap from 
battery connecting terminals on the right 
e of the EPS before connecting batteries. 
Figure 500-A Ext. Power Supply Housing 8 Power Supply 
500-6 Issue 1. January 1992