Vodavi Infinite 4096 Key Telephone System Installation And Maintenance Manual

&#nite 4096 Hybrid Key Telephone System 
l%U’URE DESCRIFTION 
B. 
C. 
will not hunt but receive call progress 
tones of the extension dialed. 
St&on Hunting 
Incoming CO, transferred CO, and inter- 
com calls that are presented to a busy, or 
DND station. that is a member of 
a Station 
Hunt group, will search sequentially (in 
the order the extensions were entered in 
data base prom for an idle station 
in the group and will ring that station. 
Calls can also be directed to the groups 
pilot number for...

F. 
G. 
I-I. 
I. Insert/Delete Tables 
There are 20 Insert/Delete Tables. Up to 
20 digits. including pauses, can be in- 
serted and up to 16 digits deleted. Digits 
can be inserted before or after the number 
dialed. but can be deleted only from the 
beginning of a number dialed. 
Weekly Time Table8 
The least costly mute for a particular di- 
aled number may be different at dlffercnt 
times of the day and on different days of 
the week To accommodate this situation, 
there are 2 Time-of-Day tables -...

Infinite 4096 EyMd Key Telephone S-tern 
FEATURE DESCRIPTION 
300.84 NAME IN LCD DISPIAY 
This feature allows every extension (Key or SLV 
the capability to pm the users name, for 
that station. so that people using display tele- 
phones will see the name instead of the station 
number on their display. The name is pro- 
grammed at each station by the user into 
station speed dial bin 00. When a name is 
programmed, the bin (00) is no longer used for 
station speed dial. The name may be up to 
seven (7)...

FZATUREDESCRWTION In$.nite 4096 Hybrid Key Telephone System 
E. User Programmable Preferena 
Based on a station programmable option 
Key stations may be given the ability to 
enable, disable or change their off-hook 
preference by dialing a code. TNS option 
can be denied in station programming on 
a per key station basis. 
300.87 OFF-HOOK SIGXWUJNG 
If a station has been programmed to receive 
direct outside tie ringing and is busy on an- 
other call, that station Mll receive muted ring 
to indicate...

Infiite 4096 Hybrkl Key Telephone System FEATURE DES-ON 
A Personalized Messaqe Code QP s Flex 
This feature allows a key station user to 
program the pre-selected meSSage code 
1781 under a Flex key. This speeds access 
of the pre-selected messages. 
300.90 PHONEBOX 
A 
Phone Box may be substituted for a tele- 
phone on a one for one basis. The phone box 
can be used to receive intercom an- 
nouncements and also provide handsfret re- 
sponse. There is also a CALL button which will 
signal all stations...

FEA’IURE DESCZRPTION Infinite 4096 Hybrid Key Telephone System 
accessed by a telephone modem linking the 
CPB’s RS232 connector (via a CO line) to a 
remote location. 
300.104 REadOTE S- MONITOR AND 
-cE 
A RemoteSystem Monitor 
The Remote Monitor feature provides re- 
mote access to the installed system for 
diagnosttc purposes. These capabllities 
benefit Se-e personnel enabling them to 
support the end user remotely. Different 
levels of access, via password, allows 
authorized personnel to trace,...

mite 4096 Hybrid Key Telephone System 
I’EATUHE DES-ON 
Numbers are dialed by use of the SPD button 
and a two-diglt code. Th& feature can addi- 
tionally he assigned to any of the 22 buttons in 
the flexible button field on each keyset for 
one-button activation. 
300.111 6YsTEM CXPACITY 
A. Up to 24x48 [email protected] 
Without the Expansion KSU, the 4096 
system will support a maximum of 24 
outside CO circuits and 48 stations cfr- 
cuits. 
B. Up to 40x96 Comtion 
With the addition of the Expansion Cabi-...

m=DESCRWTION &finite 4096 HyMd Key Telephone System 
LCD wi.l.l display, on a reai time basis, the 
number of caJls in queue for that group. 
F. UCD Allto wrapup wa/ Timer 
After completion of a UCD call (on-hook) 
the agent will not be subjected to another 
UCD call for the duration of the Auto 
Wrap-Up timer (regardless of the number 
of calls in queue), allowing the agent to 
finish call related work 
or access other 
facilities. This will allow agents to remove 
themselves from the group (le. DND....

Single Line telephones have access to most of 
the system and station features listed in the 
previous section, however, the additional fea- 
tures listed below are unique to Single Line 
Telephones. (An APL and a Ring Generator in 
addition to SIB or OPX cards must be installed 
fn the system for proper SLT operation) 
300.120 ACCOUKT CODE 
SLT stations may enter an account code, up to 
12 d&Its in length, to ident@ calls for bill- 
ing/tracking purposes. The account code may 
be entered either before...

300.133 MESSAGE WAITING INDICATION 
Industry standard meSSage waiting single line 
telephones can have up to five (5) message 
waiting indications left for them, fmm other 
stations. The message waiting LED will flash at 
the called station. 
300.134 NIGET SERVICE 
When outside lines are marked UNA and the 
system is placed into night servlce. a single line 
telephone can answer incoming calls on lines 
it does not normally have access to by dialing 
[71 [5j. An external ringing device must be 
provided....