Vodavi Infinite 4096 Key Telephone System Installation And Maintenance Manual

400.68 CALA PARK (System) 
To place an outside call on hold and consult 
with. page. or call an internal party and/or 
transfer the outside call. 
While connected to an outside line: 
a 
b. 
C. 
Depress and release the ho&switch. 
The caller is put on Exclusive hold. 
Dial parking location (790 to 7951. Hear 
con&mation tone. 
If you hear busy tone, depress and re- 
lease the hookswltch and dial another 
parking location. 
Retrieving a Parked Call 
a Lift handset. 
b. Dial pound [#I on the dial pad. 
c....

FEATURE OPERATION Infinite 4096 Hybrid Key Telephone System 
400.76 
DO NOT DISTURB 
Activating Do Not Disturb: 
a L&handset 
b. Dia.l[#l] onthedlalpad. 
c. Replace handset. 
To cancel Do Not Dlsturh: 
a. Lifthandset. 
b. Dial [#l] or [#8j on the dial pad. 
c. Replace handset. 
400.77 PBx/cEmRExTRAN8FER 
(Flash Command to CO Une) 
To initiate a PBX or Centrex Transfer com- 
mand from an SLT. 
While connected to a PBX or Centrex tie: 
a BrIefly depress and release the hook- 
switch. Intercom dial tone...

XnjTnite 4096 Hybrid Key Telephone System 
F73muRE OPERATION 
400.86 PERSONALIZED MESSAGES 
Each station can select a pre-assigned mes- 
sage to be displayed on the LCD of any Key 
Telephone calling that 
station. To select one 
of the ten available messages: 
a Dial I781 on the dial pad. 
b. Dial the two-digit code for the message 
which will appear. 
00 clear messages 
01 VACATION 
02 
REXURNMORNING 
03 FtElURN AFIERNOON 
04 
RElURN TOMORROW 
05 REIURNNEXI’WEEK 
06 BUSINESS TRIP 
07 M.EEXNG 
08 HOME...

FEXTURE OPERATION Ing?.nite 4096 Hybrid Key Telephone System 
400.92 SPSTEM SPEED DIAL 
a ufthandset. 
b. Dial I#91 on the dial pad. 
c. Dial desired system speed bin number 
(20-99). 
400.93 
UNWERSS NIGHI’ ANSWER 
Upon hearing an incoming signal: 
a Lift handset 
b. Dial UNA access code 1751. You will be 
connected to ringing outside line. 
a.94 UCD AVAILABrp;/UNAVAILABLE 
If you are a UCD Agent. you may 
place your 
station in the Available mode to receive UCD 
type of calls or you may place your...

Injhzite 4096 Hybrid Key Telephone System FEA’IZTRE OPERATION 
a Press outside line button flashing at a 
very fast rate. 
b. Lift handset to converse. 
400.102 DIRECTORY DIALADmSTRA- 
TION 
Names may be programmed into the dfrec- 
tory dialing list fmm the 0rst assigned atten- 
dant station. The system aJlows up to 200 
names to be programmed into the directory. 
Each name can be associated to either a 
Station in the system or a System speed dial 
binandcanbeupto24charactersinlength. 
Names are...

3. Press the SPEED CALL button when 
finished. Confirmation tone wffl be 
heard and the display will update. 
To enter the Intercom number or system 
speed 
dial bin to be associated to the name: 
1. Press the TRANS button. 
2. Then enter either a three-digit station 
intercom number (100-1951 
Eial a three-digit System speed dial 
number (020-099). 
3. Press the SPEED CALL button to save 
the entry. Confirmation tone will be 
heard and the display will update. 
To clear an entry. press the FLASH button...

Canceling Off-Net Forwarding 
a. Dial [296] on the dial pad: 
or 
Press pre-programmed CO Off-Net For- 
ward button. 
b. 
Dial the CO group access code. 
C. Dial [#I on the dial pad. Confirmation 
tone is heard. 
400.106 NIGHT SERVICE 
Any designated attendant can place the sys- 
tem into Night SeIvice by: 
a. Pressing the Night Service button 
mm. 
b. Pressing the Night Service button again 
removes the system from Night Service. 
77~ Attedant stationlsl do not hate DIVD 
CapabiLitieS. 
400.107 SETTING...

400.114 CAU TRANSFER 
Outside lines can be transferred from one 
phone to another within the system. The 
transfer can be either screened (announced) 
or unscreened to either an idle or busy sta- 
tion. 
Screened Transfer 
a. 
b. 
C. 
While connected to an outside line. press 
station button where call is to be trans- 
ferred (if programmed on your tele- 
phone), or press ‘IRANS button and dial 
station number (100 to 195). 
The called extension signals according 
to the intercom signal switch position....

Infinite 4096 Hybrid Key Telephone System FZUUR.E OPERATION 
C. All Call Paging U.ntemal/ErtcmaU 
1. Press pre-programmed’ PAGE button: 
or 
Dial [‘O] on the dial pad. 
2. Speak in normal tone of voice to deliver 
message. 
3. Replace handset to terminate page an- 
nouncement. 
400.119 REIXASE BUTTON 
DSS/DLS map 1 contains a Release button 
that may be pressed to disconnect or termi- 
nate an intercom call, transfer sequence, 
page announcement or CO call. 
Issue 1. January 1992 400-27  

Infinite 4096 Hybrid Keg Telephone System LCD DISPLAYS 
410.1 LCD DISPLWS 
The 
display is arranged into an upper and 
lower field. The upper field displays the current 
acutity of the telephone. The lower field is 
divided into two secttons. The left section of the 
lower field displays the date, speed bin num- 
ber, connected intercom station or outside line number. The right section of the lower field 
displays the cm-rent time or elapsed time on an 
outside call. The following Table shows what 
will...