Vodavi Infinite 4096 Key Telephone System Installation And Maintenance Manual

In.ite 4096 Hybrid Key Telephone System sYSTl3M PARAMETERS PROGRAMMING 
System Parameters Pmgmmming (Cont’d] 
710.9 PAGING TIMEOVT TIMER 
Progr~ Steps 
If this timer is to be changed: 
a Press FLASH and dial [OS]. The following 
message is shove on the display phone: 
b. Enter two digits on the dial pad. 
c. Press HOLD button. Display will now up- 
date. 
710.10 
CO RING DETECT TIMER 
Programmirg Steps 
If this timer is to be changed: 
a Press FLASH and dial [lo]. The following 
message is shown on the...

System Parameters Rugramming (~nt’dl 
710.11 EOLD PREIrEImNcE 
If this feature is to be changed: 
a Press FLASH and dial [ll). The following 
message is shown on the display phone: Descriptton 
me system may be programmed to have either 
EehMve or System Hold preferred. If EXC~U- 
sfve Hold is preferred. the user will press the 
HOLD button once for Exclusive Hold and 
twice for System Hold. If System Hold is pre- 
ferred. the user will press the HOLD button 
once for System Hold and twice for ESrclusive...

Infinite 4096 Hybrid Key Telephone System 
SYS’I’E&I PARAMETERS PROGRAMMING 
System Parameters Programming (Cont’d) 
710.13 EXTERNAL NIGHT RING 
Pro&g 
’ g Steps 
If this feature is to be changed: 
a. Press FLASH and dial [131. The following 
message is shown on the display phone: 
b. To make a change. press the top left but- 
ton in the flexible button field. It will 
toggle on and off with each depressfon 
l LEDoff=no 
l LED on = yes 
c. Press HOLD button. 
710.14 ATTENDANT OVERRIDE 
f3xmmhg Steps 
If...

System Parameters Programming (Cont’dl 
710.15 ATTENDANT STATION 
R-ogrammhg Steps 
If Attendant Stations are to be changed: 
a Press FLASH and dial [ 151. The following 
message is shown on the display phone: 
b. Enter up to three(3) three-digit station 
number(s) on the dial pad. 
c. Press HOLD button. 
710.16 LOUD BELL CONTROL 
Programm~ Steps 
If this feature is to be assigned: 
a Press FLASH and dial (161. The following 
message is shown on the display phone: 
b. Enter a 0 or a 1 to indicate if a...

Injinite 4096 Hybrid Key Telephone S-tern SYSTEM PAIhUEERs PROGRAMMING 
System Parameters Programmhn (Cont’a] 
710.17 PBX DIALING CODES 
gramdng Steps 
IfPBXIkdhgCodesaretobeassIgned: 
a Press FUSH and dial 117. The following 
message is shown on the display phone: 
b. Enter two digit code numbers, one right 
after the other, on the dial pad up to a 
maximum of ten digits. 
c. Press HOLD button. Description 
Five one or two-digit PBX access codes can be 
programmed into memory. When dialed. these 
codes...

SYSTEM PARAMETERS PROGRAMMING Winite 4096 Hybrid Key Telephone System 
System Parameters Programming (Cont’dl 
710.18 -/S-ARY PAlRS 
pro&p ’ .x Steps 
IfExecuUve/Secretary pairs are to be assigned: 
a Press FLASH and dial 1181. The following 
message is shown on the display phone: 
b. 
C. 
d. 
e. 
f. 
g. 
h. The top left button in the flexible button 
f3eld will be lit indicating the first pair may 
be programmed. 
Enter the three digit 
number. 
Enter the three digit 
number. 
F’ress HOLD button....

Infinite 4096 Hybrid Key Telephone System 
SYSTEM PARAMETERS PROGKWMING 
System 
Parameters Pmgramming (Cant’s) 
710.19 STATlON MESSAGE DETAIL RE- 
CORDlNG (SMDRI 
R ’ ., Steps 
If Station Message Detail Recording is to be 
used: 
1. Press FLASH and dial [201. ?he following 
message is shown on the display phone: 
To program SMDR features, use the flex- 
ible button(s) as defined in the following 
procedures. 
The SMDR TYPE. PRINT, and ACC but- 
tons toggle on and off. 
After all entries are made. press...

SYSTEM P-RS pROG-G Infinite 4096 Hybrid Key Telephone System 
STATION MESSAGE DETAIL RECORDING 
(Cont’d) 
D. Character Print Assignment 
FTog 
* g Steps 
1. Press PRINT flexible button (Button #3) to 
determIne the print format of SMDR re- 
cords. 
* LED ON = 80 Character is enabled 
l LED OFF = 29 Character is enabled 
2. Press HOLD button to accept the data. Description 
The system can ix programmed to print indi- 
vtdual SMDR records in either a l-line 80 
character format or a 34ne 29 character for-...

InJinite 4096 Hybrid Key Telephone System SYSlTX PARAMETERS PROG-G 
System Parameters Rogrammlng (Cont’cil 
710.20 SET ADMM. PASSW0R.D 
Progr~ Steps 
If this feature is to be assigned: 
a Rss FLASH and dial [21]. The following 
message is shown on the display phone: 
b. Enter four digits between 0000 and 9999. 
c. Press HOLD button. 
710.21 DIAL PULSE PARAMETERS 
Progr~ Steps 
If this feature is to be assigned: 
a Rss FLASH and dial [221. The following 
message is shown on the display phone: 
b. To...

SYSTEM PARAMETERS PROGRAMMING 
Infinite 4096 H-d Key Telephone System 
System Parameters Programminn (Cont’dI 
710.22 
Ia2 ENABLE 
Programming Steps 
If this feature is to be assigned: 
a. Press FLASH and dial (231. The following 
message is shown on the display phone: 
b. The 
top left button of the flexible button 
field wIU toggle on and oa 
l LED on = yes 
l LEDoff=no 
c. Press HOLD button. 
710.23 DISA ACCESS CODE 
Frognrnrning Steps 
If this feature is to be assigned: 
a Press FLASH and dial [24]....