Vodavi Infinite 4096 Key Telephone System Installation And Maintenance Manual

STATION PROG RAMMING (Cont’d) 
IL Preferred Line Answer 
Profpmming Steps 
1. Press the PLA flexible button (Page A But- 
ton #5). 
l LED on = Preferred Line Answer is al- 
lowed 
l LED off= Preferred Line Answer is de- 
nied 
2. Press the HOLD button to enter data 
F. Executive Override 
Programming Steps 
1. Press the EXEC flexible button (page A, 
Button #6). 
l LED on = Executive Oven-lde is allowed 
l LED off= Executive Override is denied 
2. Press the HOLD button to enter data, 
[ CAUTION: USE OF...

STATION ATTRIBUTES PROGIWHMXG @mite 4096 Hybrid Key Telephone System 
STATION PROGRAMMIN G (Cont’d) 
H. Least Cost Routing - Forced 
pr0g ’ f Steps 
1. Press the FWR flexible button lpage A, 
Button #8). 
l LED on = Least Cost Rout&@ is forced 
l LED off= Least Cost Routing is optlonal 
2. Press the HOLD button to enter data 
I. LCR Class of Service 
Programming Steps 
1. Press the LCOS flexible button (Page A. 
Button #9). 
2. Enter a one-digit number between 0 and 
6 to correspond to the LCR Class of...

STATION PROGRAMMIN G (Cont’d) 
Page B Featnre Programming 
Pr0gnmmh-g Steps 
The remaining station features are located and 
programmed on Page B. 
a. Press Ipc B] button. The display of cur- 
rent programming for those features will 
appear as follows: 
..:>z.. :::::: ::::.:.:.:.:..:.:.,:.:. +.:::::::i:::.::‘:. ..::..:. . . . . . . :.. .I> .y,:- ‘:i$.$zcF .::,:,: :::::. ... .....:::  . . i.: ii :” ..,. 
::.:.:.:.:.):.):,:.:.:...~.~,...’... . . . . . . . . . ,.,.,.,..,.,... ,...,..., :: .:.:.::.:,. . . ....

STATION ATTRIHUI-ES PROGFWMMING Injinite 4096 Hybrid Key Telephone System 
DSS Console Map 1 DSS Console Map 2 
DSS Console Map 3 
F+igure 730-l DSS Console Maps l-3 Button Assignment 
730-6 Issue 1. January 1992  

Injinite 4096 Rybrid Eey Telephone System STATION ATTRIBUTES PROGRAMMZNG 
STATION PROG- G (Cont’d) 
L. Station Class of Service (COS) 
m Steps 
1. Press the COS flexible button 
Button #2). Page B. 
2. Enter a two-dfglt Class of Service entry as 
follows: 
l 1stdigltfsdayCOS 
l 2nddQitlsnlghtcOS 
The six classes of service are: 
1= unrestrkted 
2= governed by Table A 
3= governed by Table B 
4= governed by Tables A and B 
5= no O.l,*,# as fkt digit, 7 digits max. 
6= fntercom only (no CO Line access) 
3....

STATlON AMXIB- PROGRAMMING Inj?nite 4096 Hybrid Key Telephone System 
STATION PROG RAMMING (Cont’d) 
N. 
Pick-Up Group(s) Program- 
Pro@ g Steps 
1. Press the PKUP flexible button (Page B, 
Button #4). 
2. Enter a one-to-four dIgit number to pro- 
gram pickup groups. 
0= no group 
l= Group 1 
2= Group 2 
3= Group 3 
4= Group 4 Description 
FXLP. Each station is assigned into pick up 
groups. Stations can be in any combination of 
the four groups or in no group at all. 
Default: By default, all stations...

STATION PROG FLAX?dmG (Coti’d) 
020-099x 
1 oo- 19% 
590-597= 
690-697= 
690-897x  P. 
1. 
2. 
FwgramJ-rllng steps 
l+~ the PiEFW fltible button i-e 8. 
Button 61. 
Enter a time-d.!g~t number to detemc 
the destination where calls arc to 
be 
muted when the preset forward timer cx- 
pl3-W. 
System Speed Bina 20-99 for cc-nc! 
forwarding 
StaLlon Numbers 
Hunt Cruups 1-8 
Voice Maa Cmups l-8 
UCD Groups 1-8 
3. 
Press the HOLD button to enter data Xs- 
play now updaks. DcscrlpUon 
m. This raturt ailow~...

STATION PROCRAMMIN C (Cont’d) 
9. Co be Group Accur 
B stem3 
1. Press tic ACC flexlbIe button page 8, 
Button 117). 
2. Enter up to 5even digits (0. or 1-n for the 
outsfde Une groups the stallon wtil haw 
access 
to. 
0 =no aaxss 
1 =acctss to Croup 1, Code 9 or 81 
2 =aczess to Croup 2. Cw!e 82 
3 =access to Croup 3. Code 83 
4 =access to Group 4. code 84 
5 =access to Group 5, Code e5 
6 =arxess to Group 6. C& 86 
7 =acxx3s to Group 7. CcKic 87 
3. ?rtss the HOLD button to enter data Dcxrlptfon 
ACC....

station Atbibutts Prom cont’dl 
R 
1. Flexible Button m@ammin# 
m steps 
pnss the FLEX flexible button (Page B, FLEX. When programmmg flexible buttons. 
Button #8). The following message is Orst enter the two digit button number to be 
shown on the display phone: programmed (01 to 22). 
2. Enter the button information as follows: 
where: BB= Button number (01-22) 
To assign a button as a multi-function button 
(user programmable) enter: 
BB [O] HOLD 
To assign a button as a CO Line button, 
enter: 
BB [...

STATION PROC RAnQQNG (Cont’dl 
S. Displrpy Fkd~le Buttonr 
#gammmg steps 
Description 
1. Press the DSP flodbie button (page B. 
Button #9l. DSP. Any time a display of button program- 
ming (default or change4 fs needed, press the 
2. The programming assgnment on four but- DSP button (button 91 on Page B and it w!Il 
tons WI.U be displayed starung with the display four buttons’ programming assign- 
lowest button number. With each sub-se- menta MarUng with the lowest button num- 
quent depression of the...