Vodavi Infinite 4096 Key Telephone System Installation And Maintenance Manual

Infinite 4096 Hybrid Keg Telephone System STATION ATTRIBUTES PROGFMMMING 
STATION 
PROGRWIMIN G (Cont’d) 
T. Automatic Privacy (Per Station) 
Pr0jpmxm-g Steps 
To program statiods) for Automatic Privacy: 
1. Press the PRIV flexible button (Page B, 
Button #13). 
l LED on = Automatic Privacy is enabled 
on Stations(s) 
l LED off = Automatic Privacy is disabled 
on Station(s) 
2. Press HOLD button. Display now updates. 
NOll3:[email protected] 
plagwhenAutmaiicPrivacyisenabledinStu-...

STATION ATTRIBUMZS PROGRAMMING Infinite 4096 Hybrid Key Telephone System 
STATION PROGRAMMIN G (Cont’d) 
U. Off-Hook Preference Pro@amming 
FY0g ’ ,. Steps 
To program a station for Off-Hook Preference; 
1. Press the OHP flexible button (Page B. 
Button# 14). The following message is 
shown on the display phone: 
2. Enter the two-digit button number (0 l-22) 
or (00) to indicate no spectic button is 
preferred. SLT’s use 0 1 to enable or 00 to 
disable. 
3. Then, enter either 0 
or 1 where: 
0 = Disable...

SECTION 740 
UNIFORM CALL DISTRIBUTION 
740.1 UNIFORBI CALL. DISTRIB~ION 
WW 
A UCD Group Programming 
If UCD Groups are to be assigned: 
1. Press FLASH and dial [19]. The following 
message is shown on the display phone: Description 
There can be eight UCD groups of no more than 
Where: 
AAA= Alternate UCD Group Assignment 
2. 
BBB= UCD Overflow Assignment 
###= UCD Station(s) Assignment(s) 
The top left button in the flexible button 
field will be lit for programming UCD group 
890. To change UCD...

UNIFORM CALL DISTRIBVTION Indite 4096 Hybrid Key Telephone System 
UNIFORM CALL DISTRIBUTION (Cont’dl 
C. 0~2i-flow Station Assignment 
Pr0.gnmmh-g Steps 
To program UCD Overflow station: 
1. Press the OVR fl&ble button (Button 
# 10). 
2. Enter the three-digit station number ( 100 
to 195) to designate the UCD Groups over- 
flow station. 
3. Press the HOLD button to enter the data. 
D. UCD Station Assignment(s) 
Programming Steps 
To program stations into a UCD group: 
1. Press the STA flexible button...

Uniform Call Dlstributlon (Cont’dJ 
740.2 UCD TIMERS 
gramming Steps 
If UCD timers are to be changed: 
a Press FLASH and dial 1331. The following 
message is shown on the display phone: 
A UCD Ring Timer 
Programming Steps 
To 
make a change to the UCD Ring Timer: 
1. Press the RING flexible button (Button 
#l). 
2. Enter the three-digit timer value on the 
dial pad which corresponds to 000-300 
seconds. 
3. Press HOLD button. Display will now up- 
date. 
B. UCD Message Interval Timer 
Programming Steps...

UCD TIMERS (Cont’d) 
C. UCD OverBow Timer 
Programmirg Steps 
Description 
To make a change to the UCD Overflow Timer. 
1. Press the OVR flerdble button (Button #3). 
2. Enter the three-digit value on the dial pad 
which corresponds to 000-600 seconds. 
3. Press HOLD button. Display will now up- 
date. The UCD Overflow Timer determines the total 
length of time a caller will remain in queue for 
a particuhr UCD group. When the timer ex- 
pires. the caller will be routed to the designated 
overflow...

Injinite 4096 Hybrid Key Telephone System 
UNIFORM CALL DISTR~BVTION 
Sy8tem Parameters Programming (Cont’d) 
740.3 ANNOUNCEMENT TABLES 
Pro~-amming Steps 
If Recorded Announcement devices are in- 
stalled to operate with UCD, these tables must 
be programmed: 
a. Press FLASH and dial [34]. The following 
meSSage is shown on the display phone: 
b. 
A sblng of six. seven, or eight digits is 
entered on the dial pad. The order of data 
entry will be: 
Table Number: 
1= Table 1 
2= Table 2 
Type Number? 
o=...

Infinite 4096 Hybrid Key Telephone System 
VOICE MAIL GROUPS (VMj 
SECTION 745 
VOICE MAIL GROUPS (VM) 
745.1 VOICE MAIL GROUPS 
A. voice Mail programming 
Progrzmdng Steps 
If Voice Mail Groups are to be programmed: 
1. Press FLASH and dial (361. The following 
message is shown on the display phone. 
Where: 
g= voice mail group number (O-7) 
AAA= alternate group (690-697l 
L= ‘Leave” mail index from outpulsing 
table for leaving messages (O-7) 
R= ‘Retrieve” mail index from outpulsing 
table for...

VOICE MAIL GROtJPS CVM) Infinite 4096 Hybrid Key Telephone System 
Voice Mail Groupa (Cont’dl 
B. Alternate Voice Mail Group Assignment 
Pr0jpmmh-g Steps 
To program an alternate group: 
1. Press the AA4 flexible button (Button #9). 
2. Enter the three-digit pilot number (690 to 
697) of the desired group. 
3. Press the HOLD button to 
C. “Leave” Mail Index Entry 
Rogrammfng Steps 
To specify the “Leave” mail index (outpulsing 
table) to be accessed by a Voice Mail group: 
1. Press the L flexible button...

Infinite 4096 Hybrid Key Telephone System VOICE MAIL GROUPS (vhl) 
Voice A&ail Groupe (Cont’d) 
E. Voice Mail Station [email protected]~s) 
gr- Steps 
To program the stations in the Voice Mail 
group: 
1. Press the STA flexible button (Button # 12). 
2. Enter the three digft station numbers. A 
maxhnum of eight SLT stations may be 
entered. 
3. Press the HOLD button to enter the data. Description 
Up to eight (8) SLT or OPX port extension 
numbers may be programmed into a Voice Mall 
gmuP. 
The ports will be...