Vodavi Infinite 4096 Key Telephone System Installation And Maintenance Manual

Infiite 4096 Hybrid Key Telephone System SYSTEM PARAMETERS PROGRAMMING 
System Parameters Programming (Cont’d) 
710.24 PHONE BOX RING TIMER 
Programming Steps 
If this timer is to be changed: 
a Press FlASH and dial 1251. The following 
message is shown on the display phone: 
b. Enter two d&Its on the dial pad. 
c. Press HOLD button. 
710.25 ATTENDANT DEDICATED INTER- 
COM 
Frogramming Steps 
If this feature is to be assigned: 
a. Press FLASH and dial 1261. The following 
message is shown on the display...

SYSTEM PARAMETERS PROGRAMMING h&kite 4096 Hybrid Key Telephone System 
System Parameters Programming (Cont’dl 
710.26 MUSIC CEANXEL 
Progx ’ .< Steps 
If Background Music is to be enabled/dis- 
abled: 
a Press FLASH and dial (271. ?he following 
message is shown on the display phone: 
b. Enter one digit on the dial pad. 
l LED on = Background Music 
l LED off = No Background Music 
710.27 -ING 
SYSTEM TIME’ AND 
DATE 
ProgrB Steps 
To set the time and date which appears on 
display Key Telephones: 
a....

Injinite 4096 Hybrid Key Telephone System SYSTEM PARAMETERS PROG-G 
System Parameters Programming (Cont’d) 
710.28 SLT HOOKSWITCH TIMER 
Prog ’ g Steps 
lf this timer f.s to be changed: 
a. Press FLASH and dial (291. The following 
message is shown on the display phone: 
b. Enter a two digit number on the dial pad. 
c. Press HOLD button. Description 
This timer determines how long an SLT user 
should press the hookswitch in order for it to 
be considered 
a tid on hook (disconnect) 
request An on-hook...

S-tern Parameters Programming (Cont’d) 
710.30 PAGE WARNING TONE 
Programming Steps Description 
If this feature is to be changed: 
a Press FLASH and dia,l (3 11. The following 
message is shown on the display phone: Determines whether a page warning tone will 
be sounded over the Key Telephone speakers 
or external paging speakers, prior to the page 
announcement. 
b. Toggle the top left button in the flexible 
button field on or off: 
l LED on = yes 
l LEDoff=no 
c. Press HOLD button. 
710.3 1...

Infinite 4096 Hybrid Key Telephone System SYSTEM PAR4MEZERS PROGRAMlLmYG 
System Parameters Progrrng (Cont’dl 
710.32 CALL FORWARD NO ANSWER 
TIMER 
ing Steps 
If this timer is to be changed: Description 
The Call Fonvard No answer 
timer is used 
a Press FL4SH and dial [351. The following 
message is shown on the display phone: when a station in the system specines that “no 
answer- calls be forwarded to another station. 
The timer determines how long an intercom or 
transferred call will ring before it...

SYSTEM PARAMETERS PROGRAMMING InJiniLe 4096 Hybrid Key Telephone System 
System Parameters Prograxnmmg 
(COntd) 
710.33 HUNT GROUP8 
A Hunt Group Programming 
R0g . g Steps 
If Hunt Groups are to be assigned: 
1. Press FLASH and dial [381. The following 
message wiJl be shown on the display: 
The top left button in the flexible button 
field will be ltt for programming Hunt 
Group 590. To change Hunt Groups 
or 
enter a different Hunt Group, press the 
appropriate flezdble button 1-8 (590-597) 
and...

Inmite 4096 Hybrid Key Telephone System SYSTEM PAMMETERS PROG-G 
System Parameters Programming (Cont’dl 
710.34 WEEKLY NIGITT MODE SCHEDULE 
Rogrammfng Steps 
If entries or changes need to be made to this 
schedule: 
a Press FLASH and dial 1391. The following 
message will then be shown on the dis- 
PLay: 
A. 
1. 
B. 
1. 
2. 
3. 
C. 
1. Automatic/Manual Operation 
gramming Steps 
Press the AUTO/MAN flexible button (But- 
ton #l). 
l LED on= Automatic Night Mode 
* LED off= Manual operation. 
Day of Week...

SYSTEM PARAMETERS PROGRAMMING InJinite 4096 Hybrid Key Telephone System 
System 
Parameters Programming (Cont’a) 
710.35 SLT DTMF RECEIVER TIMER 
FYogrammmg Steps 
If the SLT DTMF Receiver Timer is to be 
changed: 
1. Press 
FLASH and cifal [41]. ?he following 
message will 
then be shown on the dfs- Description 
Single line telephones require the use of a 
DTMF receiver when going off-hook and dlal- 
ing. When SMDR or toll re&ricUon, (via COS 
assignments) is enabled in the system a DTMF 
receiver will...

System parameters Proving (Cont’dl 
710.36 DIRECTORY DXAKNG 
Fro.~amm~ Steps 
Enter, Change, Erase or to just View entries 
ind the Directory Dialing list: 
a. Press FLASH and dial [43].The following 
message will then be shown on the dis- 
Play: 
Where: 
nnn= Programmed Name (blank if none). 
AA= Directory List Entry Number 
(OOO- 199) 
XXX= Either a Station Number or a 
System Speed dial bin Number 
The Flexible Buttons will be mapped as follows: 
Flexible button 12 will be lit for selectktg a...

SYSTEM PARAMETERS PROG-G In$.nite 4096 Hybrid Key Telephone System 
System Parameters Pmgrring (Cont’dl 
DIRECTORY DXAUNG (Cont’dl 
Progriamming Steps 
To Enter or Change the current name show-n 
on the d&pa@ 
a F’ressFLEXBUrrON2@WME) 
b. Then enter the name (up to 24 characters 
may be entered) by using keys on the dial 
pad as follows: 
G=14 
H=‘4 
I=#4 
J=15 
K=‘5 
L=#S M=16 
N=*6 
0=#6 
P=17 
Q=‘l 
R=*7 
S=#7 T=18 
U=‘8 
V=#8 
w=19 
x=*9 
Y=#9 
Z=#l 
c. Ifan error is made while entering the name...