Home > Toshiba > Integrated Telephone System > Toshiba Dp5018ds Instruction Manual

Toshiba Dp5018ds Instruction Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Toshiba Dp5018ds Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							  Strata CIX DP5000-series Telephone UG     01/08Strata CIX DP5000-series Telephone UG     01/08
    A
    B
    C
    DE
    F
    G
    H
    I
    J
    K
    L
    M
    N
    L. Speed Dial
    M.  Redial
    N.  Conference/Transfer 
    						
    							Fixed Buttons
    The fixed buttons on the dial pad help perform standard functions quickly and easily.
    Layouts Fixed buttons are laid out differently on the DP5000-series telephones.
    The Fixed buttons are described below.
    Strata CIX DP5000-series Telephone UG     01/08 
    						
    							Strata CIX DP5000-series Telephone UG     01/08Strata CIX DP5000-series Telephone UG     01/08
    Message (Msg): When Msg LED flashes, press      (Msg) to call back 
    the station or voice mail device that activated the LED. This is the  
    telephone’s [PDN] message waiting button.
    Press      (Spdial) and enter 3-digit Speed dial access code. Speed 
    dial access codes must be setup before they can be accessed. See 
    “Speed Dial” on page 60.
    Press         (Redial) to dial the last telephone number called (internal 
    or external).
    If you have Automatic Line Selection, lift the handset first. 
    Microphone    (Mic/Mute) button toggles between Mic and Mute. 
    When Mic key is lit, handsfree communication is supported, when Mic 
    is pressed again and light it off, Mute is enabled on the microphone in 
    the telephone and the microphone in the handset. 
    						
    							Table 3 Fixed Button Definitions 
     Message (Msg): When Msg LED flashes, press 
    Msg to call back the 
    station or voice mail device that activated the LED. This is the tele-
    phone’s [PDN] message waiting button.
    Red LED must be on in order for button to function.
      Microphone (Mic/Mute) button toggles between Mic and Mute. When 
    Mic key is lit, handsfree communication is supported, when Mic is 
    pressed again and light is off, Mute is enabled on the microphone in 
    the telephone and the microphone in the handset. 
     
    Speaker: Press to toggle the speaker ON/OFF. When red Speaker 
    LED is lit handsfree communications is supported. 
    To start a handsfree conversation; press the Speaker button, this turns 
    the red Speaker LED on. To terminate this call press the Speaker but-
    ton again (Speaker LED off).
    During a handset conversation, press the Speaker button to start 
    hands-free communications (red Speaker LED on). Press the Speaker 
    button again to transfer the conversation back to the handset (Speaker 
    LED off). 
     
    Press and release the volume control bar to adjust volume levels. See 
    “Volume Control” on page 11. 
    Continuously holding the volume button (up or down) does not change 
    the volume. It is adjusted on a per press basis.
    Spdial Press 
    Spdial and enter 3-digit Speed dial access code. Speed dial 
    access codes must be setup before they can be accessed. See 
    “Speed Dial” on page 60.
    Redial Press 
    Redial to dial the last telephone number called (internal or 
    external).
    If you have Automatic Line Selection, lift the handset first. Programmable Feature Button  Layout
    03
    04
    05
    06
    07
    08
    09
    10
    11
    12
    14
    15
    16
    17
    18
    19
    20
    13
    Strata CIX DP5000-series Telephone UG     01/08
    Press          (Cnf/Trn) to add internal or external parties to a   
    conference call (up to 8 parties).
    Press          
    (Cnf/Trn) and enter a number to transfer a call to   
    another party (on the CIX system). 
    Press      
    (Hold)  to place an internal or external call on hold.
    Press      
    (Hold)      (Hold)  to place an internal or external call on 
    Exclusive hold. If your telephone is programmed for Automatic Hold, 
    existing calls are automatically placed on hold when you answer a 
    call or make another call. 
    						
    							Table 3 Fixed Button Definitions 
    Cnf/Trn (Conference/
    Transfer)
    Press Cnf/Trn to add internal or external parties to a conference call 
    (up to 8 parties).
    Press 
    Cnf/Trn and enter a number to transfer a call to another party 
    (on the CIX system). 
    Hold Press 
    Hold 
    to place an internal or external call on hold.
    Press 
    Hold Hold  to place an internal or external call on Exclusive 
    hold. If your telephone is programmed for Automatic Hold, existing 
    calls are automatically placed on hold when you answer a call or make 
    another call.
    Strata CIX DP5000-series Telephone UG     01/08Strata CIX DP5000-series Telephone UG     01/08 
    						
    							Strata CIX DP5000-series Telephone UG     01/08 
    						
    							  Strata CIX DP5000-series Telephone UG     01/08
    1. Press    (Spkr). 
    Strata CIX DP5000-series Telephone UG     01/08
    Press the          (Vol) ▲ to increase volume and          (Vol) ▼ to decrease volume   
    during the call. When you hang up, the volume returns to the default setting.
    Press the          (Vol) ▲ to increase volume and          (Vol) ▼ to decrease volume. 
    This volume setting applies to all calls until changed.
    Make sure the telephone is idle and the handset is on-hook. Press the          (Vol) 
    ▲ to increase volume and          (Vol) ▼ to decrease volume. This adjusts volume 
    for your telephone’s ring tone, Hands free Answerback and Speaker Off-hook Call 
    Announce simultaneously. 
    						
    							The Basics
    This chapter reviews the basic operations of the DP5000-series telephones. The 
    instructions apply to all telephone models, except when noted otherwise.
    Customizing Your Telephone
    Volume Control
    Note The Volume Control instructions for the Single Line Telephone are on the next 
    page.
    ‰  To adjust the handset volume
    ‰ Press the 
    Vo l s to increase volume and Vo l t to decrease volume during the call. 
    When you hang up, the volume returns to the default setting.
    ‰  To adjust the speaker volume for internal/external calls and background music
    1. Press 
    Spkr. 
    2.  Press an extension button - you hear dial tone. 
    3.  Press the 
    Vo l s to increase volume and Vo l t to decrease volume. This volume 
    setting applies to all calls until changed.
    ‰  To adjust Ring Tone, Hands free Answerback and Speaker Off-hook Call Announce
    ‰ Make sure the telephone is idle and the handset is on-hook. Press the 
    Vo l s to 
    increase volume and 
    Vo l t to decrease volume. This adjusts volume for your tele-
    phone’s ring tone, Hands free Answerback and Speaker Off-hook Call Announce 
    simultaneously. 
    ‰  To adjust handset Beep Tone
    LCD Contrast
    Available on backlit telephones and backlit add-on module.
    Strata CIX DP5000-series Telephone UG     01/08
    1. Press    (Spkr). 
              (Vol) ▲ or          (Vol) ▼ to reach the desired 
    Press the          (Vol) ▲ to increase volume and          (Vol) ▼ to decrease volume 
    Press the          (Vol) ▲ to increase volume and          (Vol) ▼ to decrease volume 
    during the call. When you hang up, the volume returns to the default setting.
    Press the          (Vol) ▲ to increase volume and          (Vol) ▼ to decrease volume. 
    This volume setting applies to all calls until changed. 
    						
    							Strata CIX DP5000-series Telephone UG     01/08Strata CIX DP5000-series Telephone UG     01/08
    1. Press and hold down the    (Mic) button.
    1. Press      (Hold)+3+6+9 (simultaneously).
    1. Press      (Hold)+3+6+9 (simultaneously).
    Press and release          (Vol) ▲ or          (Vol) ▼ repeatedly. 
    						
    							‰ To adjust the LCD contrast on the backlit telephones
    1. Press and hold down the 
    Mic button.
    2.  Press and release 
    Vo l s or Vo l t repeatedly.
    Note  Holding the Vol button does not continue to change the setting. The button 
    must be pressed for each step of contrast change.
    ‰  To adjust the LCD contrast on the Add-on Module
    1. Press 
    Hold+3+6+9 (simultaneously).
    2.  Press 
    Contrast + button to increase contrast.
    3.  Press 
    Contrast - button to decrease contrast.
    4.  Lift the handset off-hook / on-hook to save settings.
    Note  Holding the softkey does not continue to change the setting. The softkey must 
    be pressed for each step of contrast change
    Brightness Control
    Available on backlit telephones and backlit add-on module.
    ‰  To change the LCD back light brightness
    1. Press 
    Hold+3+6+9 (simultaneously).
    2.  Press 
    Bright softkey to increase brightness. 
    3.  Press 
    Dim softkey to decrease brightness.
    4.  Lift the handset off-hook / on-hook to save the settings.
    Note  Use the 
    Bright and Dim buttons in steps 2 and 3 on the 10 button LCD Add-
    on Module.
    Strata CIX DP5000-series Telephone UG     01/08
    1.  Press      (Hold)+3+6+9 (simultaneously).
    2. Press the     (Mic) button.
    4. Press       (Hold) to save settings. 
    						
    All Toshiba manuals Comments (0)

    Related Manuals for Toshiba Dp5018ds Instruction Manual