Toshiba Dp5018ds Instruction Manual

Strata CIX DP5000-series Telephone UG     01/08 

Do Not Disturb
If your station is in Do Not Disturb (DND) mode, internal, external and transferred 
calls do not ring your station and Off-hook Call Announce calls are denied. You can 
continue to make calls while in the DND mode. When originating a call in DND 
mode, you will hear a short burst of interrupted dial tone followed by continuous 
dial tone. You can start dialing at any time during either tone.
If you put your Primary extension into DND mode, all calls to that telephone are 
rejected. If...

Setting DND for Another Extension
‰	 To	activate	 DND	for	another 	extension
‰  Enter 
#6191 (hear Entry Tone) + the Primary extension of the remote extension 
+ the pass code + 
# (hear Success Tone). This sets DND as if activated by the 
Primary extension on the target telephone.
‰  To deactivate DND for another extension
‰ Enter 
#6192 (hear Entry Tone) + the Primary extension of the remote extension 
+ the pass code + 
# (hear Success Tone). This removes DND from the target tele-
phone.
‰  To change...

Door Phone(s)
Door phones can be used to call phones selected in system programming. When a 
door phone calls, you hear a distinctive ringing tone, one or five times (set in system 
programming). You can also call a door phone and monitor the surrounding area.
LCD telephones display the door phone name ID when calls are made to or from 
door phones. 
The number of possible door phones varies by Strata CIX system, 01~24 maximum 
for larger systems. Check with your System Administrator to find out the...

‰	 To	call/monitor 	a	 door 	phone
1.  With the handset off-hook, press an extension button. You hear dial tone and the 
LED flashes green (in-use).
2.  Press 
#15 (hear three tone bursts), then enter the door phone number (01~24, 
depending on system size). A two-way talk-path exists between your telephone 
and the door phone. The door phone will not ring. You can audibly monitor the 
area around the door phone.
‰  To call from a door phone
1. Press the door phone button and then release it. You hear a...

Emergency Ringdown
If a station remains off-hook for a programmable period, it can be automatically 
treated as an Emergency Call and directed to an emergency destination. The station 
may have partially dialed a number or have dialed no digits at all. Each station is 
programmed with its specific emergency ringdown destination.
A station number or a group pilot number can be specified as an emergency ring-
down destination. In a private network, the station or pilot number must be in the 
same network...

Message Waiting
Message Waiting is shown on the Msg button which will flash red when there are 
messages waiting. The waiting message indicators can come from the voicemail sys-
tem or they can be internal messages sent from other extensions. 
The messages from other extensions are notifications that someone has called your 
extension and wants you to call them back.
An extension can receive up to three Message Waiting indications, one additional 
indicator will always be reserved for the voicemail...

Table 9 Feature Access Codes 
Station
#66 + nnn + Phone No. + 
# 
System
1#66 + nnn + Phone No. 2
 + # 
Table 10  Phone Number Dial String CharactersStrata CIX DP5000-series Telephone UG     01/08 

Turning On/Off MW LED on Another Extension
When an extension is called, the calling party can choose to send a message to the 
called party. This is a notification to say that a call has been missed and the calling 
party would like to be called back.
By sending a message to another extension you turn on their Msg LED.
1. Dial an internal extension. You may hear ringing or busy tone.
2.  Press 
Msg or 7. The Msg LED flashes red on the called telephone. At your tele-
phone, the Msg LED lights steady red...

Method 11. Press 
#64 plus the extension number that has the message light set.
2.  Press 
Spkr or hang up to end the call.
Method 2 1. Dial the extension that has the Message LED on.
2.  Press 
77
3. Press Spkr or hang up to release your telephone.
Strata CIX DP5000-series Telephone UG     01/08
6. Press      Spdial. The 
Speed Dial name is now 
programmed.