Toshiba Dp5018ds Instruction Manual

Microphone Cut-Off
This feature prevents callers from monitoring the sounds near your telephone when 
your telephone receives a Handsfree Call or cuts-off the telephone microphone while 
on a speakerphone call. When the feature is ON, the 
Microphn Cut-off LED lights 
steady red and the Mic and Spkr LEDs do not light when your telephone is called. 
When the feature is OFF, the 
Microphn Cut-off LED is not lit and your micro-
phone works. The 
Microphn Cut-off functions on Handsfree Answerback and...

Off-hook Call Announce
Off-hook Call Announce (OCA) enables you to complete a call to a busy digital tele-
phone. Your telephone must be programmed to either announce automatically or to 
announce after you press a button on your dial pad. The destination telephone must 
be programmed to accept an OCA. The announcement may be delivered over the 
handset or the speaker.
Handset OCA can operate on any digital telephone. Speaker OCA requires the addi-
tion of a special circuit board inside the...

Override Calls
The available override features are:
•	 Busy	Override
•	 Do	 Not	Disturb	 Override
•	 Executive	 Override
•	 Destination	 Restriction/Traveling	 Class	Override
•	 Class	 of	Service	 Override
•	 Privacy	 Override
Busy Override
Ring Over Busy Override enables you to send a muted ring tone to a busy station to 
indicate a call is waiting. The Busy Override (BOV) muted ring can be programmed 
for each station to be two muted rings only or continued muted rings until the call is 
answered. This...

#6061Login - from Agent Station
#6062Logout - from Agent Station
#6161 + DN + #Login - Agent Station (DN) from another station
#6162 + DN + #Logout – Agent Station (DN) from another station
where DN = the Directory number of the agent station.
Strata CIX DP5000-series Telephone UG     01/08 

  
Executive Override
Executive Override enables you to enter an established conversation. Your telephone 
can also be programmed to block Executive Override from other telephones.
‰  To perform Executive Override
‰ After reaching a busy station, press 
3
...or, if you have an LCD telephone, use the OVRD Soft Key. 
You enter a conference with the busy station and the party to whom he was talk-
ing. The called parties may hear an optional tone signal prior to your entering the 
conversation. 
Your LCD...

  
Note For security reasons, the override codes are only available on a selected basis. 
See your System Administrator.
Privacy Override
This feature enables you to enter an established call on a line you share with another 
telephone. Up to two station users can enter an existing Central Office (CO) line-
to-station call (i.e., up to three stations can be connected to a CO line). You can 
also use this feature if the station that is already connected to the CO line is in the 
Privacy Release mode....

All Call Page
You can make an All Call Page to telephones assigned to the “All Call Page Group.” 
Stations are assigned to the “All Call Page Group” in system programming.
‰  To make an All Call Page
1. With the handset off-hook, press 
All Call Page
...or dial #30. This pages all telephones in the All Call Page Group but, depend-
ing on system programming, you may or may not page external speakers.
2.  Make your announcement then hang up.
‰  To answer an All Call Page
1. Lift the handset off-hook, dial...

Privacy
Privacy controls the ability of more than one person to use the same extension or 
CO line at the same time. Privacy applies to multiple appearances of extensions, 
Phantom extensions, outside Lines and outside Line Group buttons. The application 
of Privacy to individual telephones is controlled in system programming.
By default, the system is private. If you are in a conversation, another telephone with 
an appearance of the line on which you are talking cannot intrude unless that tele-
phone...

Speed Dial
Speed Dial (SD) enables you to dial a sequence of up to 32 digits with a shorter 
code. Dial sequences can include telephone numbers, authorization codes, passwords 
feature activation codes and pauses. Speed Dial may be used to originate a call or 
invoked after a call is established. There are two types of Speed Dial: 
•	 System SD	– All telephones in your system can share a list of up to 800 System 
Speed Dial numbers under the exclusive control of the System Administrator. In 
some cases,...

Storing a System/Station Speed Dial Number 
1. Dial #66. The display shows “SPEED DIAL” and you hear Entry Tone.
2.  Dial the Station Speed Dial number (100~199) or System Speed Dial number 
(200~999). The LCD shows your digits and you hear Entry Tone.
3.  Dial the telephone number to be stored + 
#. Include any required access and area 
codes. The LCD shows “SPEED DIAL” + the Speed Dial Number + destination 
+ #. You hear Success Tone.
4.  Lift handset.
5.  To enter another number repeat steps 1-4....