Toshiba Dp5018ds Instruction Manual

Storing Personal Speed Dial Names
You can store names with Personal Speed Dial numbers. These names will display as 
Soft Keys, that can be used for dialing from the telephone LCD directories.
•	 Speed	Dial	locations	 must	be	assigned	 to	your	 telephone	 by	your	 System	
Administrator before you can store names. Your System Administrator can also 
associate names with Station Speed Dial numbers.
•	 Only	 the	Administrator	 telephone	can	store	 System	 Speed	Dial	numbers.
‰  To assign Station Speed Dial...

Tone First / Voice First Signalling
To determine the signalling on the telephone circuit.
Tone First Signalling
When the telephone rings and the called party must press Spkr or lift the handset in 
order to receive the call. 
Voice First Signalling
The telephone does not ring when it is being called, rather a long tone is heard, fol-
lowed by the caller\qs voice coming through the speaker. This method automatically 
starts in a hands free mode and allows both parties to speak with each other.
Note The...

  
Tone/Pulse Dialing
With some older Central Offices, you may have to make calls on outside lines pro-
grammed for rotary dial pulses. This feature enables you, while on these lines, to 
switch to tone dial to access remote equipment (such as an answering machine) 
requiring touchtones.
Note With ISDN calls, when 
Tone Dial Select is pressed, all of the digits 
entered after that point will be sent with touchtones. 
‰  To change Tone Dialing
1. Access an outside line.
2.  Dial a telephone number.
3....

Uniform Call Distribution
Uniform Call Distribution (UCD) provides ACD-like service based on the simplified 
Distributed Hunt feature. Incoming calls are answered by Voice Mail as the Auto 
Attendant function or they can be directly routed to the UCD (Distributed Hunt) 
Pilot number. The caller will dial the UCD Pilot station in response to a prompt. The 
call will go to the next agent or, if all agents are busy, the call will camp-on to the 
Distributed Hunt pilot and ring-back tone or Music-on-Hold...

Login/Logout
Login and Logout is controlled by the Login key assigned to the agent phone (see 
Strata CIX Programming Manual, Volume 1 for details). The Log status is displayed 
on the Login key as shown below
•	 Login - Key is On Steady
•	 Logout - Key is Off
The Login/Logout feature is applied to the call which terminates to UCD pilot only. 
Therefore, the call can terminate to agent Prime or Phantom PDN directly even if the 
agent is in Logout state. Also, Login/Logout can be activated by an access...

4ADM/DSS Console
This chapter provides an overview of the optional units that can be connected to the 
DP5000-series telephones (except the Single line telephone).
Add-on Modules
The following Add-on modules provide additional buttons:
•	 10	Button	 LCD	Module,	 up	to	two	 supported	 per	telephone.
•	 20	 Button	 Add	on	Module	 with	paper	 keystrip,	 up	to	two	 supported	 per	tele-
phone.
•	 Digital	 Direct	Station	 Selection	 (DSS)	Module	 with	60	buttons	 and	Paper	
Keystrip, up to three supported per...

ADM
Buttons and LEDs
The 10 button LED add on module and the 20 button keystrip add on module have 
programmable feature buttons that can be assigned as CO Line, Directory Number, 
DSS, One Touch Speed Dial or any other programmable feature. 
When a Programmable Feature Button is programmed as a DSS button or a Line 
button, it will have an LED that provides a status of the outside line or station 
assigned to it. The DSS button acts like a speed dial button to a specific extension.
•	 A	station	 or	line...

Adding an ADM
For installation instructions, please refer to the Strata CIX Installation & 
Maintenance. Please read the caution, if you are connecting the ADM with the tele-
phone or moving the telephone with the ADM.
CAUTION! Unplug the line cord from the DP5000-series telephone before 
attaching the ADM. Plugging the ADM cable in while the DP5000-
series telephone is powered will damage or impair the functionality 
of the telephone, ADM or both.
Brightness Control
‰ To change the Brightness Control...

  
 
Side Tone Level
Max. (louder)
 
OFFON
Min. (softer)
 OFF OFF
Strata CIX DP5000-series Telephone UG     01/08 

DSS Console
The 60 button Direction Station Selection (DSS) Console operates operates along-
side a digital telephone to provide 60 (up to 180) additional buttons (shown right). 
The 60 programmable feature buttons can be assigned as CO line, extension, DSS, 
One Touch Speed Dial or any other flexible feature. 
The DDM5060 console uses dual red and green LEDs to show call and feature sta-
tus.
DSS Buttons
DSS buttons can appear on both the ADM and DSS Console. Each DSS button is 
associated with a...