Toshiba Dp5018ds Instruction Manual

‰ To transfer a call to an idle station
1. Press the DSS button corresponding to the station to be called.
The call is placed automatically on hold. The Line or extension LED flashes 
green at double the on-hold rate, and the DSS LED flashes green. You hear a sin-
gle ring tone. (If using the Tone signaling mode, you hear successive ring tones.)
2.  Announce the call. 
With Tone signaling, you would have to wait for the called station to answer 
before announcing the call.
3.  Hang up.
Feature Code...

The call rings the called station when you hang up. While the called station is 
ringing, the DSS LED is steady red, and the Line LED flashes green at the on-
hold rate or if on a extension button, it goes idle. 
When the called station answers the call, the DSS LED stays steady red, and the 
Line LED becomes steady red.
4.  If the station does not answer before a period set in system programming, the call 
recalls your station.
Strata CIX DP5000-series Telephone UG     01/08 

Call Transfer with Camp-on
You can transfer a call to a busy station from either a DSS console or an ADM. Use 
the DSS to transfer the call, even though the DSS LED associated with the station 
you are “transferring to” is red.
‰  To transfer call to a busy station
1. Press DSS corresponding to the busy station to be called.
You may hear a busy tone. The original caller is placed automatically on hold. 
The Line or extension LED flashes green at double the on-hold rate, and the DSS 
LED remains steady...

If the call is not answered after a specified Recall time set in system program-
ming, camp-on is cancelled and the transferred call rings back.
Call Answering (Outside Line)
If your ADM or DSS console is equipped with a Line button, you can answer out-
side line calls from the ADM or DSS console as you would from a digital telephone.
‰  To answer an incoming outside line call to a ADM or DSS Console, press the 
flashing 
Line.
Speed Dial
Your ADM or DSS console may be equipped with SD (Speed Dial)...

Table 14 Feature Access Codes 
Feature Feature Access Code Sequences
Account Code (while on a call)
Cnf/Trn + #46, dial account code digits
Attendant ConsoleExt. button + 0
Automatic Busy Redial - On Cnf/Trn
 + #441, hang up
Automatic Busy Redial - OffExt. button + #442
Automatic Callback (while on a call) 4
 when you hear busy tone
Automatic Callback CancelExt. button + #431
Background Music
 
Telephone Speaker OnExt. button + #490 + music source no. (1~15) + # 
Telephone Speaker OffExt. button + #491 +...

Paging
Table 14 Feature Access Codes 
Feature Feature Access Code Sequences
Remote Pickup (pickup another exten-
sion)Ext. button + #5#72 + Primary Ext. No.
Pickup an Outside Line on HoldExt. button + #5#73 + Outside Line on hold (001~128)
Pickup a an on HoldExt. button + #5#74 + Ext. No. on hold
Conferencing - Three Way #494
Dial 441
Simulate Dialing #
Dial 440
DISA Security Code - Change
Ext. button + #658  + old Security Code (1~15 digits)  + # 
+ new Security Code (1~15 digits)  + 
#
Local - On
Ext....

You can make an announcement page to a group of telephone speakers selected in 
system programming with 
All Call Page on the DSS console. SD (if programmed) 
on either the DSS console or the ADM can be used for page announcements. See 
“All Call Page” on page 58.
Call Forward Override (DSS Override)
Either the DSS buttons on your DSS console or the associated telephone can be set 
in system programming to ring stations that are in the Call Forward mode, instead of 
being forwarded. Usually the console’s...

‰ To override call forward with the console’s associated telephone
1. Press 
Cnf/Trn or extension button.
2.  Dial the station number set for call forward.
Make the call as you would from any other station. This procedure assumes your 
station has a typical program setting.
Table 14  Feature Access Codes 
Feature Feature Access Code Sequences
Station #66 + nnn + Phone No. + # 
nnn = 100~199 SD bin numbers
System
2
#66 + nnn + Phone No.3
 +  # 
nnn = 200~999 SD bin numbers
Station 2
Spdial + nnn 
nnn =...

  
‰ To override call forward with your DSS Console
‰ Press the station DSS button set for Call Forward.
Night Transfer Button
This button enables a pre-programmed station to place the system into Day, Day2 or 
Night Mode. See your System Administrator for information on the settings for Day, 
Day2 or Night Mode. These modes will transfer calls to a designated location or 
voice mailbox, depending on programming.
1. Press 
Night Transfer.
2.  Press the desired Mode number:
•	 Press	
1 for Day Mode (LED...

This page is intentionally left blank.
Strata CIX DP5000-series Telephone UG     01/08
1. Press Mode soft key.
2.  Press 
ADMN soft key. The “Password” prompt appears.   
Enter the password (0000 – default).
3.  Press      
(Hold).
Follow the steps below to perform the following Administrator functions in 
Administrator Mode.
Phone Name
1.  Enter Administrator Mode
2.  Press      
(Hold).
3.  Enter the DN ID number. This is the extension number (PDN) of the telephone.
4.  Enter the Phone Name that...