Toshiba Dp5018ds Instruction Manual

  
LED Indicator Details
Each line and Programmable Feature Button has a LED next to it which indicates 
the status of the line or feature associated with the button. Line LEDs light red or 
green and flash at varying rates to indicate call status (see Table 6).
Note  LEDs on the telephone flash at different speeds depending on the function 
performed. Flash rates can be found under  “LED Indicator Details” on page 
24.
Table 6  LED Indicators 
LED
Internal Call 
(while station ringing) Your extension...

  
1) 911
2)
_______ 3)_______
Strata CIX DP5000-series Telephone UG     01/0826 

3Feature Operations
This chapter gives you more details about your DP5000-series telephone’s advanced 
functions. An alphabetical list of supported features has been compiled in this chap-
ter for fast and easy reference.
Account Code Calls
Account Codes (Forced or Voluntary) can be used for a variety of reasons includ-
ing billing, tracking, and line restriction applications. Account Codes are assigned 
in the system as a fixed length (default is six digits) and are recorded by the system, 
along with...

Forced Account Codes
Some applications require you to enter an Account Code. These Forced Account 
Codes may be verified or non-verified, depending upon the application, but in either 
case, the caller must enter a code before proceeding.
‰  To dial using Forced Account Codes
1. Place a call in the normal method.
If the call requires an Account Code, a burst of tone (Success Tone) is heard after 
dialing the telephone number alerting you to enter the Account Code. 
2.  Enter the account number. 
When the...

Voluntary Account Codes (Verified/Non-Verified)
Voluntary Account Codes are optional. They can be entered during a call and are 
used for tracking selected calls using Station Message Detail Report (SMDR) call 
detail recording option.
If the system is set for Verified Account Codes, station users must enter a specific 
code when entering the Voluntary Account Code(s) or the code is not validated for 
the SMDR call report. This does not affect the call.
There are two ways to dial using a Voluntary...

Advisory Messages
Advisory messaging enables you to store an informative message for LCD tele-
phones that call your telephone. The messages can be up to 16 characters long. The 
Strata system provides a number of predefined
 messages, shown in the table below. 
Message numbers 5~9 can be defined by your System Administrator.
‰  To set an advisory message
1. Go off-hook or press your extension button to hear dial tone.
2.  Press 
#411
3. Enter Message number (see table above)
4.  Enter additional digits...

Alarm Notification Button
The Alarm Notification Button must be setup by your System Administrator on your 
station.
‰	 When	 the	Alarm	 Notification	 button	displays
‰  Call your System Administrator.
This button stops displaying when the alarm clears or when you press the flashing 
button. If the alarm has not been cleared the Alarm Notification Button starts flash-
ing every 10 minutes.
Automatic Busy Redial 
After reaching a busy outside number, you can activate Automatic Busy Redial so 
that the...

Strata CIX DP5000-series Telephone UG     01/08 

Automatic Callback
When you reach a busy station, you can set Automatic Callback to have the system 
monitor the busy extension and notify you when it becomes idle. 
Automatic Callback can place you in queue for an available outside line, if you 
reach a line group in which all lines are busy. When a station or line becomes avail-
able, the system rings your telephone; when you answer the system automatically 
rings the intended destination. The amount of time the system will wait for an idle...

Strata CIX DP5000-series Telephone UG     01/08