Toshiba Dp5018ds Instruction Manual

  Strata CIX DP5000-series Telephone UG     01/08Strata CIX DP5000-series Telephone UG     01/08
A
B
C
DE
F
G
H
I
J
K
L
M
N
L. Speed Dial
M.  Redial
N.  Conference/Transfer 

Fixed Buttons
The fixed buttons on the dial pad help perform standard functions quickly and easily.
Layouts Fixed buttons are laid out differently on the DP5000-series telephones.
The Fixed buttons are described below.
Strata CIX DP5000-series Telephone UG     01/08 

Strata CIX DP5000-series Telephone UG     01/08Strata CIX DP5000-series Telephone UG     01/08
Message (Msg): When Msg LED flashes, press      (Msg) to call back 
the station or voice mail device that activated the LED. This is the  
telephone’s [PDN] message waiting button.
Press      (Spdial) and enter 3-digit Speed dial access code. Speed 
dial access codes must be setup before they can be accessed. See 
“Speed Dial” on page 60.
Press         (Redial) to dial the last telephone number called (internal...

Table 3 Fixed Button Definitions 
 Message (Msg): When Msg LED flashes, press 
Msg to call back the 
station or voice mail device that activated the LED. This is the tele-
phone’s [PDN] message waiting button.
Red LED must be on in order for button to function.
  Microphone (Mic/Mute) button toggles between Mic and Mute. When 
Mic key is lit, handsfree communication is supported, when Mic is 
pressed again and light is off, Mute is enabled on the microphone in 
the telephone and the microphone in the...

Table 3 Fixed Button Definitions 
Cnf/Trn (Conference/
Transfer)
Press Cnf/Trn to add internal or external parties to a conference call 
(up to 8 parties).
Press 
Cnf/Trn and enter a number to transfer a call to another party 
(on the CIX system). 
Hold Press 
Hold 
to place an internal or external call on hold.
Press 
Hold Hold  to place an internal or external call on Exclusive 
hold. If your telephone is programmed for Automatic Hold, existing 
calls are automatically placed on hold when you answer a...

Strata CIX DP5000-series Telephone UG     01/08 

  Strata CIX DP5000-series Telephone UG     01/08
1. Press    (Spkr). 
Strata CIX DP5000-series Telephone UG     01/08
Press the          (Vol) ▲ to increase volume and          (Vol) ▼ to decrease volume   
during the call. When you hang up, the volume returns to the default setting.
Press the          (Vol) ▲ to increase volume and          (Vol) ▼ to decrease volume. 
This volume setting applies to all calls until changed.
Make sure the telephone is idle and the handset is on-hook. Press the...

The Basics
This chapter reviews the basic operations of the DP5000-series telephones. The 
instructions apply to all telephone models, except when noted otherwise.
Customizing Your Telephone
Volume Control
Note The Volume Control instructions for the Single Line Telephone are on the next 
page.
‰  To adjust the handset volume
‰ Press the 
Vo l s to increase volume and Vo l t to decrease volume during the call. 
When you hang up, the volume returns to the default setting.
‰  To adjust the speaker volume...

Strata CIX DP5000-series Telephone UG     01/08Strata CIX DP5000-series Telephone UG     01/08
1. Press and hold down the    (Mic) button.
1. Press      (Hold)+3+6+9 (simultaneously).
1. Press      (Hold)+3+6+9 (simultaneously).
Press and release          (Vol) ▲ or          (Vol) ▼ repeatedly. 

‰ To adjust the LCD contrast on the backlit telephones
1. Press and hold down the 
Mic button.
2.  Press and release 
Vo l s or Vo l t repeatedly.
Note  Holding the Vol button does not continue to change the setting. The button 
must be pressed for each step of contrast change.
‰  To adjust the LCD contrast on the Add-on Module
1. Press 
Hold+3+6+9 (simultaneously).
2.  Press 
Contrast + button to increase contrast.
3.  Press 
Contrast - button to decrease contrast.
4.  Lift the handset off-hook /...