Timex Rugged Field and Trail Series Chronograph User Manual

							W223 EU2 2220\b5001402 
						

							                  \U      English    pa\be 2
              Franç\Uais    pa\be 54
         \federlands\U    pa\bina 112
                It\Ualiano    pa\bina 166 
						

							TIMEX®WATCHES
Congratulations on purchasing your TIMEX®watch. Please read these instructions carefully to
 understand how to operate your Timex timepiece.
Your watch may not have all of the features
described in this booklet.
For more information, please visit: Timex.com 
						

							          TABLE OF CONTENTS      2      How to Start Your Watch
      3      Water and Shock Resistance
      \b      Indiglo
®NightLight
      5      Analog\fDigital Models
    1\f      MultiFunction Models
    20      Day\fDate\fAM\fPM\fSun\fMoon Models
    22      Chronograph Models
    39      Elapsed Time Ring
    \b0      Tachymeter Ring
    \b1      Compass Ring
    \b2      How to Adjust Bracelet
    \b\b      Bracelet Link Removal
    \b5      Battery
    \b6      Warranty
E N G L I S H 
						

							WATER AND SHOCK RESISTANCEIf your watch is waterresistant, meter marking
(WR_M) is indicated.
*pounds per square inch absolute
WARNING: TO MAINTAIN WATERRESISTANCE,
DO NOT PRESS ANY BUTTONS OR PULL OUT 
THE CROWN UNDER WATER UNLESS YOUR
WATCH IS INDICATED AS 200 METER WATER
RESISTANT.
1.   Watch is waterresistant only as long as crystal, crown and case remain intact.
3
E N G L I S H
HOW TO START YOUR WATCHTo start your watch remove the plastic guard from
under the crown, then press the crown in against the
case. The second hand will begin advancing in one
second intervals.
Some deepdepth waterresistant watches require
the setting crown to be screwed in to secure water
resistance. If your watch case has a protrusion with
screw threads, the crown must be screwed in after
setting the watch.
To screw in, push the crown firmly against the
threaded protrusion and hold in while turning the
crown clockwise. Continue to screw in the crown
until it is tight. You will need to unscrew the crown
(counterclockwise) before pulling it out the next time
you want to set your watch. 
2
E N G L I S H
\baterResistance Depthp.s.i.a. * \bater pressure Below Sur\face
30\f/98ft\b0
50\f/1\b4ft8\b
100\f/328ft1\b0
200\f/\b5\bft284 
						

							ANALOG\bDIGITAL MODELS
4PUSHER ANALOG\bDIGITAL MODEL WITH
INDIGLO®NIGHTLIGHT & NIGHTMODE®FEATURE
5
E N G L I S H
2.   Watch is not a diver watch and should not beused for diving.
3.   Rinse watch with fresh water after exposure to salt water.
4.   Shockresistance will be indicated on the watch face or caseback. Watches are designed to pass
ISO test for shockresistance. However, care
should be taken to avoid damaging the crystal.
INDIGLO®NIGHTLIGHTPress button or crown to activate light. Patented 
(U.S. pat. 4, 527,096 and 4,775,964) electrolumines
cent technology used in the INDIGLO
®nightlight
 illuminates entire watch face at night and in low light
conditions.
\b
E N G L I S H
“B”  PUSHER 
“C” 
C R O W  N  
POSITION 
PUSHER  “D” A  
B 
PUSHER 
“B” 
PUSHER  “ A  ”   PUSHER 
“C” 
C R O W  N  
POSITION 
PUSHER  “D”  A  B 
PUSHER 
PUSHER  “A”  
						

							DIGITAL DISPLAY1)   The Digital display changes to each function everytime you PRESS pusher “A”. (As illustrated below):
     TIME \f CALENDAR
     DAILY ALARM
     COUNTDOWN TIMER
     CHRONOGRAPH
     DUAL TIME
7
E N G L I S H
TO USE INDIGLO®NIGHTLIGHT1)   PRESS pusher “B” to illuminate the entire dial (Both analog and digital).
TO USE NIGHTMODE®FEATURE1)   PRESS and HOLD pusher “B” for 3 seconds untilyou hear a beep.
2)   Pressing any pusher will cause the INDIGLO
®nightlight to illuminate and stay on for 3 seconds. 
3)   NIGHTMODE®feature will last for 3 hours.
4)   To deactivate NIGHTMODE®feature PRESS and
HOLD pusher “B” for 3 seconds.
ANALOG TIME 
TO SET ANALOG TIME
1)   PULL the crown out to the “B” position.
2)   TURN the crown either way to the correct time.
3)   PUSH in the crown to the “A” position. 
6
E N G L I S H
START  
Press and release MODE 
button once.      
  
DUAL  TIME  CHRONOGRAPH 
  
 COUNTDOW N 
TIME/ 
CALENDAR  DAILY 
ALARM  TIMER 
CALENDAR 
HOUR MINUTE SECOND MONTH DATE  DAY 
 Press and release MODE 
button once.  Press and release MODE 
button once. 
  
						

							•    To view or change the display to TIME, repeat the
steps above.
     NOTE: “A” or “P” will appear when the 12Hour
format is selected.
•     Set this time to coordinate with the Analog time
or another time zone.
•     PRESS and HOLD pusher “C” for 2 seconds in 
setting mode, to activate fast advance.
9
E N G L I S H
TO SET TIME \b CALENDAR1)   PRESS pusher “A” to bring up TIME \f CALENDAR display.
2)   PRESS and HOLD pusher “D”. HOLD will display until second flashes.
3)   PRESS pusher “C” to reset to second to “00”.
4)   PRESS pusher “A” to let hour flash.
5)   PRESS pusher “C” to advance hour.
6)   PRESS pusher “A” and “C” as above to adjust tens of minutes, minute, year, month, date, day and 
12\f24 hour format.
7)   PRESS pusher “D” to complete setting.
8)   View or select the TIME or CALENDAR to appear in your digital display.
•     PRESS pusher “C” to view the CALENDAR for 2
seconds.
•     PRESS and HOLD pusher “C” for 3 seconds until
the watch beeps to change the display to 
CALENDAR.
\f
E N G L I S H 
						

							     NOTE:
•     When the alarm sounds, it will beep for 20 
seconds.
•     To stop the alarm beep, PRESS any pusher.
•     PRESS and HOLD pusher “C” for 2 seconds in
setting mode, to activate fast advance.
11
E N G L I S H
TO SET DAILY ALARM1)   PRESS pusher “A” to bring up DAILY ALARM dis play: “ALARM” will appear for 3 seconds followed
by the current alarm setting time and time zone.
The ALARM mode symbol “AL” and the applicable
time zone symbol “T1” or “T2” alternate to give
complete information.
2)   PRESS pusher “D” to let time zone flash.
3)   PRESS pusher “C” to select time zone.
4)   PRESS pusher “A” to let hour flash.
5)   PRESS pusher “C” to advance hour.
6)   PRESS pusher “A” and “C” as above to adjust tens of minutes and minute.
7)   PRESS pusher “D” to complete setting.
8)   Alarm is automatically activated after setting Sis displayed. 
10
E N G L I S H
FOLLOWED BY
THE CURRENT
ALARM SETTING
TIME AND TIME
ZONE.
WILL
APPEAR
FOR 3
SECONDS 
						

							TO USE COUNTDOWN TIMER
1) PRESS pusher “A” to bring up COUNTDOWN TIMERdisplay. “24 HR TR” will appear.
2) PRESS pusher “D” to let hour flash.
3) PRESS pusher “C” to advance hour.
4) PRESS pusher “A” to set tens of minutes.
5) PRESS pusher “C” to advance tens of minutes.
6) PRESS pusher “A” and “C” as above to adjust minute.
7) PRESS pusher “D” to complete setting.
8) PRESS pusher “C” to start the timer.
9) PRESS pusher “D” to stop the timer.
10) PRESS pusher “D” again to resume timer to the preset time.
13
E N G L I S H
TO SET DAILY ALARM OR CHIME ON\bOFF1)   PRESS pusher “A” to bring up DAILY ALARM display. 
2)   PRESS pusher “C” to activate or deactivate daily alarm and chime accordingly.
     NOTE: 
•     aor  Cwill appear or disappear according to daily
alarm activation or deactivation. 
•     Nor  Bwill appear or disappear according to
chime activation or deactivation.
•     The alarm coordinates with the digital time not
analog time.
•     The alarm will sound only if the digital time zone
(T1 or T2) selected in the Alarm set mode is 
currently displayed, as confirmed by the alarm
symbol  aor  C.
12
E N G L I S H
SETTING MODE
HOUR MINUTE