Timex 20122015 Ironman 150Lap Sleek User Manual

							• If you are experiencing TAP activations inadvertently, move your tapforce to the next level.
• If you are in a triathlon transition or just changing clothes, we recom- mend you press MODE to switch to the TIME mode to avoid tap activa-
tion of the chronograph which will continue running in the background.
Return to CHRONO when you are finished.
SETTING MODES & FUNCTIONS
Time / Date / Hourly Chime
1. Press MODE until Time of Day appears.
2. Press and hold SET to start. 
3. Press MODE (NEXT) to advance to the setting options. 
4. Press START/SPLIT (+) or STOP/RESET (-) to increase or decrease  values for Time zone (1 or 2), time, month, day, date, year, 12/24 hr
 format, date format, hourly chime, button beep and Tap force. 
TAPSCREEN™TECHNOLOGY
Preserve momentum and avoid breaking your stride. The TapScreen™Technology works with one firm tap on the watch face. TapScreen™Technology is used for CHRONO, TIMER and INTERVAL TIMER modes. 
The tap sensitivity can be adjusted to light (LITE), medium (MED) or hard
(HARD). The watch comes with a medium default setting.
1. In TIME Mode press and hold the SET button. 
2. Press the MODE (NEXT) button until TAP FORCEappears.
3. Press START/SPLIT (+) or STOP/RESET (-) to select LITE, MED or HARD for the tap force. 
Tips:• We recommend you select your TAP FORCE depending on the activityyou are performing: Walking (LITE), Running (MED), Biking (HARD) and
Swimming (HARD). 
17
16
E
W254_TAP_Booklet_EN_Layout 1  9/18/09  1:58 PM  Page 16 
						

							Chronograph 
The chronograph will time your workout session. During your event,
recording laps/splits will give you real-time feedback to pace yourself and
allow you to adjust your speed to meet your overall time goal.
Lap/Split
Lap is the time to complete an individual segment of your workout. Split
is the cumulative time from the beginning to that specific point in your
workout. Below is an example of a 4-mile run. The runner records
laps/splits every mile.
Lap/Split chart
This watch records up to 100 hours and counts up to 199 laps. It stores
the most recent 150 laps in Recall Mode.
5. Press NEXT to set the other time zone (if desired), following the above
procedure.
6. Press SET (DONE) to exit.
Tips:• If you are in other modes, press and hold MODE to peek at time of day, release to return to current mode.
• The date format can be selected as month-date (MM:DD, MMM-DD), month-day-year (MM-DD-YY), day-month-year (DD.MM.YY) or 
year-month-date   (YY-MM-DD).
Second time zone
Your watch has two time zones that are useful when you are travelling to
a place with a different time zone or when you are switching to daylight
savings time. 
Tips:
• You can easily switch from TIME 1 to TIME 2 and vice versa by press- ing and holding the START/SPLIT button for 8 seconds.
19
18
E
W254_TAP_Booklet_EN_Layout 1  9/18/09  1:58 PM  Page 18 
						

							• If your target time is ON, you will hear an alarm that will relate to yourpace to help you assess if you need to accelerate or decrease your
pace. The display will provide your delta time and pace feedback
(SLOW, ON PACE or FAST). The delta time is the difference between
 target lap time and real lap time. Go to the target time pacer setting
section to activate this feature. 
4. Press STOP/RESET to pause or finish. Tap your screen to resume.
5. When workout is complete press and hold STOP/RESET to clear the display (CHRONO resets to 00.00.00). The workout is now automati-
cally saved and it can be viewed in RECALL Mode.
Tips:• You can also use the START/SPLIT button to start your chrono and takelaps. 
• If you want to view the time of day, press and hold MODE, release to return to current CHRONO. 
21
E
Operating the Chrono 
1. Press Mode until CHRONOGRAPH appears. (Make sure it reads 00.00.00 or press STOP/RESET to reset.) 
2. TAP your screen to START.
3. TAP your screen every time you need to log a LAP/SPLIT. 
• Every time you take a lap your display will freeze for 10 seconds to enable you to review your LAP/SPLIT data, while your chronograph is
recording the next lap/split.
20
W254_TAP_Booklet_EN_Layout 1  9/18/09  1:58 PM  Page 20 
						

							23
E4. Press SET (DONE) to exit or press MODE (NEXT) to set up the TargetTime feature (described later in this section).
Note: Selecting TOTAL RUN format allows you to view total elapsed time since
you started the CHRONO, including any time elapsed while the Chrono
was stopped. When a lap/split is taken the watch automatically switches
to LAP/SPLIT format. 
Target Time Pacer
Because pace is important to achieve your goals, a built-in audible track-
er indicates whether your target lap times are achieved. Rise above or fall
below your predetermined target times, and varying chimes and mes-
sages will provide feedback. Slow beeps indicate you’re behind pace
(SLOW), a single beep lets you know you’re on pace (ON-PACE) and rapid
beeps tell you are ahead (FAST). The screen will also display your per-
formance data. 
• When the Chrono is running, (icon of stopwatch) appears in the Time
Display.
• You can take up to 199 laps, however the chronograph will only record the most recent 150 laps. Please consider that each succeeding work-
out will require three laps of storage that will be used to stamp the
time/date, target time, and delta times for that workout. 
Changing the Chronograph Display FormatThis determines what is shown in middle and bottom lines of the display.
The middle line has the larger font. You have the option for LAP/SPLIT,
SPLIT/LAP and TOTAL RUN.
1. Press Mode until CHRONO appears. 
2. Press SET to start setting.
3. Press START/SPLIT (+) or STOP/RESET (-) to select LAP/SPLIT (Lap in large digits), SPLIT/LAP (Split in large digits), or TOTAL RUN.
22
W254_TAP_Booklet_EN_Layout 1  9/18/09  1:59 PM  Page 22 
						

							5.  If you select ON, press the MODE (NEXT) button untilTarget Pace (TRGT PACE) appears. 
6.  Press START/SPLIT (+) or STOP/RESET (-) to enter the Target Pace per lap time in hours (HH), minutes (MM)
and seconds (SS). Target Pace per lap can be set from
a minimum of 1 minute (1.00) to a maximum of 1 hour
(1:00.00).
7.  Press MODE (NEXT) button to enter the (TRGT RANGE) which is the margin of error (+/-) you are willing to consider your lap as 
“ON-PACE”. When Target Range appears, enter minutes (MM) and
 seconds  (SS).
8.  Press MODE (NEXT) button until Target Distance (TRGT DIST) appears. 
9.  Press START/SPLIT (+) or STOP/RESET (-) to select either NONE or SET.
10.  If you select SET, press MODE (NEXT) button until Unit Distance (UNIT DIST) appears. 
25
E
Setting the Target Time Pacer
1. Press MODE until CHRONO appears (Chrono reads 00:00:00 or pressSTOP/RESET to reset).
2. Press SET to start setting.
3. Press MODE (NEXT) button until TARGET TIME appears.
4. Press START/SPLIT (+) or STOP/RESET (-) to turn TARGET TIME ON or OFF. 
24
TA R GET
8’ LAP
START
ACTUAL
LAP 1 (10’00)-2’00 (slow)LAP 3 (7’00)+1’00 (fast)LAP 2 (8’00)(on time)FINISH
(on pace)
(slow)
(fast)
W254_TAP_Booklet_EN_Layout 1  9/18/09  1:59 PM  Page 24 
						

							27
E3.  Press MODE (NEXT) button until hydration (DRINK)appears.
4.  Press START/SPLIT (+) or STOP/RESET (-) to turn it ON. 
5.  Press MODE (NEXT) button to move to the time section and press START/SPLIT (+) or STOP/RESET (-) to set
the time. 
6.  Press MODE (NEXT) to select and to repeat the setting process for the nutrition (EAT) timer.
7.  Press SET (DONE) to finish.
RECALL 
The multiple training log will enable you to review your workout perform\
-
ance by date. You can review the times of every lap, best lap and average
lap. If the target time pacer was set, the watch will also provide the delta
times and labels for each segment.
11.  Press START/SPLIT (+) or STOP/RESET (-) to select either miles (MI)
or kilometers (KM).
12.  Press MODE (NEXT) until Target Distance (TRGT DIST) appears.
13.  Press START/SPLIT (+) or STOP/RESET (-) to enter the Total Target Distance of your overall training or race. 
14.  To finish, press SET (DONE). If a Total Target Distance was set, the watch will estimate and display your TARGET TOTAL time based on the
Target Pace and Target Distance you just provided in previous steps.
Hydration and Nutrition Timers
The optional hydration and nutrition timers will prompt you when it’s time
to drink or eat. This countdown timer will repeat and will run parallel to
your chronograph.
Setting the Hydration and Nutrition Timers 
1.  Press MODE until CHRONO appears.
2.  Press SET to start.
26
W254_TAP_Booklet_EN_Layout 1  9/18/09  1:59 PM  Page 26 
						

							29
ELocking workouts in RECALL 
Locking a workout prevents it from automatic deletion as new workouts
are performed. 
1. Press MODE until RECALL appears.
2. Press START/SPLIT to scroll among your workout dates. 
3. Once you find the workout press and hold STOP/RESET to LOCK. Asmall lock icon l will appear along with the workout date to confirm
the data’s status. 
4. To unlock any workout repeat the three steps above and press and hold STOP/ RESET to UNLOCK. 
Tips:
• In order to LOCK your latest workout you must reset the Chrono (00:00:00) to save the workout. 
• As the memory is filled (150-laps maximum), the oldest unlocked workouts are automatically deleted. 
Reviewing your Workout Data
1. Press MODE until RECALL appears.
2. Press START/SPLIT to select the date of the workoutyou want to review. Your workouts appear in reverse
chronological order and the number of stored laps
will appear. 
3. Once you find the workout you want to review, press SET to review all the information saved in that workout. 
• Press START/SPLIT (+) or STOP/RESET (-) to review your data (lap/split, delta times, best lap and average lap).
• If your Target Time Pacer was ON, you will be able to review your set- tings of the target time pacer (target pace, target distance and target
total), your actual lap/split times, your delta results per lap (+/- from
target time per lap with labels), Total delta time (if a Total Target
Distance was set), best lap and average lap.
4. Press SET (DONE) to exit.
28
W254_TAP_Booklet_EN_Layout 1  9/18/09  1:59 PM  Page 28 
						

							31
E4. Press MODE (NEXT) to advance to the next setting option.
5. Press START/SPLIT (+) or STOP/RESET (-) to select STOP AT END orREPEAT AT END.
6. Press SET (DONE) to finish the setting process.
Using the Timer
1. Tap the watch lens, or press START/SPLIT to start Timer. 
2. A timer melody chime will sound when the Timer reaches zero and stops and repeats. The melody can be turned off with the press of any
button. 
3. If you need stop or pause the timer, tap the watch lens or press STOP/RESET.
4. When finished, press and hold STOP/RESET to reset the Timer to the original time. If you Press and hold STOP/RESET a second time you will
clear the timer to 0.
• If workouts are locked and the memory has fewer than 30 laps avail-
able, the watch will signal that memory is becoming full by displaying
“x laps free”. Once no memory is available the watch will display
“memory full and it will be necessary to unlock saved workouts to free
up the space for the next workout to be recalled. 
TIMER
The Timer is used to countdown a fixed event time. The timer can be set
to repeat and countdown continuously, or to stop at the end of the count-
down. You can use the TapScreen
™Technology to activate and stop the
timer at any time. 
Setting the Timer
1. Press MODE until TIMER appears.
2. Press SET to begin setting the timer.
3. Press START/SPLIT (+) or STOP/RESET (-) to increase/decrease the countdown timer values.
30
W254_TAP_Booklet_EN_Layout 1  9/18/09  1:59 PM  Page 30 
						

							33
Elabels to help you see the intensity you should follow in your training
(Interval #, WARM, SLOW, MED, FAST and COOL).
Setting Interval Timers
1. Press MODE until INT TIMER appears.
2. Press STOP/RESET to select the workout you want to use (WRK-1, 2,or 3).
3. Press SET and SET INT TIMER will appear.
4. To select the interval (1-16) press START/SPLIT (+) or STOP/RESET (-).
5. Press MODE (NEXT) to set the interval time (HH:MM: SS) with START/SPLIT (+) or STOP/RESET (-).
6. Press MODE (NEXT) to select the Interval name (Interval #, WARM, SLOW, MED, FAST and COOL) with START/SPLIT (+) or STOP/RESET (-).
7. Press MODE (NEXT) to select STOP AT END or REPEAT AT END with START/SPLIT (+) or STOP/RESET (-).Note:If the Repeat timer is set under 15 seconds a single beep will ring
between repetition. 
Tips:• Happears in Time display when Timer is running. J appears when
timer is running and set to repeat at end.
• For repeat Timer operation, repetition number appears on bottom of screen.
• Maximum number of counted repetitions is 99.
• Timer will continue to run if you exit Timer mode.
• The INDIGLO
®night-light flashes and the timer melody will sound when
the timer countdowns to zero. 
INTERVAL TIMER WITH LABELS
Complex interval training routines become automatic and effortless with
three interval programs, each with up to 16 labeled intervals that can be
start or stop with the TapScreen
™Technology interface. We also added
32
W254_TAP_Booklet_EN_Layout 1  9/18/09  1:59 PM  Page 32 
						

							35
E• If your workout was set with REPEAT AT END, you will see the repeti-tion counter on the bottom line. 
3. Tap the watch lens, or press STOP/RESET to stop the Interval Timer once you reach all the repetitions that you need to do. 
4. When finished, press and hold STOP/RESET to reset the Interval Timer to the original time. If you press and hold STOP/RESET a second time
you will clear the timer to 0. 
Tips:
• Happears in Time display when interval timer is running. J , appears
when interval timer is running and set to repeat at end.
• If you select REPEAT AT END the timer will countdown all intervals and then repeat the entire sequence. 
• INDIGLO
®night-light flashes and the interval timer melody will sound
between each interval.
• The interval timer will continue to run if you exit the INT TIMER mode.
Repeat all these steps until you have set all intervals needed for your
workout. 
Using the Interval Timer 
1. Tap the watch lens, or press START/SPLIT to start the Interval Timer. 
2. An Interval timer melody chime will sound when the Timer reaches
zero and then starts the next interval timer. 
• The display will show the label at the top of the timer (Interval#, WARM, SLOW, MED, FAST and COOL). 
34
STARTINT 1(slow 3:00)INT 2 (fast 2:00) (x10)
W254_TAP_Booklet_EN_Layout 1  9/18/09  1:59 PM  Page 34