Sony Vegas 6 Manual

							CHP. 5ADVANCED EDITING TECHNIQUES
127
Pitch shifting audio events
A pitch shift is a way to raise or lower the pitch of an audio event. The semitone range is -24 to 24. Twelve 
semitones equal one octave, so you may increase or decrease the pitch of an event within a two-octave 
range. Within each semitone is a finer pitch adjustment called cents. There are one hundred cents in one 
semitone.
Editing from the timeline
1.Select an event.
2.Use the = and - keys on your keyboard (not the numeric keypad) to adjust pitch:
If the Active Take Information option is selected on the View menu, the event’s pitch shift is displayed in the 
bottom-left corner of the event. If the media has a known root note, the new root is displayed in 
parentheses: 
KeyResult
=Raise pitch one semitone.
Ctrl+=Raise pitch one cent.
Shift+=Raise pitch one octave.
Ctr+Shift+=Reset pitch.-Lower pitch one semitone.Ctrl+ -Lower pitch one cent.
Shift+ -Lower pitch one octave.Ctr+Shift+ -Reset pitch.
Original event
Event with pitch shift 
of 12 or one octave speeds up
Event with pitch shift
of -12 or one octave slows down
Change length and pitch 
						

							128
ADVANCED EDITING TECHNIQUESCHP. 5
Editing in the Event Properties dialog
1.Right-click the event and choose Properties from the shortcut menu.
2.On the Audio Event tab, choose a setting from the Method drop-down list to specify how you want to pitch-
shift the event, or choose 
None if you want to preserve the event pitch.
3.If you selected Classic from the Method drop-down list, indicate the new event length and amount of pitch 
shifting you want to apply:
a.Type the desired event length in the New length box.
b.Type the desired pitch shift (in semitones) in the Pitch change box. 
If you want to change the event length without changing pitch, type 0 in the box.
If you want the pitch to be determined by the amount of time stretching, select the 
Lock to stretch box. 
For example, doubling an event’s length will raise its pitch by one octave.
c.Choose a setting from the Stretch Attributes drop-down list to specify how you want to divide and 
crossfade the file to prevent artifacts. Depending on your source material, you may need to experiment 
with different crossfade types.
4.If you selected ACID from the Method drop-down list, indicate the new event tempo and the amount of 
pitch shifting you want to apply:
a.Type the desired event length in the New tempo box.
b.Type the desired pitch shift (in semitones) in the Pitch change box. 
If you want to change the event length without changing pitch, type 0 in the box.
If you want the pitch to be determined by the new event tempo, select the Lock to stretch box. For 
example, doubling an events tempo will raise its pitch by one octave.
5.Click OK. 
						

							CHP. 5ADVANCED EDITING TECHNIQUES
129
Time compressing/stretching events
Time stretching and compressing events is the process of using the same amount of source media to fill a 
shorter or longer event. While this can be done to both video and audio events, the two cases are 
fundamentally different. 
Press  and drag the edge of the event toward the center of the event to compress (shorten) it or drag the 
edge out away from the center to stretch (lengthen) it.
You can see the results of the time compression or stretching by viewing the properties of the event. Right-
click the event and choose 
Properties from the shortcut menu. Time compressing/stretching an audio event 
affects the 
Time stretch/pitch shift settings, while Time compressing/stretching a video event affects the 
Playback rate setting.
Tip: You can time compress/stretch several events at once by 
grouping them first. You can also apply a ripple edit after time 
compressing or stretching events. For more information, see 
Grouping events on page 179 or Applying post-edit ripples on 
page 110.
Time compressing/stretching video
Time stretching video allows you to fill a given duration with a set amount of actual video, sometimes called 
fit-to-fill. For example, if you have a five-second video event and you want this event to fill an eight-second 
slot, press 
 and drag the edge of the event to eight seconds. The resulting video is in slow motion, but the 
contents (footage) remain the same. If you had used a velocity envelope to slow the video to the same rate, 
the event would also be in slow motion, but its duration would remain unchanged at five seconds. Stretched 
video has a zigzag line between thumbnails. Video can also be compressed (sped up and shortened in length) 
by using this method.
When stretching video events or slowing video down, a set number of frames are extended across a period of 
time. For example, if you take source footage at 30 frames in a second and slow it so that only 15 source 
frames run during that same second, an additional 15 frames must be created to maintain the project’s 30 fps 
frame rate. Simply duplicating frames is the easiest way to do this. A more sophisticated method is to 
resample the frames of an event, allowing Vegas software to interpolate and redraw these intervening frames. 
For more information, see Resample (video only) on page 173 and Resampling video on page 232.
Ctrl
Ctrl 
						

							130
ADVANCED EDITING TECHNIQUESCHP. 5
Working with takes
A take is a version of a scene or audio recording, as in “Scene 10, Take 7”, which means the seventh time 
that scene number ten has been shot. A number of takes can be included in the same location (event) of the 
project. You can then rapidly switch between these separate takes to see which one fits into the project the 
best. Although this is what takes are designed for, you can actually use any media files you want as a take, 
even completely different sounds or scenes. Since an event is just a container of a specific length and at a 
specific location, the actual content (media file) is easily changed.
Adding takes
You can add multiple media files to the timeline at the same time to a single event as takes. You can also add 
regions within media files as takes. For more information, see Adding regions as takes on page 135.
Adding media files to the timeline as takes
1.Locate the media files that you want to insert as takes in the Explorer and select them. Select a range by 
pressing 
 and clicking the first and last file in the range, or select nonadjacent files by pressing  
and clicking the various clips individually.
2.Right-click and drag one of the selected clips in the group to the timeline.
3.From the shortcut menu, choose Add as Takes.
Tip: To add either just the audio or just the video portions of 
files as takes, choose 
Video Only: Add Video as Takes or Audio 
Only: Add Audio as Takes from the shortcut menu.
Adding takes to existing events
You can add media files to existing events as takes.
1.Right-click a media file in the Explorer and drag it to an existing event. 
2.From the shortcut menu, choose Add as Takes.
Selecting takes
When you add an event with multiple takes, a single event is inserted into a track. The length of the event is 
set according to the last clip that was selected. This last clip is set as the active take.
1.Right-click an event with multiple takes. 
2.From the shortcut menu, choose Ta k e, and choose Next Take or Previous Take from the submenu. 
Alternately, choose the name of the take from the list at the bottom of the submenu. 
Tip: Click an event and press  to select the next take or 
 to select the previous take.
ShiftCtrl
T
Shift+T 
						

							CHP. 5ADVANCED EDITING TECHNIQUES
131
Previewing and selecting takes
You can preview the takes for a given event.
1.Select an event containing multiple takes.
2.Right-click to display a shortcut menu or, from the Edit menu, choose Ta k e to display a submenu.
3.Choose Choose Active... from the submenu. The Take Chooser 
dialog appears.
4.Select the take that you want to preview and use the Play () and 
Stop () buttons within the dialog. 
5.To use a take, select it and click OK. The selected take is now the 
active take.
Deleting takes
You can delete individual takes from an event at any time.
1.Right-click an event with multiple takes. 
2.From the shortcut menu, choose Ta k e, and choose Delete Active from the submenu to immediately remove 
the active take. Alternately, choose 
Delete to open a dialog with a list of all of the takes contained in this 
event.
Working with take names
Displaying take names on events
Take names may be displayed on the events in the timeline. From the 
View menu, choose the Active Take Information option.
Changing take names
Changing the name of a take does not affect the source media file in 
any way. Typically, you may want to change an event’s name after 
recording multiple takes into a track or event. For more information, see Working with multiple recorded takes on 
page 206.
1.Select the take to be renamed. For more information, see Selecting takes on page 130.
2.Right-click the event to display a shortcut menu.
3.From the shortcut menu, choose Properties. The Properties dialog opens.
4.Type the new name in the Active take name box.
5.Click OK to set the new take name.
Without take name With take name 
						

							132
ADVANCED EDITING TECHNIQUESCHP. 5
Using the Trimmer window
The Trimmer allows you to work with and edit one media file at a time. The entire file is opened into the 
Trimmer, in contrast to events on the timeline that may only contain a portion of the actual source file. 
The main function of the Trimmer window is to allow you to trim a media file and place portions of it on a 
track. You can also add regions and markers to a file, preview the media file, or open it in an external audio 
editing program.
You can open any number of files in the Trimmer at the same time, selecting the one you currently want to 
work on from the 
Trimmer history drop-down list.
From the View menu, choose Tr i m m e r  or press  to display the Trimmer window, if it is not already 
visible. You can dock the Trimmer window in the window docking area or float it over the work area. For 
more information, see Window docking area and floating window docks on page 24.
Opening a file in the Trimmer
1.Right-click an event. A shortcut menu appears.
2.Choose Open in Trimmer.
You can also drag files to the Trimmer from the Explorer or the Project Media windows. 
Double-clicking a file to open it in the Trimmer
You can set the software to open a file in the Trimmer when you double-click the file in the Project Media or 
Explorer windows.
1.From the Options menu, choose Preferences.
2.Click the General tab.
3.Choose Double click on media file loads into Trimmer instead of tracks.
Trimmer 
Playback
LoopAdd media Cursor MarkerOpen in Clear Trimmer
Save Markers/Regions Remove Current Media From
Sort Trimmer
Loop region or
Selection area
Add media History
Audio Editorhistory
navigation controls
from cursorup to cursor
Trimmer History
History
Create subclip Select Parent Media
Zoom controls Media filePlayhead
Alt 
+2 
						

							CHP. 5ADVANCED EDITING TECHNIQUES
133
Moving frame-by-frame in the Trimmer window
As you navigate through a video file in the Trimmer, the exact frame that the cursor is over in time is 
displayed as in a thumbnail image under the cursor. When using the left and right arrow keys, this allows you 
to edit with frame accuracy. Make sure 
Animate video frames in Trimmer is selected on the General tab of the 
Preferences dialog to use this feature. 
Making selections in the Trimmer
After you have opened a media file in the Trimmer, you may select a segment of it and place it in your 
project. Make a time selection to select a segment in the Trimmer in the same way you do in the project 
timeline. For more information, see Selecting a time range on page 97. 
You can make a selection during playback by using the keyboard. Press  or  to mark the start of the 
selection, and press 
 or  to mark the end. 
If you know the exact timecode of the point where you want to begin and end a time selection, you can enter 
it into the boxes at the lower right corner of the Trimmer window. 
Tip: Press  to recall the last five time selection 
areas in the Trimmer.
Adding selections to the timeline
You can use the Trimmer window to do traditional three-point and two-point editing. These editing 
techniques allow you to add smaller sections of files to the timeline.
Post-edit ripple mode affects how a selection is added to the timeline from the Trimmer. When the Auto 
Ripple 
button () is selected, adding a selection from the Trimmer selection affects the position of later 
events on the track. When not in post-edit ripple mode, adding a selection from the Trimmer has no effect 
on the position of other events. For more information, see Editing events on page 99.
I[
O]
Double-click to enter a value.
Selection Selection Selection
Length End Start
Backspace 
						

							134
ADVANCED EDITING TECHNIQUESCHP. 5
Adding selections at the cursor 
1.Open a media file in the Trimmer.
2.Make a time selection in the Trimmer. 
3.Select the track in the timeline where the selection will be added.
4.Position the cursor in the timeline at either the start or end point where you want to add the selection.
5.Add the selection to the timeline in one of the following ways:
 Click the Add Media from Cursor button () or press  to insert the event after the cursor. 
 Click the Add Media up to Cursor button () or press  to insert the event before the cursor.
Alternately, you can drag the selection from the Trimmer to the 
timeline
Note: Post-edit rippling (if enabled) applies to clips inserted 
from the Trimmer. For more information, see Editing events 
on page 99.
Filling a time selection on the timeline 
You can select a range of time on the project timeline and then fill it with the same length selection from the 
Tr i m m e r .
1.Create a time selection in the timeline where you want to add the event. This sets the duration and 
position of the event that you will create.
2.Open the media file you want to use to fill the time selection in the Trimmer window.
3.Right-click the file in the Trimmer window and choose Sync Track View Selection Time from Cursor or 
Sync Track View Selection Time up to Cursor from the shortcut menu. A time selection is created in the file 
in the Trimmer window to match the time selection in the timeline. 
4.Adjust the location of the time selection in the Trimmer as needed by dragging the time selection (the 
area between the yellow triangles) on the Trimmer marker bar.
5.Drag the event from the Trimmer to the timeline and allow it to snap into place within the time 
selection.
Adding selections from a media file with audio and video
You can open a file in the Trimmer that has both audio and video streams (e.g., AVI). When you add a 
selection from this type of file to the timeline, both streams are added:
 If you select a video track before adding the selection, the video is added to the selected track and the 
associated audio is added to the track below it. 
 If you select an audio track before adding the selection, the audio is added to the selected track and the 
associated video is added to the track above it. 
New tracks are created for the added media if necessary.
A
Shift+A
Drag from the
Trimmer......to a project
track 
						

							CHP. 5ADVANCED EDITING TECHNIQUES
135
Adding and saving regions and markers to a media file
The Trimmer allows you to add markers and regions to a media file in the same way that you add them to 
your project. Media file markers and regions are different from project markers and regions. The difference 
between the two is that project markers and regions affect a project, while media file markers and regions are 
embedded in, and saved with, a media file. For more information, see Adding project markers and regions on page 
115.
The markers and regions you add in the Trimmer are only temporary. You must save them by clicking the 
Save button () in the Trimmer window if you want to use them again after you close the project. After the 
markers and regions are added and saved to the media file, they are available when you open the media file 
in an audio editor program or in the Trimmer.
Note: You cannot save markers to read-only media files. 
Change a file’s properties to make the file writable before 
saving markers.
Automatically saving Trimmer markers and regions with media 
files 
1.From the Options menu, choose Preferences.
2.On the General tab, select Automatically save trimmer markers and 
regions with media file.
 
Adding regions as takes
Once regions are saved with a media file, either in the Trimmer window or in another application, you can 
add the regions as takes to the timeline from the Explorer window. In the Explorer window, click the arrow 
next to the 
View button and select Region View from the drop-down list. A single media file may contain a 
number of separate regions. You can select these regions individually or as groups and insert them as takes 
into the timeline. This is especially useful when loop-recording numerous takes to a single file. For more 
information, see Working with takes on page 130.
MarkerRegion 
						

							136
ADVANCED EDITING TECHNIQUESCHP. 5
Viewing media markers and regions in events
From the View menu, choose Event Media Markers to toggle the display markers and regions that are saved in 
a media file. These markers are displayed in the timeline in events that refer to the media file.
Media markers and regions cannot be edited within the event. However, when you edit the markers in 
markers and regions in the Trimmer window or in an external audio editor, the event will reflect your 
changes.
Tip: When media markers are displayed, you can use them 
as snap points for positioning the cursor and for edge-
trimming if 
Snap to Markers is selected on the Options 
menu. If a media files frame rate does not match your project 
frame rate, frame quantization will occur after the snap if 
Quantize to Frames is selected on the Options menu. 
Opening a file in an external audio editor from the Trimmer
The Trimmer allows you to open your selected audio editing application (e.g., Sound Forge) to perform 
permanent edits to the media file. After you make the necessary changes and save the file in the audio editor, 
the event is automatically updated. Make sure that the media file’s name and location remain the same. For 
more information, see Using an external audio editing program on page 122.
To open the audio editor from the Trimmer, click the Open in Audio Editor button ().
Creating a subclip
This feature is available only in the full version of Vegas software.
1.Create a selection in the Trimmer window.
2.Click the Create Subclip button . The Create Subclip dialog is displayed.
Tip: You can also right-click an event in the timeline and 
choose Create Subclip from the shortcut menu.
3.In the Name box, type the name you want to use to identify the subclip in the Project Media window. For 
more information, see Using the Project Media window on page 47. By default, the file name is used with a 
subclip number appended.
Media markers in Trimmer
Media markers in event