Home > Siemens > Communications System > Siemens Saturn Iie Epabx General Description Manual

Siemens Saturn Iie Epabx General Description Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Siemens Saturn Iie Epabx General Description Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 428 Siemens manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							I 
    - 
    SATURN IIE EPABX A30808-X5130-BllO-l-8928 Installation Procedures Issue 1, May 1986 
    BASIC SHELF 
    LTU SHELF 
    Figure 5.00 Backplane Connectors 
    5-2  
    						
    							I 
    - 
    SATURN HE EPABX Installation Procedures A30808-X5130-BllO-l-8928 
    Issue 1, May 1986 
    ci 
    f Table 5.0 Signal and Power/Ground 
    CABLE TYPE 
    abling Reference List (Basic Cabinet) 
    , 
    TERMINATION POINTS 
    I I 
    (B) 
    ZONNECTOR EQUIPMENT CONNECTOR 
    (, 
    EQUIPMENT 
    CABLE 
    REF. NO. FIGURE 
    REF. NO. POWER/ 
    GROUND  SIGNAL 
    Wl 5.01 
    X PSU 
    basic J61 
    ! PSU 
    ! J12 
    J56 LTUl J46 
    J63 
    FDDO 
    basic 
    LTUl 
    2nd AC 
    W8 
    GRD E8 
    J14 GRD E7  FDDO 
    PSU 
    basic 
    X FDD3 
    J55 
    LTUl J45 
    J63 FDDl  basic 
    basic  w14 
    X 
    W18 X FDD2 
    w19 
    . GRD E8 
    E2 GRD El 
    5.01 X PSU 
    Table 5.01 Signal and Power/Ground Cabling Reference List (Expansion Cabinet) 
    I CABLE TYPE 
    I 
    TERMINATION POINTS 
    I 
    POWER/ 
    SIGNAL 
    GROUND 
    --I-- 
    X 
    (A) I (B) I CABLE FIGURE 
    REF. NO. REF. NO. 
    W6 5.02 EQUIPMENT CONNECTOR EQUIPMENT CONNECTOR 
    PSU J5,JB LTUPSl Jl,J2 
    LTUPS2 Jl,J2 
    LTUPSl Jl LTUP J42-J43 
    basic J60 LTU2 J46 
    5.02 X 
    5.04 X 
    5.04 X 
    5.04 X basic 
    basic J58 
    LTU2 J45 
    J59 LTU3 J46 
    -2z-p-k 
    basic 
    LTUPS2 J57 LTUB J45 
    Jl LTUB J42-J43 
    5-3  
    						
    							- 
    SATURN IIE EPABX 
    Installation Procedures A30808-X5130-BllO-l-8928 
    Issue 1, May 1986 
    BSK39.1.41186 -. --- - .^ . -. .- - rlgure s.ul rowemurouna Dlstrlbution (Basic Cabinet) 
    5-4  
    						
    							I I 
    - 
    SATURN IIE EPABX 
    A30808-X5130-BllO-l-8928 
    Installation Procedures 
    Issue 1, May 1986 
    EXPANSION CABINET REF. 
    L I 
    ? 
    . 
    LTUS 2 
    BASIC CABINET REF. 
    Figure 5.02 Power/Ground Distribution (Expansion Cabinet) 
    5-5  
    						
    							I 
    - 
    SATURN IIE EPABX A30808-X5130-BllO-l-B928 installation Procedures 
    issue 1, May 1986 
    w3 w13 
    / 
    1 / / I , 
    / / 
    LTUS 0 J47 
    J45 
    BASS 
    J56 
    563 
    J55 
    J61 
    w4 
    w14 
    3 d 
    I w2 ! 
    Wll 
    4-f  NV14 TO BE -1 ti LII DELETED IF 
    FDD2 IS USED) l.MJ u.l 
    2 1 0 FDD ? 
    I I , PSU 
    Figure 5.03 Signal Cable Distribution (Basic Cabinet) 
    5-6  
    						
    							I 
    - 
    SATURN IIE EPABX 
    Installation Procedures A30808-X5130-BllO-l-8928 
    Issue 1, May 1986 
    ., 
    EXPANSION CABINET 
    L,rJp. - - 
    -T-------- + 
    BASIC CA&NET 
    Figure 5.04 Signal Cable Distribution (Expansion Cabinet) 
    5-7 (5-8 blank)  
    						
    							- 
    SATURN IIE EPABX 
    A30808-X5130-8110-l-8928 
    installation Procedures issue 1, May 1988 
    SECTION 6.00 MDF CABLING AND TERMINATING ARRANGEMENTS 
    8.01 General. This section provides the MDF cabling proce- 
    dures and termination arrangements for the SATURN IIE System. 
    6.02 MDF Cabling. MDF cabling for the SATURN IIE Sys- 
    tem can be accomplished through either the top or bottom 
    of the cabinet (refer to Figures 6.00 
    and 8.01). The tie-wrap 
    holders at the top and bottom of the cabinet provide the means 
    to easilv form and secure MDF cables into oosition. Each MDF 
    cable connector (system side) should contain a 180° hood 
    (refer to Figure 6.02) to connect into the backplane connec- 
    tor and secured via two captive-type screws. Figure 6.03 pro- 
    vides an overview of the backplane MDF cable connectors and their corresponding card slot allocations on the basic and 
    LTU shelves. Figure 8.04 provides information pertaining to 
    connector/pin numbers for tip/ring and E&M leads. 
    6.03 MDF Terminating Arrangements. Tables 6.00 through 
    6.14 provide the necessary information on the terminating ar- 
    rangement at the MDF. Tables 6.00 through 6.06 provides the 
    MDF designations for the T&R leads for the basic shelf . Ta- 
    bles 6.07 through 6.14 provides the MDF designations for the 
    T&R leads for the expansion shelves. For information on MDF 
    cross-connections, refer to SATURN IIE EPABX Installation 
    Test Procedures Practice. 
    6-1  
    						
    							I 
    - 
    SATURN IIE EPABX A30808-X5130-BllO-l-8928 
    Installation Procedures Issue 1, May 1986 
    Rear View 
    14993.1.4ll7166 
    Figure 6.00 MDF Cabling via Top of Cabinet Assembly (View of Typical Cabinet) 
    6-2  
    						
    							I 
    - I 
    - 
    SATURN IIE EPABX 
    A30808-X5130-6110-1-8928 
    installation Procedures 
    Issue 1, May 1986 
    Lacil ig Bar 
     
    I I II O’ II II ‘. 
    II II II II I I 
    Tie-Wrap Holders 
    Figure 6.01 MDF Cabling via Bottom of Cabinet Assembly (View of Typical Cabinet) 
    6-3  
    						
    							- 
    - 
    SATURN HE EPABX 
    A30808-X5130-8110-l-8928 
    Installation Procedures 
    Issue 1, May 1966 
    Caoth re SC 
    Plug AMP N-o. 229940-l 
    C.4976.1.Y26/66 Figure 6.02 Required MDF Cable Connector 
    6-4  
    						
    All Siemens manuals Comments (0)

    Related Manuals for Siemens Saturn Iie Epabx General Description Manual