Sharp MX 2600N User Manual
Have a look at the manual Sharp MX 2600N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
24
BASE SCREEN OF COPY MODE
Touch the [COPY] key in the touch panel to open the base screen of copy mode.
Select copy settings in the base screen.
(1) [Colour Mode] key
Touch this key to change the colour mode.
(2) Output display
When one or more output functions such as sort,
group, staple sort, or saddle stitch have been
selected, this shows the icons of the selected
functions.
(3) [Exposure] key
This shows the current copy exposure and exposure
mode settings. Touch this key to change the
exposure...](http://img.usermanuals.tech/thumb/68/37878/w64_Sharp_MX-2600N-25.png "Page 26
24
BASE SCREEN OF COPY MODE
Touch the [COPY] key in the touch panel to open the base screen of copy mode.
Select copy settings in the base screen.
(1) [Colour Mode] key
Touch this key to change the colour mode.
(2) Output display
When one or more output functions such as sort,
group, staple sort, or saddle stitch have been
selected, this shows the icons of the selected
functions.
(3) [Exposure] key
This shows the current copy exposure and exposure
mode settings. Touch this key to change the
exposure...")
![Page 27
25
MAKING COPIES
This is the most basic procedure for making copies.
1Touch the [COPY] key.
The base screen of copy mode appears.
2Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
3Set the number of copies and then press the
[COLOUR START] key or the [BLACK & WHITE
START] key.
1-sided original1-sided copy
Colour ModeSpecial Modes
Plain2-Sided Copy
Output
File
Quick File
Copy Ratio100%
A41.A4R2.B43.A34.
OriginalPaper SelectAuto
A4
PlainAuto...](http://img.usermanuals.tech/thumb/68/37878/w64_Sharp_MX-2600N-26.png "Page 27
25
MAKING COPIES
This is the most basic procedure for making copies.
1Touch the [COPY] key.
The base screen of copy mode appears.
2Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
3Set the number of copies and then press the
[COLOUR START] key or the [BLACK & WHITE
START] key.
1-sided original1-sided copy
Colour ModeSpecial Modes
Plain2-Sided Copy
Output
File
Quick File
Copy Ratio100%
A41.A4R2.B43.A34.
OriginalPaper SelectAuto
A4
PlainAuto...")
![Page 28
26
2-SIDED COPYING
(Automatic Document Feeder)
You can use the automatic document feeder to make automatic
2-sided copies without the bother of manually turning the originals over
and re-inserting them.
This section explains how to copy 1-sided originals onto both sides of
the paper.
1Place the originals.
2Select settings in the touch panel.
(1) Touch the [2-Sided Copy] key.
(2) Touch the [1-Sided to 2-Sided] key.
(3) Touch the [OK] key.
3Set the number of copies and then press the
[COLOUR START]...](http://img.usermanuals.tech/thumb/68/37878/w64_Sharp_MX-2600N-27.png "Page 28
26
2-SIDED COPYING
(Automatic Document Feeder)
You can use the automatic document feeder to make automatic
2-sided copies without the bother of manually turning the originals over
and re-inserting them.
This section explains how to copy 1-sided originals onto both sides of
the paper.
1Place the originals.
2Select settings in the touch panel.
(1) Touch the [2-Sided Copy] key.
(2) Touch the [1-Sided to 2-Sided] key.
(3) Touch the [OK] key.
3Set the number of copies and then press the
[COLOUR START]...")
![Page 29
27
COPYING ON SPECIAL PAPER
(Bypass Copy)
Use the bypass tray to copy on special media such as heavy paper,
envelopes, and tab paper.
This section explains how to load A4 heavy paper in the bypass tray.
1Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2Insert paper in the bypass tray.
3Select settings in the touch panel.
(1) Touch the [Paper Select] key.
(2) Touch the paper type key of the bypass tray.
Here the [Plain] key has been...](http://img.usermanuals.tech/thumb/68/37878/w64_Sharp_MX-2600N-28.png "Page 29
27
COPYING ON SPECIAL PAPER
(Bypass Copy)
Use the bypass tray to copy on special media such as heavy paper,
envelopes, and tab paper.
This section explains how to load A4 heavy paper in the bypass tray.
1Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2Insert paper in the bypass tray.
3Select settings in the touch panel.
(1) Touch the [Paper Select] key.
(2) Touch the paper type key of the bypass tray.
Here the [Plain] key has been...")
![Page 30
28
Selecting a tray
Select settings in the touch panel. (Continued)
(4) Touch the [Auto-AB] key.
(5) Touch the [OK] key.
(6) Touch the bypass tray key.
(7) Touch the [OK] key.
4Set the number of copies and then press the
[COLOUR START] key or the [BLACK & WHITE
START] key.
To select paper, touch the [Paper Select] key or the image of the
machine in the base screen of copy mode.
Touch a key to select a tray.
(A) Touch to select one of trays 1 to 4.
(B) Touch to select the bypass tray.
(C) Touch to set...](http://img.usermanuals.tech/thumb/68/37878/w64_Sharp_MX-2600N-29.png "Page 30
28
Selecting a tray
Select settings in the touch panel. (Continued)
(4) Touch the [Auto-AB] key.
(5) Touch the [OK] key.
(6) Touch the bypass tray key.
(7) Touch the [OK] key.
4Set the number of copies and then press the
[COLOUR START] key or the [BLACK & WHITE
START] key.
To select paper, touch the [Paper Select] key or the image of the
machine in the base screen of copy mode.
Touch a key to select a tray.
(A) Touch to select one of trays 1 to 4.
(B) Touch to select the bypass tray.
(C) Touch to set...")
![Page 32
30
SELECTING THE EXPOSURE AND IMAGE
TYPE
You can specify the original image type to obtain a clearer copy.
The example of copying an original with light colours such as pencil
writing is explained below.
1Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2Select settings in the touch panel.
(1) Touch the [Exposure] key.
(2) Touch the [Light Original] key.
(3) Darken the printed result with the key.
Nine levels are available for the...](http://img.usermanuals.tech/thumb/68/37878/w64_Sharp_MX-2600N-31.png "Page 32
30
SELECTING THE EXPOSURE AND IMAGE
TYPE
You can specify the original image type to obtain a clearer copy.
The example of copying an original with light colours such as pencil
writing is explained below.
1Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2Select settings in the touch panel.
(1) Touch the [Exposure] key.
(2) Touch the [Light Original] key.
(3) Darken the printed result with the key.
Nine levels are available for the...")
![Page 33
31
FITTING THE COPY IMAGE TO THE
PAPER (Automatic Ratio Selection)
You can copy an original onto any size of paper using automatic
enlargement/reduction.
This section explains how to copy an A4 original onto A3 paper.
1Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2Select settings in the touch panel.
(1) Touch the [Paper Select] key.
(2) Touch the tray that has the desired paper size.
(3) Touch the [OK] key.
(4) Touch the [Auto Image]...](http://img.usermanuals.tech/thumb/68/37878/w64_Sharp_MX-2600N-32.png "Page 33
31
FITTING THE COPY IMAGE TO THE
PAPER (Automatic Ratio Selection)
You can copy an original onto any size of paper using automatic
enlargement/reduction.
This section explains how to copy an A4 original onto A3 paper.
1Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2Select settings in the touch panel.
(1) Touch the [Paper Select] key.
(2) Touch the tray that has the desired paper size.
(3) Touch the [OK] key.
(4) Touch the [Auto Image]...")
![Page 34
32
3Set the number of copies.
4Press the [COLOUR START] key or the
[BLACK & WHITE START] key.
Correct sets
Cancel copyingCancel scanning
mx3100_eu_qck.book 32 ページ ２００８年５月２７日 火曜日 午前８時４５分
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/68/37878/w64_Sharp_MX-2600N-33.png "Page 34
32
3Set the number of copies.
4Press the [COLOUR START] key or the
[BLACK & WHITE START] key.
Correct sets
Cancel copyingCancel scanning
mx3100_eu_qck.book 32 ページ ２００８年５月２７日 火曜日 午前８時４５分
Downloaded From ManualsPrinter.com Manuals")
![Page 35
33
ENLARGEMENT/REDUCTION
(Preset Ratios / Zoom)
For precise adjustment of the copy size, you can select a preset ratio
and/or adjust the ratio in increments of 1%.
As an example, this section explains how to reduce the image to 55%.
1Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2Select settings in the touch panel.
(1) Touch the [Copy Ratio] key.
(2) Touch the key.
(3) Touch the [50%] key.
Touch the preset ratio key that is closest to...](http://img.usermanuals.tech/thumb/68/37878/w64_Sharp_MX-2600N-34.png "Page 35
33
ENLARGEMENT/REDUCTION
(Preset Ratios / Zoom)
For precise adjustment of the copy size, you can select a preset ratio
and/or adjust the ratio in increments of 1%.
As an example, this section explains how to reduce the image to 55%.
1Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2Select settings in the touch panel.
(1) Touch the [Copy Ratio] key.
(2) Touch the key.
(3) Touch the [50%] key.
Touch the preset ratio key that is closest to...")
![Page 36
34
3Set the number of copies.
4Press the [COLOUR START] key or the
[BLACK & WHITE START] key.
Correct sets
Cancel copyingCancel scanning
mx3100_eu_qck.book 34 ページ ２００８年５月２７日 火曜日 午前８時４５分
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/68/37878/w64_Sharp_MX-2600N-35.png "Page 36
34
3Set the number of copies.
4Press the [COLOUR START] key or the
[BLACK & WHITE START] key.
Correct sets
Cancel copyingCancel scanning
mx3100_eu_qck.book 34 ページ ２００８年５月２７日 火曜日 午前８時４５分
Downloaded From ManualsPrinter.com Manuals")
29 MAKING COLOUR COPIES (Colour Mode) When colour and black & white originals are mixed together, you can have the machine automatically detect whether each original is colour or black & white and make each copy accordingly. The procedure for copying with the colour mode set to Auto for automatic detection of colour and black & white is explained below. 1Place the originals. When using the document glass, place the original with the side to be scanned face down. 2Select settings in the touch panel. (1) Touch the [Colour Mode] key. (2) Touch the [Auto] key. (3) Touch the [OK] key. 3Set the number of copies and press the [COLOUR START] key. OriginalCopy The side to be scanned must be face up! Colour Mode Copy Ratio100%OriginalPaper SelectAuto A4 PlainAutoA4 Full Colour ExposureAuto Colour ModeOK Full Colour Auto2 Colour Single Colour Plain A41.A4R2.B43.A34. A4 Special Modes 2-Sided Copy Output File Quick File (1) (2) (3) Cancel copyingCancel scanningCorrect sets mx3100_eu_qck.book 29 ページ ２００８年５月２７日 火曜日 午前８時４５分 Downloaded From ManualsPrinter.com Manuals
30 SELECTING THE EXPOSURE AND IMAGE TYPE You can specify the original image type to obtain a clearer copy. The example of copying an original with light colours such as pencil writing is explained below. 1Place the originals. When using the document glass, place the original with the side to be scanned face down. 2Select settings in the touch panel. (1) Touch the [Exposure] key. (2) Touch the [Light Original] key. (3) Darken the printed result with the key. Nine levels are available for the exposure. Darken light originals with the key, and lighten dark originals with the key. (4) Touch the [OK] key. 3Set the number of copies and then press the [COLOUR START] key or the [BLACK & WHITE START] key. Light originalExposure adjustment The side to be scanned must be face up! Colour Mode Copy Ratio100%OriginalPaper SelectAuto A4 PlainAutoA4 Full Colour ExposureAuto 153 ExposureOK ManualText/ Prtd.Photo Photo Text/Photo Map Text Printed Photo Light Original Auto Original Image Type Plain A41.A4R2.B43.A34. A4 Scan Resolution Special Modes 2-Sided Copy Output File Quick File (1) (4) (3)(2) Cancel copyingCancel scanningCorrect sets mx3100_eu_qck.book 30 ページ ２００８年５月２７日 火曜日 午前８時４５分 Downloaded From ManualsPrinter.com Manuals
31 FITTING THE COPY IMAGE TO THE PAPER (Automatic Ratio Selection) You can copy an original onto any size of paper using automatic enlargement/reduction. This section explains how to copy an A4 original onto A3 paper. 1Place the originals. When using the document glass, place the original with the side to be scanned face down. 2Select settings in the touch panel. (1) Touch the [Paper Select] key. (2) Touch the tray that has the desired paper size. (3) Touch the [OK] key. (4) Touch the [Auto Image] key. A4A3 The side to be scanned must be face up! Colour Mode Copy Ratio100%OriginalPaper SelectAuto A4 PlainAutoA4 Full Colour ExposureAuto Paper Select Paper TrayBypass Tray OK Plain Plain A4 4.A3 3.B4Plain 2.A4RPlain 1.A4Plain Colour Mode Copy Ratio100%OriginalPaper Select A3 PlainAutoA4 Full Colour ExposureAuto Auto Image Plain A41.A4R2.B43.A34. A4 Plain A41.A4R2.B43.A34. A4 Special Modes 2-Sided Copy Output File Quick File Special Modes 2-Sided Copy Output File Quick File (1) (4) (3) (2) mx3100_eu_qck.book 31 ページ ２００８年５月２７日 火曜日 午前８時４５分 Downloaded From ManualsPrinter.com Manuals
32 3Set the number of copies. 4Press the [COLOUR START] key or the [BLACK & WHITE START] key. Correct sets Cancel copyingCancel scanning mx3100_eu_qck.book 32 ページ ２００８年５月２７日 火曜日 午前８時４５分 Downloaded From ManualsPrinter.com Manuals
33 ENLARGEMENT/REDUCTION (Preset Ratios / Zoom) For precise adjustment of the copy size, you can select a preset ratio and/or adjust the ratio in increments of 1%. As an example, this section explains how to reduce the image to 55%. 1Place the originals. When using the document glass, place the original with the side to be scanned face down. 2Select settings in the touch panel. (1) Touch the [Copy Ratio] key. (2) Touch the key. (3) Touch the [50%] key. Touch the preset ratio key that is closest to 55% (the desired ratio). (4) Set the copy ratio to 55% with the key. The key decreases the ratio in increments of 1%, and the key increases the ratio in increments of 1%. (5) Touch the [OK] key. OriginalRatio-specified copy 55% The side to be scanned must be face up! Colour Mode Copy Ratio100%OriginalPaper SelectAuto A4 PlainAutoA4 Full Colour ExposureAuto Copy RatioOK Auto ImageXY Zoom 115% 122% 141% 70% 81% 86%100% % Zoom 100B4B5A3A4B5A5B4A4A4B5A3B4 B5A4B4A3A5B5A4B4B5B4A4A3 12 Copy Ratio 200% 400% 25% 50% 100% %55 OK Auto ImageXY Zoom Zoom22 Plain A41.A4R2.B43.A34. A4 Special Modes 2-Sided Copy Output File Quick File (1) (3) (5) (4) (2) mx3100_eu_qck.book 33 ページ ２００８年５月２７日 火曜日 午前８時４５分 Downloaded From ManualsPrinter.com Manuals
34 3Set the number of copies. 4Press the [COLOUR START] key or the [BLACK & WHITE START] key. Correct sets Cancel copyingCancel scanning mx3100_eu_qck.book 34 ページ ２００８年５月２７日 火曜日 午前８時４５分 Downloaded From ManualsPrinter.com Manuals
35 INTERRUPTING A COPY RUN (Interrupt Copy) When the machine is printing, you can temporarily interrupt the job and perform a copy job that you wish to prioritize. This feature is useful when you need to make an urgent copy during a long copy run. 1Touch the [Interrupt] key while the machine is printing. The [Interrupt] key appears in the base screen while the machine is printing. 2Place the originals. When using the document glass, place the original with the side to be scanned face down. 3Set the number of copies and then press the [COLOUR START] key or the [BLACK & WHITE START] key. The interrupted copy job will resume when the copy job is finished. PrintingInterrupt Original Colour Mode Copy Ratio100%OriginalPaper SelectAuto A4 PlainAuto Full Colour ExposureAuto Copies in progress from tray 2. Ready to scan for next copy job.7Interrupt Plain A41.A4R2.B43.A34. A4 Special Modes 2-Sided Copy Output File Quick File The side to be scanned must be face up! Cancel copyingCancel scanningCorrect sets mx3100_eu_qck.book 35 ページ ２００８年５月２７日 火曜日 午前８時４５分 Downloaded From ManualsPrinter.com Manuals
36 STORING COPY OPERATIONS (Job Programs) You can store a group of copy settings. The settings can be retrieved and used whenever needed. When you frequently use the same group of settings, this saves you the trouble of manually selecting the settings each time you need to use them. Storing a job program Using a job program 1Press the [#/P] key ( ). 2Select settings in the touch panel. (1) Touch the [Store/Delete] tab. (2) Touch the key in which you want to store a job program. Touch any key that is not highlighted. Keys that have a job program stored are highlighted. (3) Select the copy settings that you wish to store. (4) Touch the [Program Name] key. A text entry screen appears. Enter a name for the program. (5) Touch the [OK] key. 1Press the [#/P] key ( ). Place the original. 123 4 1456 789 101112 ExitJob Programs Press program number. RecallStore/Delete 123 RecallStore/Delete 4 7 101112 89 56 14 ExitJob Programs Press program number. Colour Mode Copy Ratio100%OriginalPaper SelectAuto A4 PlainAuto Full Colour ExposureAuto To store, make selections and press [OK], to delete, press [Cancel].CancelOK Plain A41.A4R2.B43.A34. A4 Special Modes 2-Sided Copy Output Program Name (1) (2) (5) (3) (4) mx3100_eu_qck.book 36 ページ ２００８年５月２７日 火曜日 午前８時４５分 Downloaded From ManualsPrinter.com Manuals
37 Deleting a job program 2Touch the key of the desired job program. After selecting the job program, set the number of copies and press the [COLOUR START] key or [BLACK & WHITE START] key to begin copying. 1Press the [#/P] key ( ). 2Select settings in the touch panel. (1) Touch the [Store/Delete] tab. (2) Touch the key of the job program that you wish to delete. Touch a key that is highlighted. Keys that have a job program stored are highlighted. (3) Read the displayed message and touch the [Delete] key. (4) Touch the [Exit] key. 123 4 1456 789 101112 ExitJob Programs Press program number. RecallStore/Delete 123 4 1456 789 101112 ExitJob Programs Press program number. RecallStore/Delete 123 RecallStore/Delete 4 7 101112 89 56 14 ExitJob Programs Press program number. StoreDeleteCancel A job program has been already stored in this location. 123 RecallStore/Delete 4 7 101112 89 56 14 ExitJob Programs Press program number. (1) (2) (3) (4) mx3100_eu_qck.book 37 ページ ２００８年５月２７日 火曜日 午前８時４５分 Downloaded From ManualsPrinter.com Manuals
38 SPECIAL MODES The special modes can be used for a variety of special-purpose copy jobs. This section introduces the types of copies that can be made with the special modes. (The procedures for using each special mode are not explained.) Each special mode has its own settings and steps, however, the basic procedure is the same for all modes. The basic procedure for selecting a special mode is explained on the next page using Margin Shift as an example. For the procedures for using the special modes, see SPECIAL MODES in 2. COPIER in the Operation Guide. Special modes To use a special mode, open the special modes menu and touch the key of mode that you wish to use. The menu consists of two screens. Use the keys to switch between the screens. Touch the [Special Modes] key in the base screen to open the special modes menu. When a special mode key encircled by is touched, the key is highlighted and the setting is completed. When any other special mode key is touched, a screen appears to let you select settings for that mode. The keys that appear vary by country and region and the peripheral devices that are installed.Colour Mode Plain Copy Ratio 100% A4R2.A41. B43.A34. OriginalPaper SelectAuto A4 PlainAuto A4 Full Colour ExposureAuto A4 Special Modes 2-Sided Copy Output File Quick File Special Modes 22 OK Image Edit FileProof Copy Colour Adjustments Slow Scan ModeOriginal CountMixed Size Original Stamp Quick File Special Modes 12 Card Shot Multi Shot OK Dual Page Copy Tandem Copy Tab Copy Transparency Inserts Erase Job Build Book Copy Covers/Inserts Margin Shift Pamphlet Copy OK Mirror Image B/W Reverse Multi-Page Enlargement CentringA3 Full Bleed Photo Repeat Image Edit OK Suppress Background Intensity Sharpness BrightnessColour Balance RGB Adjust Colour Adjustments 1st screen 2nd screenImage edit menu screen Colour adjustments menu screen mx3100_eu_qck.book 38 ページ ２００８年５月２７日 火曜日 午前８時４５分 Downloaded From ManualsPrinter.com Manuals