Samsung LN-S4095D TFT-LCD Television User Manual

							
Englis\b-79

Adjusting t\be Picture Quality and Position Automatically

T\bis feature allows t\be TV to self-adjust to t\be incoming video signal. T\be values of fine, coarse and position are adjusted automatically.

1
P°fess the 
SOURCE
button to select “PC”.
2
P°fess the 
ME\fU
button. P°fess the  o°f  button to select “Setup”, 
then p°fess  the 

E\fTER
button.

3
P°fess the  o°f  button to select “PC”, then p°fess the 

E\fTER
button.

4
P°fess the  o°f  button to select “Auto Adjustment”, then p°fess the 

E\fTER
button. The pictu°fe quality and position a°fe 
automatically adjusted, and the pictu°fe °fetu°fns to o°figinal view a
few seconds late°f. 
Select “Retu°fn” by p°fessing the  o°f  button, then p°fess the 

E\fTER
button to °fetu°fn to the p°fevious menu. 
P°fess the 

EXIT
button to exit.

BN68-01047J-01Eng.qxd  7/13/06  4:51 AM  Page 79 
						

							
Englis\b-80

C\banging t\be Picture Size (PC Mode)

You can select t\be picture size w\bic\b best corresponds to your viewing requirements.

1
P°fess the 
SOURCE
button to select “PC”.
2
P°fess the  o°f  button to select “Pictu°fe”, then p°fess the 
E\fTER

button. P°fess the  o°f  button to select “Size”,  then p°fess the

E\fTER
button.

3
P°fess the  o°f  button to select the sc°feen fo°fmat you want, thenp°fess the 

E\fTER
button.

• 16:9  :  Scales the pictu°fe to 92% of the TV sc°feen, °fega°fdless of the  aspect °fatio of the input sou°fce. 
• 4 : 3  :  Displays the pictu°fe as it is without changing the aspect °fatio  of input sou°fce.
Select “Retu°fn” by p°fessing the  o°f  button, then p°fess the 

E\fTER

button to °fetu°fn to the p°fevious menu. P°fess the 
EXIT
button to exit.

BN68-01047J-01Eng.qxd  7/13/06  4:51 AM  Page 80 
						

							
Englis\b-81

Viewing t\be Current Resolution

You can get t\be resolution information of your PC.

1
P°fess the 
SOURCE
button to select “PC”.
2
P°fess the 
ME\fU
button. P°fess the  o°f  button to select “Setup”, 
then p°fess  the 

E\fTER
button.

3
P°fess the  o°f  button to select “PC”, then p°fess  the 
E\fTER
button.
The °fesolution info°fmation is displayed on the sc°feen.

Select “Retu°fn” by p°fessing the  o°f  button, then p°fess the

E\fTER
button to °fetu°fn to the p°fevious menu. 
P°fess the 

EXIT
button to exit.

To change the °fesolution, see page 76.

BN68-01047J-01Eng.qxd  7/13/06  4:51 AM  Page 81 
						

							
Englis\b-82

1
P°fess the 
SOURCE
button to select “PC”.
2
P°fess the 
ME\fU
button. P°fess the  o°f  button to select “Setup”, 
then p°fess  the 

E\fTER
button.

3
P°fess the  o°f  button to select “PC”, then p°fess the 
E\fTER
button.

4
P°fess the  o°f  button to select “Image Reset”, then p°fess the 

E\fTER
button. The pictu°fe settings a°fe °feplaced with the facto°fy 
default values.
Select “Retu°fn” by p°fessing the  o°f  button, then p°fess the 

E\fTER
button to °fetu°fn to the p°fevious menu. 
P°fess the 

EXIT
button to exit.

Initializing t\be Picture Settings

You can replace all picture settings wit\b t\be factory default values.

BN68-01047J-01Eng.qxd  7/13/06  4:51 AM  Page 82 
						

							
Englis\b-8\f

Identi\fying Problems

If t\be TV seems to \bave a problem, first try t\bis list of possible problems and solutions.
If none of t\bese troubles\booting tips apply, call your nearest Samsung service center.

Problem

Poor picture quality.
Poor sound quality.
No picture or sound.No sound or sound is too low at 
maximum volume.
Picture rolls vertically.
T\be TV operates erratically.
T\be TV won’t turn on.
Remote control malfunctions
“C\beck signal cable” message.
“Not Supported Mode” message.
Digital broadcasting screen 
problem.
T\be image is too lig\bt or too dark.
Horizontal bars appear to flicker,
jitter or s\bimmer on t\be image.
Vertical bars appear to flicker, 
jitter or s\bimmer on t\be image.
Screen is black and power 
indicator lig\bt blinks steadily.
Image is not stable and may appear
to vibrate w\ben you \bave a 
computer connected to t\be PC input.
Image is not centered on t\be screen.
If a still image is displayed for 
an extended period of time, residual
images or blurring may appear. 

Possible Solution

Try anot\ber c\bannel.
Adjust t\be antenna.
C\beck all wire connections.
Try anot\ber c\bannel.
Adjust t\be antenna.
Try anot\ber c\bannel.
Press t\be

SOURCE
button.
Make sure t\be TV is plugged in.
C\beck t\be antenna connections.
First, c\beck t\be volume of units connected to your TV (digital broadcasting receiver, DVD, cable 
broadcasting receiver, VCR, etc.). T\ben, adjust t\be TV volume accordingly.
C\beck all wire connections.
Unplug t\be TV for \f0 seconds, t\ben try operating it again.
Make sure t\be wall outlet is working.
Replace t\be remote control batteries.
Clean t\be upper edge of t\be remote control (transmission window).
C\beck t\be battery terminals.
Ensure t\bat t\be signal cable is firmly connected to t\be PC source.
C\beck t\be maximum resolution and t\be frequency of t\be Video Adapter.
Compare t\bese values wit\b t\be data in t\be Display Modes.
Please c\beck t\be digital signal strengt\b and input antenna.
Adjust t\be Brig\btness and Contrast.
Adjust t\be Fine tuning.
Adjust t\be Coarse tuning and t\ben adjust t\be Fine tuning.
Adjust t\be Coarse tuning and t\ben adjust t\be Fine tuning.
On your computer c\beck: Power, Signal Cable.
T\be TV is using its power management system. 
Move t\be computer's mouse or press any key on t\be keyboard. 
If t\be setting is not correct, use your computer utility program to c\bange t\be display settings.
Your TV supports multiscan display functions wit\bin t\be following frequency domain:
Adjust t\be \borizontal and vertical position.
T\be screen position must be adjusted on t\be output source (i.e. STB) wit\b a digital signal.
W\ben you need to leave t\be monitor unused for an extended period of time, adjust t\be settings so 
t\bat t\be monitor automatically goes into energy saving mode or activates t\be screen saver to display
moving images.

Horizontal \frequency (kHz)  Vertical \frequency (Hz)
PC Maximum re\fres\b rate (at 60 Hz)
30~60
60~75
1920 x 1080

T\be TFT LCD panel uses a panel consisting of sub pixels  6,220,800 w\bic\b require sop\bisticated tec\bnology to produce.
However, t\bere may be few brig\bt or dark pixels on t\be screen. T\bese pixels will \bave no impact on t\be performance of t\be produ ct.

Appendix

BN68-01047J-01Eng.qxd  7/13/06  4:51 AM  Page 83 
						

							
Englis\b-84

Installing t\be Stand

1.
Place the TV face down on a soft cloth o°f cushion on a table.

2.
Put the stand into the hole at the bottom of the TV.

3.
Inse°ft sc°few into the hole indicated and tighten.

< 2 >< 3 >

Disconnecting t\be Stand

1.
Place the TV face down on a soft cloth o°f cushion on a table.

2.
Remove fou°f sc°fews f°fom the back of the TV.

3.
Sepa°fate the stand f°fom the TV.

4.
Cove°f the bottom hole with a cap.

< 2 >< 3 >< 4 >

Stand Swivel Function 

Place the TV mo°fe than 11.8 inches (300 mm) away f°fom the wall.
The°fe should be enough space between the wall and the TV.
Place the TV on a flat and stable space to easily swivel the TV.
-20˚ ~ 20˚
The TV can be swiveled to the left o°f °fight.
You can adjust the angle up to 20°to the left o°f °fight.

BN68-01047J-01Eng.qxd  7/13/06  4:51 AM  Page 84 
						

							
Englis\b-85

Components (Sold separately)

1   Ma°fk the location on the wall whe°fe the hole will be d°filled.Make ove°f 35 mm-depth-hole on the ma°fked location using d°fill.°bix ancho°fs on each hole on the wall.
Connect wall-b°facket to the wall with wood sc°fews afte°f fitting ancho°fs into the wall-b°facket .

Note: If t\fe br\bcket is not firmly fixed to t\fe w\bll, t\fe LCD TV m\by f\bll.

2  Tu°fn the powe°f off and unplug the powe°f co°fd f°fom the outlet.
Place the TV face down on a soft cloth o°f cushion on a table.
Attach the set-b°facket onto the °fea°f side of the TV set and secu°fe the sc°fews .

3  Inse°ft th°fee Hange°fs of the set-b°facket into the g°fooves of the wall-b°facket .
°bix set-b°facket and wall-b°facket with sc°fews .

Note: Be\bore in\ftalling the TV on the wall, \bir\ft connect the cable\f.

Wall-B°facket Set-B°facket Sc°few: 8 EAWood Sc°few: 7 EAAncho°f: 7 EA Sc°few: 3 EAInstallation Guide

M4 X L20
M6 X L14

Installing t\be Wall Mount Kit (LN-S4095D)

T\bis installation is to be used w\ben attac\bing t\be wall mount to a wall.
W\ben attac\bing to ot\ber building materials, please contact your nearest dealer.
T\bis LCD TV accepts a 200 mm x 200 mm VESA-compliant mounting interface pad.

How to assemble the Wall Mount Bracket

BN68-01047J-01Eng.qxd  7/13/06  4:51 AM  Page 85 
						

							
Englis\b-86

Installation \fotes

Installing t\be Wall Mount Kit (LN-S4695D)

Refe°f to the co°f°fect installation guide acco°fding to you°f wall b°facket.This LCD TV accepts a 600 mm x 400 mm VESA-compliant mounting inte°fface pad.

1. Contact a technician fo°f installing the wall b°facket.
2. Samsung Elect°fonics is not °fesponsible fo°f any damage to the p°foduct o°f inju°fy to you°fself o°f othe°fs if you elect to pe°ffo°fm the wall installation.
3. This p°foduct is fo°f installing on cement walls. The p°foduct may not stay in place when installed on plaste°f o°f wood.

\barts (Wall attachment panel is sold separately. Check with your dealer.)

Only use the components and accesso°fies shipped with the panel.
Wall-B°facket

Right: 1
Left: 1Sc°few 11 
M8 X L40 
Ancho°f : 11
Plastic Hange°f : 4
Sc°few 11 
M4 X L20  

Wall-B°facket Accesso°fies

How to assemble the Wall Mount Bracket

1   Inse°ft and tighten the Captive Sc°few in the di°fection of the a°f°fow. When done, mount the wall b°facket on the wall.

Wall B°facket
Captive Sc°few
Hinge
(Left)
The°fe a°fe two hinges
(left and °fight). Use the
co°f°fect one.
Hinge
(Right)
Befo°fe d°filling into the wall, check if the length between the two  locking holes at the back of the p°foduct is co°f°fect. If the length is too
sho°ft o°f long, loosen all o°f some of the 4 sc°fews on the wall b°facket 
to adjust the length.

Length between the
two locking holes

Check the installation diag°fam and ma°fk the d°fill points on the wall.
Use the 5.0 mm bit to d°fill holes deepe°f than 35 mm. 
°bix each ancho°f in the co°f°fesponding hole. Match each of the
b°fackets and hinge holes to the co°f°fesponding ancho°f holes and
inse°ft and tighten the 11 sc°fews  .

BN68-01047J-01Eng.qxd  7/13/06  4:51 AM  Page 86 
						

							
Englis\b-87

Fixing the TV panel to the wall attachment panel bracket

Installing t\be Wall Mount Kit (LN-S4695D)

The shape of the p°foduct may va°fy depending on the model. (The assemblies of the plastic hange°f and the sc°few a°fe the same)
2   Remove the 4 sc°fews on the back of the p°foduct.

Inse°ft the sc°few  into the plastic hange°f. (See the figu°fe below)

Tighten the 4 sc°fews in step 2 (plastic hange°f + sc°few  ) to the    
°fea°f holes of the p°foduct.
Remove safety pin ( ) and inse°ft the 4 p°foduct holde°fs into the 
co°f°fesponding b°facket holes ( ). Then place the p°foduct ( ) so 
that it is fi°fmly fixed to the b°facket. Make su°fe to °feinse°ft and tighten
the safety pin ( ) to secu°fely hold the p°foduct to the b°facket.

Wall B°facket

• Mount the p°foduct on the wall b°facket and make su°fe it is  p°fope°fly fixed to the left and °fight plastic hange°fs.
• Be ca°feful when installing the p°foduct on the b°facket as  finge°fs can be caught in the holes.
• Make su°fe the wall b°facket is secu°fely fixed to the wall, o°f the p°foduct may not stay in place afte°f installation.

LCD TV
Wall

How to Adjust Mounting Angle

Adjust the b°facket angle to -2° befo°fe installing it on the wall.

1. °bix the p°foduct to the wall b°facket.
2. Hold the p°foduct at the top in the cente°f and pull it fo°fwa°fd (di°fection
of the a°f°fow) to adjust the angle. (See the figu°fe to the °fight)
3. You can adjust the b°facket angle between -2° and 15°. 

Make su°fe to use the top cente°f, and not the left o°f the °fight side 
of the p°foduct to adjust the angle. 

BN68-01047J-01Eng.qxd  7/13/06  4:51 AM  Page 87 
						

							
Englis\b-88

1.
Inse°ft the locking device into the Kensington slot on the LCD TV (°bigu°fe 1), and tu°fn it in the locking di°fection (°bigu°fe 2).

2.
Connect the Kensington lock cable.

3.
°bix the Kensington lock to a desk o°f a heavy stationa°fy object.

Using t\be Anti-T\be\ft Kensington Lock

T\be Kensington lock is a device used to p\bysically fix t\be system w\ben using it in a public place. T\be locking device \bas to be purc\based separately. 
T\be appearance and locking met\bod may differ from t\be illustration depending on t\be manufacturer.
Please refer to t\be manual provided wit\b t\be Kensington lock for proper use.

°bigu°fe 2
°bigu°fe 1
Cable


Speci\fications

Model \fame
Screen Size (Diagonal)
\bower Supply
\bower Consumption
\bC Resolution
Sound

Output

Dimensions (WxDxH)
Body
With stand

Weight
With stand
Without stand

Environmental Considerations
Ope°fating Tempe°fatu°fe
Ope°fating Humidity
Sto°fage Tempe°fatu°fe
Sto°fage Humidity

L\f-S4095D

40 inches
AC 110-120 V
60 Hz
250 W
1920 x 1080@ 60 Hz
10 W + 10 W
994 x 92 x 647 mm
(39.1 x 3.6 x 25.5 inches) 994 x 290 x 696 mm
(39.1 x 11.4 x 27.4 inches)
24.5 kg (54.0 Ibs)19.5 kg (42.9 Ibs)
50 °°b to 104 °°b (10 °C to 40 °C)10% to 80%, non-condensing-4 °°b to 113 °°b (-20 °C to 45 °C)5% to 95%, non-condensing
Design and specifications a°fe subject to change without p°fio°f notice.

-20˚ ~ 20˚

L\f-S4095D L\f-S4695DStand Swivel (Left / Right)

Ye s Ye s

L\f-S4695D

46 inches
AC 110-120 V
60 Hz
310 W
1920 x 1080@ 60 Hz
10 W + 10 W
1129 x 106 x 732 mm
(44.4 x 4.2 x 28.8 inches) 1129.0 x 320 x 788 mm
(44.4 x 12.6 x 31.0 inches)
35.5 kg (78.3 Ibs)
30.0 kg (66.1 Ibs)
50 °°b to 104 °°b (10 °C to 40 °C)10% to 80%, non-condensing-4 °°b to 113 °°b (-20 °C to 45 °C)5% to 95%, non-condensing

This device is a Class B digital appa°fatus.

BN68-01047J-01Eng.qxd  7/13/06  4:51 AM  Page 88