Samsung LN-S4095D TFT-LCD Television User Manual

							
Englis\b-29

1
P°fess the 
ME\fU
button. P°fess the  o°f  button to select “Setup”,
then p°fess the 

E\fTER
button.

2
P°fess the  o°f  button to select “Clock”, then p°fess the 

E\fTER
button.

The Clock can be set automatically if you a°fe °feceiving a digital signal.
4
P°fess the  o°f  button to select “Time Zone”, then p°fess the 

E\fTER
button.
P°fess the  o°f  button to highlight the time zone fo°f you°f local a°fea
(and to move the highlight to the app°fop°fiate time zone on the map of the
United States), then p°fess the 

E\fTER
button.

5
P°fess the o°f button to select “DST”(Daylight Saving Time), then 
p°fess the 

E\fTER
button.
P°fess the 
o°f button to select “On” o°f “Off”, then p°fess the 

E\fTER
button.
Select “Retu°fn” by p°fessing the 
o°f button, then p°fess the 

E\fTER
button to °fetu°fn to the p°fevious menu. 
P°fess the 

EXIT
button to exit.

3
P°fess the  o°f  button to select “Clock Mode”, then p°fess the

E\fTER
button P°fess the  o°f  button to select “Auto”, then p°fess
the 

E\fTER
button.

Option 2: Setting the Clock Automatically

•When you set up Auto Time, the set time may not be co°f°fect depending 
on the b°foadcasting station and signal. If the°fe is a diffe°fence between 
the °feal time and set time, please set the time manually.

BN68-01047J-01Eng.qxd  7/13/06  4:50 AM  Page 29 
						

							
Englis\b-\f0

Setting t\be On/O\f\f Timer

1
P°fess the 
ME\fU
button. P°fess the  o°f  button to select “Setup”, then 
p°fess the 

E\fTER
button.

2
P°fess the  o°f  button to select “Time°f”, then p°fess the 
E\fTER
button.
P°fess the  o°f  button to select “On Time°f”, then p°fess the 

E\fTER

button. P°fess the  o°f  button to adjust “Hou°f/Min”, then p°fess the  button to move to the next step.                   °.     
Set othe°f items using the same method as above. 
To activate On Time°f with the setting ente°fed, set Activation to “Off,  
Mon~°b°fi, Daily o°f Once” by p°fessing  o°f  button. 
P°fess the 

E\fTER
button.     

3
P°fess the  o°f  button to select “Off Time°f”, then p°fess the 
E\fTER

button. P°fess the  o°f  button to adjust “Hou°f/Min”, then p°fess the 
button to move to the next step. Set othe°f items using the same method 
as above. 
To activate Off Time°f with the setting ente°fed, set Activation to “Off, 
Mon~Sat, Mon~°b°fi, Daily o°f Once”  by p°fessing  o°f  button. 
P°fess the 

E\fTER
buton.               
When finished, select “Retu°fn” by p°fessing  o°f  button and 

E\fTER
button to °fetu°fn to the p°fevious menu.
P°fess the
EXIT
button to exit.

• You can set the hou°f, minute, and channel di°fectly by p°fessing the numbe°f 
buttons on the °femote cont°fol.

Auto \bower Off
When you set the time°f “On”, the television will eventually tu°fn off, if no cont°fols a°fe ope°fated fo°f 
3 hou°fs afte°f the TV was tu°fned on by the time°f.
This function is only available in time°f “On” mode and p°fevents ove°fheating o°f leakage, which 
may occu°f if a TV is on fo°f too long (when you a°fe on vacation, fo°f example).

• You can set the hou°f, minute, and channel di°fectly by p°fessing the numbe°f buttons on the °femote cont°fol.

BN68-01047J-01Eng.qxd  7/13/06  4:50 AM  Page 30 
						

							
Englis\b-\f1

T\be sleep timer automatically s\buts off t\be TV after a preset time (from \f0 to 180 minutes).

1
P°fess the 
ME\fU
button. P°fess the  o°f  button to select “Setup”, then
p°fess the  

E\fTER
button.

2
P°fess the  o°f  button to select “Time°f”, then p°fess the 

E\fTER
button.
P°fess the  o°f  button to select  “Sleep Time°f”, then p°fess the

E\fTER
button. 

3
P°fess the  o°f  button to set sleep time°f to “30min, 60min, 90min, 120min, 150min, 180min o°f Off”, then p°fess the 

E\fTER
button. 
Select “Retu°fn” by p°fessing the  o°f  button, then p°fess the 

E\fTER
button to °fetu°fn to the p°fevious menu.
P°fess the 

EXIT
button to exit.

Setting t\be Sleep Timer

Alternate method

P°fess the 
SLEE\b
button on the °femote cont°fol °fepeatedly 
until the app°fop°fiate inte°fval appea°fs (any of the p°feset 
values f°fom “off” to “180 min”.)

BN68-01047J-01Eng.qxd  7/13/06  4:50 AM  Page 31 
						

							
Englis\b-\f2
Use t\be remote control to switc\b between viewing signals from connected equipment, suc\b as a VCR, DVD, Set-Top Box or t\be 
TVsource (broadcast or cable).

Viewing an External Signal Source

1
P°fess the 
ME\fU
button. 
P°fess the 

E\fTER
button to select “Input”.

2
P°fess the  o°f  button to select “Sou°fce List”, then p°fess the

E\fTER
button.
P°fess the  o°f  button to select a signal sou°fce, then p°fess the

E\fTER
button.

•When you connect equipment to the TV, you can choose between the 
following sets of jacks: “AV1”, “S-Video1”, “Component1”, “Component2”, 
“PC”, “HDMI1”, o°f “HDMI2” on the TV’s °fea°f panel, and "AV2", o°f 
"S-Video2" on the TV's side panel.

Alternate method
Setting the Signal Source

P°fess the 
SOURCE
button on the °femote cont°fol 
°fepeatedly to select an exte°fnal signal sou°fce.
Only connected devices can be selected.
Befo°fe selecting an input sou°fce, make su°fe the co°f°fesponding exte°fnal device is connected fi°fst.
HDMI input can be selected only when the exte°fnal device is tu°fned on and connected to the TV.

BN68-01047J-01Eng.qxd  7/13/06  4:50 AM  Page 32 
						

							
Englis\b-\f\f
T\bis feature enables you to name t\be input source you \bave connected.

Assigning Names to External Input Mode

1
P°fess the 
ME\fU
button. P°fess the 
E\fTER
button to select “Input”.

2
P°fess the  o°f  button to select “Edit Name”, then p°fess the

E\fTER
button.

3
P°fess the  o°f  button to select a signal sou°fce to edit, then p°fessthe 

E\fTER
button.

4
P°fess the  o°f  button to select the exte°fnal device : VCR, DVD, D-VHS, Cable STB, HD STB, Satellite STB, PVR STB, AV Receive°f, 
DVD  Receive°f, Game, Camco°fde°f, DVD Combo, DVD HDD Reco°fde°f, PC,
Inte°fnet TV Recv., Inte°factive TV Recv., VOD (Video On Demand) STB, TV.
P°fess the 

E\fTER
button. 
Set othe°f signal sou°fces (AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2) using the same method as listed above. 
Select “Retu°fn” by p°fessing the  o°f  button, then p°fess the 

E\fTER
button to °fetu°fn to the p°fevious menu. 
P°fess the 

EXIT
button to exit.

BN68-01047J-01Eng.qxd  7/13/06  4:50 AM  Page 33 
						

							
Englis\b-\f4

Selecting Your Favorite C\bannels

You can store your favorite c\bannels for eac\b available input source (suc\b as TV and CATV).
Preset : To use t\be C\bannel Manager function, first run Auto Program (see page 20).

C\bannel Control

1
P°fess the 
ME\fU
button. P°fess the  o°f  button to select “Channel”,
then p°fess the 

E\fTER
button.

2
P°fess the  o°f  button to select “Channel Manage°f”, then p°fess the 

E\fTER
button. P°fess the  o°f  button to select “All”, then 
p°fess the 

E\fTER
button.  

3
P°fess the  / / / buttons to select a channel,  then p°fess the 

E\fTER
button and option window
will appea°f. 
P°fess the  o°f  button to select “°bavo°fite”, the p°fess the

E\fTER
button and a ma°fk, designating the channel 
as a °bavo°fite Channel will appea°f. P°fess the 

E\fTER

button again to deselect  the selected channel and the ma°fk will disappea°f.
• Red button (List Mode) : If you p°fess the Red  button °fepeatedly, the All Channel List, the Added Channel 
List o°f the °bavo°fite Channel List is selected 
sequentially.

To Store Your Favorite Channels:

Only memo°fized channels can be set as °bavo°fite channels.

Select “Retu°fn” by p°fessing the  o°f  button, then 
p°fess the 

E\fTER
button to °fetu°fn to the p°fevious 
menu. P°fess the 

EXIT
button to exit.

Alternate method

Select Channel menu 
➔
Channel Manage°f 
➔
°bavo°fite
P°fess the 

FAV.CH
button °fepeatedly to jump f°fom one
favo°fite channel to anothe°f.

BN68-01047J-01Eng.qxd  7/13/06  4:50 AM  Page 34 
						

							
Englis\b-\f5
You can display a list of all c\bannels, added c\bannels, or your favorite c\bannels.
Preset : To use t\be C\bannel Manager function, first run Auto Program (see page 20).

Viewing t\be C\bannel Lists

1
P°fess the 
ME\fU
button. P°fess the  o°f  button to select “Channel”, 
then p°fess the 

E\fTER
button.

2
P°fess the  o°f  button to select “Channel Manage°f”, then p°fess the

E\fTER
button. P°fess the  o°f  button to select “All”, then p°fess the

E\fTER
button.  

3
If you want to watch the channel, p°fess the  / / / buttons to select a channel, then p°fess the 

E\fTER

button and the option window will appea°f.

4
P°fess the 
E\fTER
button to select “Watch”, then p°fess
the 

E\fTER
button again.
The selected channel b°foadcasting window will appea°f.

Alternate method

P°fess the 
CH MGR
button on the °femote 
cont°fol to display a list of channels.

BN68-01047J-01Eng.qxd  7/13/06  4:50 AM  Page 35 
						

							
Englis\b-\f6

Adding and Erasing C\bannels

Preset : To use t\be C\bannel Manager function, first run Auto Program (See page 20).

1
P°fess the 
ME\fU
button. P°fess the  o°f  button to select “Channel”, 
then p°fess the 

E\fTER
button.

2
P°fess the  o°f  button to select “Channel Manage°f”, then p°fess the 

E\fTER
button. P°fess the  o°f  button to select “Added” then 
p°fess the 

E\fTER
button.  

3
P°fess the  / / / buttons to select a channel, then  p°fess the 

E\fTER
button and option window will appea°f. 
P°fess the  o°f  button to select “Add”, then p°fess the 

E\fTER
button; the ma°fk  will appea°f and the channel 
will be added. 
To deselect the selected channel, p°fess the  o°f  button 
to select “Delete”, then p°fess the 

E\fTER
button. 
The ma°fk will disappea°f.

• Red button (List Mode) : If you p°fess the Red button  °fepeatedly, the All Channel List, the Added Channel 
List o°f the °bavo°fite Channel List is selected  sequentially.
• G°feen button (Add All) : P°fess to add all channels  of the channel list.
• Yellow button (Delete All) : P°fess to delete all channels  of the channel list.
Select “Retu°fn” by p°fessing the  o°f  button, then p°fess 
the 

E\fTER
button to °fetu°fn to the p°fevious menu. 
P°fess the 

EXIT
button to exit.

BN68-01047J-01Eng.qxd  7/13/06  4:50 AM  Page 36 
						

							
Englis\b-\f7

Labeling t\be C\bannels

Use t\bis feature to assign an easy-to-remember label to analog c\bannels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists
of five fields, w\bere eac\b field is a letter, a number or a blank. W\ben t\be 
INFO
button is pressed, t\be c\bannel label will appear.

1
P°fess the 
ME\fU
button. P°fess the  o°f  button to select “Channel”,
then p°fess the 

E\fTER
button.

2
P°fess the  o°f  button to select “Channel Manage°f”, then p°fess the

E\fTER
button. P°fess the  o°f  button to select “All”, then p°fess the

E\fTER
button.  

3
P°fess the  / / / button to select a channel, then p°fess the 

E\fTER
button and option 
window will appea°f. P°fess the  o°f  button to select
“Name”, then p°fess the 

E\fTER
button.

4
P°fess the o°f  button to select a lette°f, a numbe°f o°f a blank. (Results in this sequence: A...Z, 0...9, +, -,  *, /,
blank).

If you add o°f delete a TV channel, the labeled channels will also be added 
o°f deleted.

5
P°fess the  o°f  button to switch to the next field, which will be selected. Select a second lette°f o°f digit by p°fessing o°f  button, as above. 
Repeat the p°focess to select the last th°fee digits. To e°fase
the assigned new name, p°fess and hold the  o°f 
button until a blank appea°fs.
When you have finished, p°fess the 

ME\fU
button.
Select “Retu°fn” by p°fessing the  o°f  button, then 
p°fess the 

E\fTER
button to °fetu°fn to the p°fevious menu.
P°fess the 

EXIT
button to exit.

BN68-01047J-01Eng.qxd  7/13/06  4:50 AM  Page 37 
						

							
Englis\b-\f8

Fine Tuning Analog C\bannels

Use fine tuning to manually adjust a particular c\bannel for optimal reception.

1
P°fess the 
ME\fU
button. P°fess the  o°f  button to select “Channel”, 
then p°fess the 

E\fTER
button.

2
P°fess the  o°f  button to select “°bine Tune”, then p°fess the 

E\fTER
button. 

3
P°fess the  button. P°fess the  o°f  button to adjust the fine tuning. To sto°fe the fine tuning setting in the TV’s memo°fy, p°fess the 

E\fTER
button. 

4
To °feset the fine tuning setting, p°fess the  button to select “Reset”, then p°fess the 

E\fTER
button.
Select “Retu°fn” by p°fessing the  o°f  button, then p°fess the 

E\fTER

button °fetu°fn to the p°fevious menu. P°fess the 
EXIT
button to exit.

Only analog TV channels can be fine tuned.

" *" will appea°f next to the name of fine-tuned channels.

Analog

BN68-01047J-01Eng.qxd  7/13/06  4:50 AM  Page 38