Samsung Idcs 500 General Description Manual

log out of a station group. Stations out of a group will not receive calls to that group
but will continue to receive calls to their individual extension numbers. When de-
sired, the user may put him/herself back into the group by pressing the button
again. Users who do not have this button may dial the access code and the group
desired. A station user is allowed to be in several groups, providing a key and the
extender of that group are assigned for each group on the user’s phone.
INCOMING CALL...

LAN INTERFACE
The iDCS 500 LAN card provides a 10/100 base T Ethernet interface for connection
to a data network. This interface allows a high speed connection for PC program-
ming across an IP network. This interface also allows the system software to be
uploaded to the SmartMedia card via the PCMMC program.
LEAST COST ROUTING
Least Cost Routing (LCR) is the ability to automatically select the most cost effec-
tive central office route for the outside number dialed by any station. The iDCS 500
LCR...

MESSAGE WAITING KEY
The Message Waiting (MW) key is used in conjunction with a voicemail card. The
MW key is programmed with an extender matching a station or station group num-
ber and is used to access the voice mailbox associated with the extender.
MICROPHONE ON/OFF PER STATION
The microphone can be disabled at any keyset. When the microphone is disabled,
the keyset cannot use the speakerphone, although on-hook dialing and group lis-
tening are still possible.
MUSIC ON HOLD—FLEXIBLE
The iDCS 500...

Voicemail Sound File: If the iDCS 500 system has an optional CADENCE card in-
stalled, up to 100 custom recorded sound files from the Voice Mail card can be
used for MOH sources. For information on creating the sound files see CADENCE
System Administrator Manual-Recording greeting by number. If you select this
option be advised that each VMMOH source requires a dedicated CADENCE port/
channel.
NETWORKING
The iDCS 500 networking feature package (LE version of software) allows up to 4
iDCS 500 systems to...

Forward External. This feature operates in the same manner as a non networked
system with the exception that, because calls across a network link are trunk calls,
network calls do not follow the ICM FWD EXT ON/OFF setting in MMC 210. It is
therefore suggested that this setting be set to ON in a networked switch to avoid
confusion in operation between networked and non networked calls.
Call Intrusion (Barge In). This feature operates in the same manner as in a non
networked switch.
Call Offer/Call Waiting...

Centralized Voice Mail with Message Waiting Lights. This feature will only operate
with Cadence and/or SVMi voicemail systems only. Users in one node can call
forward (CFNR, CFB & CFU) to the Cadence group in a different switch and mes-
sages left in that switch will be indicated on the VMSG key in the origination switch.
Messages can be returned to the CVMAA by pressing the VMSG key.
OFF PREMISES EXTENSIONS (OPX)
A single line (tip and ring) extension from an 4SLI card may be connected to tele-
phone...

PARK ORBITS
The system has 10 park orbits (0–9). These orbits can be used to park calls prior to
paging and allows the call to be retrieved by dialing a park code plus the orbit
number. Calls parked in this manner can also be retrieved by dialing the park
pickup code (10) plus the station or trunk number. This feature is in addition to Call
Park and Page.
PRIME LINE SELECTION
Any station can be programmed to select a specific line, trunk group, telephone
number, station or station group when the handset...

AUTOMATIC / MANUAL
Ring destinations will automatically change based on time of day and day of week.
At any time the system can be manually forced into a specific ring plan. It will
remain in this ring plan until manually taken out.
HOLIDAY SCHEDULE
The system has a table of 20 dates that are used to define holidays. On a date
designed as a holiday the system will remain in a ring plan for that calendar day
providing the system was already in night service. This feature will override the
ring plan time...

SPEED DIAL NUMBERS
A library of 1500 speed dial numbers may be allocated as needed for iDCS 500-M
version software and 2500 speed dial numbers for iDCS 500-L version software.
The system list can have up to 500 numbers and each station can have up to 50
numbers. Speed dial numbers are assigned in blocks of ten. Each speed dial
number may contain up to 24 digits.
SPEED DIAL BY DIRECTORY
The iDCS 500 system provides the user with the ability to look up a speed dial
number and place the call. There are...

SYSTEM ALARMS
A DISA alarm will warn the customer if the DISA security system has been triggered
by too many incorrect password attempts. The alarm can ring any station or group
of stations and show an appropriate display at the assigned stations.
SYSTEM MAINTENANCE ALARMS
The iDCS 500 continuously performs internal system diagnostics. When either a
major or minor fault is detected the system can ring stations with an ALARM KEY
assigned. The keyset display shows information that includes the description,...