Ricoh Mp 2000 Service Manual
Have a look at the manual Ricoh Mp 2000 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Where to Put Your Machine 95 8 Power Connection The following describes power supply. R WARNING: R CAUTION: R CAUTION: R CAUTION: R CAUTION: When the main power switch is in the stand-by position, the optional anti- condensation heaters are on. In an emergency, unplug the machines power cord. When you unplug the power cord, the optional anti-condensation heaters turn off. Make sure the plug is inserted firmly in the wall outlet. Voltage must not fluctuate by more than 10%. The wall outlet shall be installed near the machine and shall be easily accessible. Connect the machine only to the power source described on the inside front cover of this manual. Connect the power cord directly into a wall outlet and do not use an extension cord. Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or fire. Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine. If the power cord is damaged (exposure of the core, disconnection, etc.), contact your service representative to change a new one. Operating the ma- chine with a damaged power cord may cause an electric shock or fire. When you disconnect the power plug from the wall outlet, always pull the plug (not the cable). To disconnect the power cord, pull it out by plug. Do not drag the cord itself. Doing so may result in damage to the cord, leading to fire or electric shock.
Remarks 96 8 Access to the Machine Place the machine near the power source, providing the clearance areas shown. 1.Rear: 5 cm (2) or more 2.Right: 25 cm (10) or more 3.Front: 75 cm (29.6) or more 4.Left: 15 cm (6) or more Note ❒For the required space when options are installed, contact your service repre- sentative. When Not Used for a Long Time R CAUTION: Note the following: If the machine has not been used recently, it requires time to initialize so can- not start printing immediately. Leave the machine switched on and wait about ten minutes. For safety reason, unplug the power cord from the wall outlet if the machine will not be used for an extended period of time such as holidays.
Maintaining Your Machine 97 8 Maintaining Your Machine If th e exposure glas s, exposure glass cover, ADF or ARDF belt is dirty, copy clar- ity may be reduced. Clean these parts if they are dirty. R CAUTION: Important ❒Do not use chemical cleaners or organic solvents, such as thinner or benzene. If such substances get inside the machine or melt plastic parts, a failure might occur. ❒Do not clean parts other than those explicitly specified in this manual. Other parts should only be cleaned by your service representative. ❖Cleaning the machine Wipe the machine with a soft, damp cloth, and then wipe it with a dry cloth to remove the water. Cleaning the Exposure Glass This section describes how to clean the exposure glass and scanning glass. Clean 1 and 2.Fire and breakdown can result from heavy accumulation of dust inside this machine. Consult your service representative for details about and charges for cleaning the machines interior.
Remarks 98 8 Cleaning the Exposure Glass Cover This section describes how to clean the exposure glass cover. Cleaning the ADF/ARDF This section describes how to clean the ADF or ARDF. Clean 1 and 2. AMH012S
99 INDEX A Add Toner indicator, 3 ADF , 1, 98 ADF/ARDF belt is dirty , 97 Adjusting the screens contrast , 6 ARDF , 1, 98 Authentication failure , 6 B Basic, 15 C Changing a Paper Size in the Optional Paper Tray Unit , 79 Changing the Paper Size , 71 Changing the Paper Size in the Paper Tray , 71 Changing to a Size Other Than Indicated on the Paper Size Selector , 78, 82 Cleaning the machine , 97 Combination Chart , 9 Combine , 15 Copies appear dirty , 13 Copies are too light , 13 D Display is off, 6 Duplex , 15 E Edit, 15 End fence , 65, 67, 71, 74, 79 Environments to Avoid , 94 Error indicator , 3 Error log , 41 Error Mail Notification , 36 Error Report (E-Mail) , 36 Exposure glass cover is dirty , 97 Exposure glass is dirty , 97 F Fax error report, 34 Function status indicator , 5 I Image is dirty, 45 Indicators , 3 Inserting Toner , 85 L Letterhead paper, 68 Limit mark , 65, 71 Loaded paper orientation , 68 Loading Paper into the Optional Paper Tray Unit , 67 Loading Paper into the Paper Trays , 65 Load Paper indicator , 3 Lock button , 71, 79 M Main power switch, 35 Meaning of beep patterns , 4 Memory is full , 17, 33 Multi-accessing , 9 N Network cannot be browsed, 54 Network Delivery , 54 Network Delivery function cannot be used, 54 No scan image , 53 O Operation Switch indicator, 6 Optimum Environmental Conditions , 93 Orientation-Fixed Paper , 68 Original Orientation , 68
100AE AE B843-7605 P Panel Tone, 4 Paper is not fed from selected tray , 45 Paper orientation , 68 Paper Size Selector , 78 Parts of image not copied , 13 Password not correct , 6 Power Connection , 95 Power Failure Report , 35 Power indicator , 35 Power supply , 95 Precautions when locating the machine, 93 Precautions when moving the machine, 94 Printed image is different from computer display , 45 Printed image is faded , 45 Printed image is in wrong orientation , 45 Printer driver installation , 37 Printing , 29 Printing does not start , 42 R RDS (Remote Diagnostic System), 35 Reception , 29 Release button , 71 Removing Jammed Paper , 89 Replacing Toner , 85 Reverse side of original is copied , 13 S Scanned image contains white spaces, 53 Scanned image is dirty , 53 Scanned image is distorted , 53 Scanned image is out of position , 53 Scanned image is upside down , 53 Scanner Properties dialog box not displayed, 54 Server-Generated Error E-mail , 36 Shadow appears on copies , 13 Side fences , 71, 74, 79 Stamp cartridge replacement , 87 Status Messages , 39 T Toner, 84, 85, 86 Transmission , 29 Transmission/Reception , 29 TWAIN , 60 Two-Sided Paper , 68 U User code entry, 6 V Volume adjustment, 19 W Waste Toner, 86 When A is displayed , 89 When B is displayed , 89 When P is displayed (ADF) , 89 When P is displayed (ARDF) , 89 When R is displayed , 89 When Using 11×17 Size Paper , 74 When Y is displayed , 89 When Z is displayed , 89
In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a means POWER ON. c means STAND BY. Trademarks Microsoft ®, Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the United States and/or other countries. TrueType is registered trademarks of Apple Computer, Inc. PostScript ® and Acrobat® are registered trademarks of Adobe Systems, Incorporated. PCL is a registered trademark of Hewlett-Packard Company. Bluetooth is a Trademark of the Bluetooth SIG, Inc. (Special Interest Group) and licensed to Ricoh Company Limited. Other product names used herein are for identification purposes only and might be trademarks of their respective companies. We disclaim any and all rights to those marks. The proper names of the Windows operating systems are as follows: The product name of Windows ® 95 is Microsoft® Windows® 95 The product name of Windows ® 98 is Microsoft® Windows® 98 The product name of Windows ® Me is Microsoft® Windows® Millennium Edition (Windows Me) The product names of Windows ® 2000 are as follows: Microsoft ® Windows® 2000 Advanced Server Microsoft ® Windows® 2000 Server Microsoft ® Windows® 2000 Professional The product names of Windows ® XP are as follows: Microsoft ® Windows® XP Professional Microsoft ® Windows® XP Home Edition The product names of Windows Server TM 2003 are as follows: Microsoft ® Windows ServerTM 2003 Standard Edition Microsoft ® Windows ServerTM 2003 Enterprise Edition Microsoft ® Windows ServerTM 2003 Web Edition The product names of Windows NT ® are as follows: Microsoft ® Windows NT® Server 4.0 Microsoft ® Windows NT® Workstation 4.0 Copyright © 2006
Operating Instructions Troubleshooting Type for MP 1600L/Aficio MP 1600L/IS 2316L Type for MP 2000L/Aficio MP 2000L/IS 2320L AE AE B843-7605