Panasonic Matrix Switcher Wj Sx150 Operating Instructions

83
Alarm Group
REC Mode:Select the desired setting by clicking on
the radio button.
EXT:Select this to gen-lock the unit during the alarm
recording.
INT:Select this if the asynchronous unit is connected to
the unit. When it is activated, the drop-down menu
becomes also active so that you can select the
desired normal recording rate. 002, 004 to 128
(field) are selectable.
The factory default setting is EXT.
DYNAMIC REC:Select the desired setting by clicking
on the drop-down menu.
ALM-PRI:Select this to...

84
●Multiplexer Title
●How to Display
To display this window, click on the  (Multiplexer Title)
button in the main window (p. 65.)
●How to Display
Note:This window can be displayed only when Yes is
selected in the Recorder window. (Refer to p. 66.)
●Parameters
The factory default settings are same as the illustration.
(The text box covered with the cursor is “C”.)
To edit the desired camera’s title, click on the associated
button (Cam 1 to Cam 16).
The subsequent editing procedure is the same as Camera...

85
■Account Manager
This window configures the parameters of the operators
who can control WJ-SX150 Administrator Console: the reg-
istration, edit and deletion of an operator.
The window soon after opening
The window during the edit
●How to Display
To display this window, click on the  (Account
Manager) button in the main window (p. 65).
Note: Register at least one operator with level 1. If there is
no level 1 operator, the configuration of WJ-SX150
Administrator Console will become impossible....

86
■Communication Port
This window configures the PCs usable communication
port number and its baud rate (communication speed).
●How to Display
To display this window, click on the  (Communication
port) button in the main window (p. 65).
●Parameters
• Parameter Group
Com:Select the PCs communication port for the con-
nection to the unit.
Baud Rate:Select the desired baud rate (communica-
tion speed). 4800, 9600, 19200 or 38400 bps is
selectable.
The factory default setting is 38400 bps.
• Fixed Parameter...

87
OPERATING PROCEDURES
(TERMINAL MODE) 

88
LOG-IN AND LOG-OUT
Before starting the following procedures, all system compo-
nents must be turned on.
The following procedures are applicable when the system
controller is connected to the unit.
■ Log-in
This operation is skipped when the auto log-in is set to ON.
(Refer to p. 89.)
1. Turn on the power switches of all system components. 
The OPERATE indicator will light up.
2. To turn on the power of the system controller, connect
the AC adapter to the AC outlet.
The LINK indicator lights up and NO...

89
■ Log-out
This operation is skipped when the auto log-out is set to
ON. 
This function is used when an operator leaves the controller
or no longer requires access to the system.
1. To logout from the system press the CLEAR button
while holding down the SHIFT button.
NO USER appears on the LED display of the con-
troller.
Notes:
•If you want to save the power consumption, discon-
nect the PC plug from the controller, and remove
the AC adapter from the AC outlet.
•If the auto log-out is set to ON, any...

90
■ Priority Lock
● Applying Priority Lock
1. Select the desired monitor. (Refer to Monitor Selection).
2. Press the MON (ESC) button while holding down the
SHIFT button to toggle the priority lock mode on and off
on the active monitor.
If the priority lock mode is selected, the monitor number
will inversely appear on the active monitor as shown in
the figure.
Note:This function will prevent operators with lower priority
from gaining control of a monitor.
However, higher or equal priority operators may...

91
■ Camera Selection
1. Select the desired monitor. (Refer to p. 90 Monitor
Selection.)
2. Press the numeric buttons to select the desired camera
number (1 to 16).
3. Press the CAM (SET) button.
The selected cameras image will appear on the active
monitor. The CAMERA indicator will light up and the
selected camera number will appear on the LED dis-
play on the controller.
SETUP
SHIFT
REW/FF
STEP
GROUP SEQ
PAUSE
SUSPEND
F1
CAM SETUPALL RESET
ACKRESET
F2
TOUR SEQ
PREVNEXT
STOP
OSD
RECORDER
INDEX
STOP...

92
Buttons and control for cameras or camera site accessories
are located on the right side of the front panel of the system
controller.
Included are zoom control, focus control, iris control, preset
and pan/tilt controls. 
Normally, combination cameras equipped with the specific
feature or a WV-RC100 or WV-RC150 Receiver are required
to utilize these functions.
Note:Refer to the cameras operating instructions whether
to confirm that each function is available.
■ Lens Control
This function is available...