Panasonic Matrix Switcher Wj Sx150 Operating Instructions

63
■MUX CAMERA TITLE
●How to Display
This menu will appear only when the Multiplexer board is
installed in the unit. To display this menu on the monitor,
move the cursor to 1000 MUX CAMERA TITLE in SETUP
MENU by moving the joystick to Dor C. Then, press the
CAM (SET) button. The submenu appears monitor.
●How to edit
The factory default settings are same as illustrations.
The editing procedure is the same as 500 CAMERA TITLE.
(Refer to p. 59.)
Notes:
•Up to 8 alphanumeric characters are available for
each...

64
•Intel and Pentium are trademarks of Intel Corporation.
•Microsoft
® Windows®are either registered trademarks
of Microsoft Corporation in the United States and/or
other countries.
•VD2 is the original synchronization system of
Matsushita Communication Industrial Co., Ltd. and
Matsushita Electric Industrial Co., Ltd.
•Other company names and product names appearing
in the manual are registered trademarks or trademarks
of the company concerned.
Platform
To install WJ-SX150 Administrator Console, the PC...

65
3. When terminating the software, click on the EXIT button
or press the ESC button on the PC keyboard. The main
window will close and WJ-SX150 Administrator Console
will be terminated.
Note: The operator name and password are changeable.
Operator addition is also available. The configuration of
each operator name, password and level are neces-
sary. (Refer to p. 85 Account Manager.)
■The Main Window
This window appears when starting up WJ-SX150
Administrator Console.
Clicking on each button in the...

66
In addition, the main window has the following buttons.
(File Open):
Select Setup Data File window (p. 84)
(Account Manager):
Account Manager window (p. 85)
(Communication Port):
Communication Port window (p. 86)
(Panasonic):
Opens the version information window of WJ-
SX150 Administrator Console.  Clicking on OK
button will close the window.
Notes:
•To reflect each configuration to the system, save the file
by pressing the SAVE button before closing the win-
dow.  After that, be sure to put the file...

67
Recorder Control: Click on the desired radio button to
determine the recorder type.
OFF:Select this when no recorder is connected to the
unit.
HD100:Select this when a WJ-HD100 Series recorder
is connected to the unit.
HD500:Select this when a WJ-HD500 Series recorder
is connected to the unit.
The factory default setting is HD500.
•Unit Address
This parameter is configurable only when HD100,
HD200 or HD500 is selected in the Recorder window.
When OFF is selected there, this parameter is dis-
played in...

68
■Get a Configuration Data from SX150
Pressing this button will start the getting of the configuration
data from the unit to the PC.
●How to Display
To display this window, click on the  (Get from
SX150) button in the main window (p. 65).
●Parameters
The file name of the configuration data appears.
(OK) button
To get the configuration data from the unit to the PC, click
on this button.
(Cancel Exit) button
To cancel the getting of the configuration data from the unit
to the PC, click on this button....

69
■Group Sequence
This window configures the parameters of group
sequences.
Each group sequence has up to 4 tour sequences which
are assigned to the monitors.
●How to Display
To display this window, click on the  (Group
Sequence) button in the main window (p. 65).
●Parameters
Mon 1 - Mon 4
Selects the tour sequence displayed on each monitor.
(Tour Sequence) button
Displays the Tour Sequence window for the tour sequence
configuration.
(Save Exit) button
Saves the configuration and closes the Group...

70
■Timer Event
This window configures the parameters of timer events:  the
schedule (daily, weekly or monthly) and action.
Up to 30 events are configurable.
tour sequence or spot mode is selectable.
●How to Display
To display this window, click on the  (Timer Event) but-
ton in the main window (p. 65).
●Parameters
• Enable
Checking on the box will enable the configuration.
• Schedule Mode Group
Check on the desired box for the timer event configuration.
Daily:To execute the event at a desired time...

71
Notes:
•When the camera cleaning is active, cleaning will begin
from CAM 1 in numerical order.
•Surveillance is impossible during the cleaning.
•The cleaning cannot be stopped after it is started.
■Daylight Saving Time/Summer Time
This window configures the parameters of daylight saving
time (summer time). 
●How to Display
To display this window, click on the  (Daylight Saving
Time) button in the main window (p. 65).
●Parameters
• Enable
Checking on the box will enable the configuration.
• Date Group...

■Alarm Mode
This window configures the operation parameters when an
alarm signal is input: an alarm mode, auto reset time and
alarm input. 
●How to Display
To display this window, click on the  (Alarm Mode) but-
ton in the main window (p. 65).
●Parameters
• Alarm Mode
Checking on the box of the desired alarm mode.
OFF:The system operation does not change into any
other mode.
Sequence Mode:Camera images are displayed on the
monitor in either the spot mode or tour sequence.
When more than one alarm are...