Panasonic Matrix Switcher Wj Sx150 Operating Instructions

73
REC ONLY:Only an alarm recording will start and
monitors will keep displaying the current
sequence/spot images.
Note:You cannot recover alarm-related operations
from system controllers when REC ONLY is
selected.
OFF:An alarm input is accepted neither via the CAM-
ERA IN connectors nor the RS-485 ports.
The factory default setting is OFF.
Alarm Port
This stands for that an alarm input is accepted via the
ALARM port (25-pin D-sub connector) at the rear panel.
ON:The alarm-associated sequence/spot image...

74
• Alarm Reset Time
Select the time to reset the alarm input. 
The selectable time: OFF (not resetting the alarm), 10, 20,
30, 40, 50, 60, 120 or 180 (seconds)
The factory default setting is 30 sec.
(Save Exit) button
Saves the configuration and closes the Alarm Mode win-
dow.
(Cancel Exit) button
Cancels the configuration and closes the Alarm Mode win-
dow.
■Alarm Event
This window configures the details of operation parameters
when an alarm signal is input: the monitor and mode to dis-
play the alarm...

75
■Operator Registration
This window configures the parameters of each operator:
the ID, password, level, priority and camera access.
Note:Before configuring this window, check on the
restrict level of each operation in the Level Table
window.
●How to Display
To display this window, click on the  (Operator
Registration) button in the main window (p. 65).
●Parameters
• Operator Number
This box displays a list of registered operators.
1-6:These are operator numbers who are registered as
the factory...

76
■Level Table
This window configures the restrict level of each operation. 
The restrict level is classified in Level 1, 2, and 3.
●How to Display
To display this window, click on the  (Level Table) but-
ton in the main window (p. 65).
●Parameters
• Permission
Click on each checkbox to classify the following operations
by three levels.
SX150 Setup:Setting up this matrix switcher system
Camera Setup:Setting up the cameras
Alarm History Display:Displaying the alarm history
Video Loss History...

77
■Auto Login/Logout (Auto Log-in/Log-
out) 
This window configures the auto log-in/log-out parameter of
each data port.
An operator is selectable for auto log-in function.
The log-out time is selectable for auto log-out function.
●How to Display
To display this window, click on the  (Auto
Login/Logout) button in the main window (p. 65).
●Parameters
• Auto Login Box
Click on the checkboxes DATA 1 to 4 to select an operator
for auto log-in. Then, select an operator ID. It will be the
log-in ID of the...

78
●Clock
This window configures the units clock.
The pattern of the Time & Date box depends on the setting
through the Time & Date window.
This picture is the example for U. S. model.
• How to display
To display this window, click on the (Clock) button in
the Time & Date window.
• Parameters
Time & Date Box: To adjust the clock, click on the ▼or
▲buttons of Year, Month, Day, Hour and/or Minute 
(Put to SX150) button:Changes the units
clock time into the one which has been configured
in this window....

79
■Camera Title
This window configures the title for each camera.
Up to 20 characters (camera title + alphanumeric charac-
ters) are available for the title.
WJ-SX150 Administrator Console has the following built-in
characters:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs
tuvwxyz0123456789!#$%&()*+,–./:;
,=/?•_ÄÜÖÆÑÂØäüöæñâøÁÇÉÌÒÙßàáâçèéêëìíîïòóôùúû
In addition, symbols, special characters and original char-
acters are editable in the bitmap font. 
●How to Display
To display this window, click on the...

80
●Edit Font Window
The Window Soon after Opening
The Window during the Edit
• How to Display
To display this window, click on the Edit Font button in the
Camera title window.
• Parameters
User Font Box: The registered user font characters are
displayed here. Up to 320 characters (20 for each
camera x 16) are registerable.
Edit Font Box: The selected user font characters are
displayed here in 12 x 13 dots.
(Delete) button: Deletes an user font character.
1. Click on the desired character in the User...

81
■Data Port
This window configures the parameters of each data port
(RS485, DATA 1 to 4 and DATA HDR port): the protocol, the
baud rate (communication speed), and the connected
cameras.
●How to Display
To display this window, click on the  (Data Port) button
in the main window (p. 65).
●Parameters
• RS-485 Port Group
Protocol:Select RS485 when an RS-485 camera is
connected to the data port.
Select CU360C when the system controller is con-
nected to the data port.
Select PSD when the system controller...

82
■Multiplexer Mode
●How to Display
Note:This window can be displayed only when “Yes” is
selected in the Recorder window. (Refer to p. 66.)
●Parameters
To display this window, click on the  (Multiplexer
Mode) button in the main window (p. 65.)
• Multi Monitor Out Group
Still Display:Select the desired setting by clicking on
the drop-down menu.
ON:Still picture is available during the multiscreen dis-
play.
OFF:Still picture is not available during the multiscreen
display.
The factory default setting is...