Panasonic Matrix Switcher Wj Sx150 Operating Instructions

22
In the factory default setting, you can control the unit, if you connect a PS·Data system controller to the DATA 4 port. For exam-
ple, if you connect a PS·Data unit supporting network connections (refer to p. 43), remote-control of the unit and the PS·Data
units will be available with a system controller or PC. 
When you use a PS·Data system controller, take notice the following:
•The administer authorization and log-in/log-out procedure differs from the unit. They are conformed to the system con-...

23
DETAILED PRODUCT
DESCRIPTION 

24
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■ WJ-SX150 Matrix Switcher
● Front View
qOperation indicator (OPERATE)
Lights up when the power of the unit is turned on.
Note: The indicator will blink to indicate rising tempera-
ture in the matrix switcher.
When the indicator blinks, turn the power off and
refer servicing to qualified service personnel.
wReset button (RESET)
Resets and restarts the unit.
Note:The system configuration is not reset.
eUnit number selector (UNIT)
This selector is reserved...

25
● Rear View
SIGNAL GND
POWER
AC IN
CAMERA1 12
23
3 2
DATA  3 D ATA  2SERIAL ALARM
TERM
OFF ON42 14
3
CAMERA
SW  INRS485(CAMERA)LINE
SELECT
MONITOR OUT
EXT IN
(PLAY IN)
EXT OUT
(REC OUT)
OUTIN
4 45
56
67
78
89
910
1011
1112
1213
1314
1415
1516
16
RS485(CAMERA)
DATA  4 DATA HDR
PS•DATADATA  1
t yuio!0
!1!2!3!4!5!6
!9!7!8
tCamera Output connectors (CAMERA OUT 1–16)
The video signal connected to the CAMERA IN connec-
tor is supplied at these connectors.
When the power of the matrix switcher is turned off,...

26
● Front View
@0Operation indicator (OPERATE)
Lights up when the controllers power is turned on.
@1Link indicator (LINK)
Lights up when communication is established with the
matrix switcher.
@2Alarm indicator (ALARM)
Lights up when an alarm condition exists.
@3Monitor indicator (MONITOR)
Lights up when the monitor number appears on the
LED display.
@4LED Display
Displays the monitor number, camera number, numeric
entry and error status, etc.
@5Camera indicator (CAMERA)
Lights up when the camera number...

27
#0Focus buttons (FOCUS NEAR/FAR)
Adjust the lens focus of cameras equipped with the
specified lens.
Press the NEAR and FAR buttons simultaneously. The
lens focus is adjusted automatically, if the specified
auto focus camera is equipped.
#1Zoom buttons (ZOOM WIDE/TELE)
Press these buttons to zoom the lenses equipped with
the specified cameras.
Press the WIDE and TELE buttons simultaneously dur-
ing the recorder mode. The recording is started.
#2Call Preset button (CALL PRESET/PROGRAM
PRESET)
To call...

28
$4Next button (NEXT)
Moves a tour sequence one step forward from the step
previously paused on the active monitor.
Also selects a camera. If the active monitor is in the
spot mode, press NEXT while holding down the CAM
(SET) button, to replace the currently selected camera
with the next higher-numbered camera.
During the recorder mode, this button moves the play-
back image one step forward.
$5Previous button (PREV)
Moves a tour sequence one step backward from the
step previously paused on the active...

29
SETUP
SHIFT
REW/FF
STEPAUTO FOCUS
OPERATELINK ALARMBUSYPROHIBITED
CALL
PRESET
PROGRAM
PRESET
IRISCLOSE OPEN
NEAR FAR
WIDE TELE
FOCUS
ZOOM AUTO IRIS
GROUP SEQ
PAUSE
SUSPEND
F1
CAM SETUPALL RESET
ACKRESET
F2
TOUR SEQ
PREVNEXT
STOP
OSD
AUTO PAN
MONITOR CAMERA
For Matrix Switcher (WJ-SX150)
WV-CU CJ360System Controller
RECORDER
INDEX
STOP PLAY
REC
PAUSE
CAM FUNC
CLEAR
LOG OUTMON LOCK
DEF ON
WIPER
DEF OFFMON (ESC)
T&D CAM ID
MON STATUSALLEVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ON...

30
^2Joystick
Use this joystick to manually operate cameras, camera
site accessories and  a recorder, or to move the cursor
in SETUP MENU on the active monitor screen.
}:Up
{:Down
[:Left, rewind*, backward field advance*
]:Right, fast-forward*, forward field advance*
*Available after pressing the RECORDER button while
connecting to a recorder.
^3Top button
Pressing this button will automatically set the lens focus
of a specified camera.
^4Iris buttons (IRIS CLOSE/OPEN)
Close or open the lens iris of...

31
SUSPEND:To suspend an activated alarm, press this
button while holding down the SHIFT button. ALM
SUSPENDED will appear on the monitor. To cancel
the suspension, press this button while holding
down the SHIFT button again.
&5Function 1 button (F1/CAM SETUP)
Press this button while holding down the SHIFT button
to open the cameras SETUP MENU on the active moni-
tor.
The function as the F1 button is reserved for future use.
&6Tour Sequence button (TOUR SEQ)
Press this button, in combination with the...