Panasonic Matrix Switcher Wj Sx150 Operating Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.WJ-SX150
Matrix Switcher 
Operating Instructions
Matrix Switcher WJ-SX 150
OPERATE
OPERATE LED WILL BLINK
IF COOLING FAN MALFUNCTIONS 

2
The serial number of this product may be found on the bot-
tom of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No. WJ-SX150
Serial No.
Caution:
Before attempting to connect or operate this product,
please read the label on the bottom.
NOTE: This equipment has been tested and found to com-
ply with the limits for a Class A digital device, pursuant to
Part 15 of...

3
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or...

IIMPORTANT SAFETY INSTRUCTIONS  ......................... 3
CONTENTS ....................................................................... 4
PREFACE .......................................................................... 6
FEATURES ....................................................................... 6
PRECAUTIONS ................................................................. 7
DOCUMENT CONVENTION  ............................................. 7
FEATURES OF THE MATRIX SWITCHER SYSTEM  ...... 9...

5
CAMERA FUNCTION CONTROL ....................................94
■Camera Setup ........................................................94
■Camera Function (Shortcut Function) ....................94
■Changing to Black and White Images  ...................95
■Patrol Learn and Play  ............................................95
■Camera Panning Function  .....................................96
CAMERA SITE ACCESSORIES CONTROL  ...................97
■Receiver Control...

6
PREFACE
Matrix Switcher WJ-SX150 is designed for a surveillance control system, which is composed of 16 cameras,
4 monitors and 4 system controllers.
System controllers are used to operate the surveillance control system.
In combination with Digital Disk Recorder WJ-HD500 Series, *WJ-HD100 Series or a time-lapse VCR, a surveillance system
can be established in a local area.
* To use WJ-HD100 Series or a time-lapse VCR, you need to install Multiplexer Board WJ-SXB151 inside the matrix switcher....

7
PRECAUTIONS
DOCUMENT CONVENTION
•Refer all work related to the installation of this
product to qualified service personnel or system
installers.
•Do not block the ventilation opening or slots on the
cover.
To prevent the appliance from overheating, place it at
least 5 cm (2 inches) away from the wall.
•Do not drop metallic parts through slots.
This could permanently damage the appliance. Turn
the power off immediately and contact qualified service
personnel for service.
•Do not attempt to disassemble...

9
FEATURES OF THE MATRIX
SWITCHER SYSTEM 

MATRIX SWITCHER SYSTEM DESCRIPTIONS
10
Matrix Switcher System WJ-SX150 is a surveillance control system, which is composed of cameras, recorders, and this unit
(the matrix switcher).
This system has various functions for surveillance control.
The following are the descriptions about the functions.
■Crosspoint Switches
All matrix switchers, no matter how complicated and sophisticated they may be, depend on crosspoint switches to perform the
basic operations of the switcher. The crosspoint switches from a...

11
●Sequence Mode
More than one cameras images are sequentially displayed for a
fixed time.
The illustration shows an example of the sequential display of
images through Camera 2, 4, and 6 on Monitor 1.
Before use, the parameters* of the sequence need to be config-
ured and uploaded to the unit.
*Example: Camera selection, monitor selection, and dwell time
(the time to display each image).
■System Control
System controllers are used to control the equipment connected to this system.
●
About System...