Panasonic Kx-tvs90 Voice Processing System Installation Manual

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 101
4.5 COMMON DIGITAL INTEGRATION 
FEATURES AND SETUP PROCEDURES
The following features can be used on any KX-T proprietary telephone (7000 series analog; 
7200/7400 series digital). KX-T7000 series is used with the KX-TA624. The KX-T7200 and 
KX-7400 series are used with the KX-T series PBX that uses DPT Integration.
4.5.1 Live Call Screening (LCS) Programming
LCS notifies subscribers of incoming messages...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
102 Installation Manual
4.5.3 Live Call Screening Password Canceling
To cancel the password, follow the procedure below. (It is not necessary to enter PITS 
Programming to activate this feature).
PC programming is also available for KX-TD500 users (see 4.5.6 Live Call Screening 
Assignment via PC Programming).
1.Lift the handset or Press the SP-PHONE button.
2.Dial the feature number [77 ] (for KX-TA624) or [799] (for KX-T...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 103
4.5.5 Live Call Screening Private/Hands-Free Mode Assignment via 
Station Programming
This program assigns a VPS response for when a message is being left in a mailbox. It 
determines whether an alert tone is sent or whether the recorded message is played through the 
built-in speaker of the extension. The default mode is hands-free. (This is a station level 
program and should be done at each individual...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
104 Installation Manual
4.5.6 Live Call Screening Assignment via PC Programming
The KX-TD500 users can program Live Call Screening features via PC programming. Follow 
the procedure below to assign each feature.
1.Go to 4-2 Extension Line screen.
Screen output:
2.Select the Card No. and Port No. which you are going to program.
3.In LCS Settings:
a)To set LCS Password, Enter a 3-digit number (using 0-9) in LCS Password.
Note
To...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 105
4.5.7 Live Call Screening Button Assignment via Station 
Programming
For the Live Call Screening feature to work at an extension, the extension must have an LCS 
button lit at the time of the message reception. This key must either be a DSS/BLF or CO key 
with a lamp. Follow the procedure below to assign an LCS button on an extension. (This is a 
station level program and should be done at each individual...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
106 Installation Manual
2.Press the Flexible (CO, DSS) button that you wish to assign as a Live Call Screening 
Cancel button.
3.Dial [93].
Screen output: LCS Cancel
4.Press STORE. The STORE indicator light turns on.
The display shows the initial programming mode.
5.For KX-TA624
Set the MEMORY switch to SET.
For KX-T series PBX that uses DPT Integration
Press the PROGRAM button or lift the handset.
6.Repeat these steps for each...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 107
4.5.10 Two-Way Transfer Button Assignment via Station 
Programming
For the Two-Way Transfer feature to work at an extension, the extension must have a TWT 
button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow the procedure 
below to assign a TWT button on an extension. (This is a station level program and should be 
done at each individual telephone.)
PC programming is also...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
108 Installation Manual
4.5.11 Voice Mail Transfer Button Assignment via Station 
Programming
This feature allows an extension user to transfer calls directly to a Voice Mailbox. This is 
available with both Digital and Inband Integrations.
PC programming is also available for KX-TD500 users (see 4.5.12 Button Assignment via 
PC Programming).
1.Enter PITS Programming:
For KX-TA624
With the phone on-hook, Set the MEMORY switch to...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 109
3.Click CO Key in the upper right corner. Flexible CO Key screen (for all CO Keys) 
displays.
Screen output:
4.Click the Key Number to which a button will be assigned.
Flexible CO Key screen displays.
Screen output: 

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
110 Installation Manual
5.Select the desired Key Type. When 2WAY-REC, 2WAY-TRN, or VTR is selected, enter 
the extension number in DN.
Example screen output:
6.Click OK. Flexible CO Key screen (for all CO Keys) displays again.
7.Click OK. 4-2 Extension Line screen displays again.
8.Click OK or Apply.
9.Repeat these steps for each extension.
4.5.13 Live Call Screening Activation
To activate the Live Call Screening status, follow...