Home
>
Panasonic
>
Communications System
>
Panasonic Kx-tvs90 Voice Processing System Installation Manual
Panasonic Kx-tvs90 Voice Processing System Installation Manual
Here you can view all the pages of manual Panasonic Kx-tvs90 Voice Processing System Installation Manual. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 111
INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX Installation Manual 111 4.5.14 Live Call Screening Password Control This feature allows Operator(s) and the Manager of the PBX to cancel the password for LCS at any extension. If a user forgets the preprogrammed password, Operator(s) and the Manager of the PBX can cancel the LCS password. 1.Enter PITS Programming: For KX-TA624 With the phone on-hook, Set the MEMORY switch to PROGRAM. (Display changes to PITS-PGM Mode.) For...
Page 112
INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX 112 Installation Manual
Page 114
CUSTOMIZING THE SYSTEM 114 Installation Manual 5.1 STARTING UP 5.1.1 Before Programming 1.Determine the customer’s needs. Work with the owner, manager, and receptionist to build the Custom Service Greetings and Holiday Greetings. Figure out which ports are to be answered by which greetings. Check the software level of the PBX. 2.Use System Administration and your personal computer for the startup sequence. 3.After the system becomes on line, disconnect the CO lines going into the system until the...
Page 115
CUSTOMIZING THE SYSTEM Installation Manual 115 Depending on your PBX type, some steps will be skipped as shown below. * Not available in the United States. 5.1.3 Starting the Quick Setup The sequence must be followed through to the end to take effect. If you press \, you will have to start over. Quick setup may be performed again without erasing prior data. Note Depending on PBX extension numbering, the mailbox numbers might be 2- to 5-digit long. At the System Administration Top Menu, Type [5] and...
Page 116
CUSTOMIZING THE SYSTEM 116 Installation Manual 1.PBX Type a)Press ENTER. Screen output: b)Select your PBX type. The required steps are different for some models. Go to the step indicated below for that type. Notes APT Integration with the KX-TA624 will be activated automatically by selecting 7. KX-TA series. DPT Integration with the KX-TD816/KX-TD1232/KX-TA1232, KX-TD308, or KX- TD500 will be activated automatically by selecting 5. KX-TD816/KX-TD1232/ KX-TA1232, 6. KX-TD308, or 8. KX-TD500. APT/DPT...
Page 117
CUSTOMIZING THE SYSTEM Installation Manual 117 Type [S] to go to the next screen. 3.Extension Numbers for Mailboxes Screen output: Enter extension numbers of subscribers who need personal mailboxes (the VPS accepts any extension numbers within a 2- to 5-digit range). For example, to enter the extension number 101, Press [101] and Press ENTER. You can also enter multiple extensions. Enter the extensions from No.101 to No.110 by Pressing [101-110] and Pressing ENTER. The VPS will create mailboxes with...
Page 118
CUSTOMIZING THE SYSTEM 118 Installation Manual 4.Creating Mailboxes To go to the next screen (S) or to change the menu (P or N), the cursor must be in the MBX column. Screen output: a)To create or discard mailboxes In the MAKE (Make/Delete) field: Type [M] (Make) to create the mailbox; Type [D] (Delete) to discard the mailbox. If there are more than 62 mailboxes, the first 62 of them are displayed with Make and the rest are displayed with Delete (screen output: [Assigned 62, Vacant 0]). To change the...
Page 119
CUSTOMIZING THE SYSTEM Installation Manual 119 The length of mailbox numbers The Message Manager mailbox (General Delivery Mailbox) might be 2- to 5-digit long (98, 998, 9998, or 99998). The System Manager mailbox might be 2- to 5-digit long (99, 999, 9999, or 99999). If both 3 and 4-digit extension numbers exist at the same time, the VPS will unify all mailbox numbers to 4-digit length by entering [0] at the end of all 3-digit numbers. Example: Note After creating mailboxes for subscribers by Quick...
Page 120
CUSTOMIZING THE SYSTEM 120 Installation Manual 5.Port Service Setting Screen output: Incoming Call Services for all ports (Day/Night) can be defined by this setting. Default values for all ports (Day/Night) are Automated Attendant Service (Custom 1). To select other incoming call services, go to Setting Ports. 6.Password Setting Screen output: You can assign the System Administrator Password and System Reset/Clear Password in this screen, if necessary. IMPORTANT We strongly recommend that you set the...