Panasonic Kx-tvs90 Voice Processing System Installation Manual

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 81
e)Check the information of Card Properties and confirm the LPR version of the card.
Note:
The LPR Version must be 2 or higher for the VPS card (101: DLC/DHLC) to 
which the control channel will be assigned.
Screen output:
f)Check the information of CPU Card Information and confirm the Software 
Version of the KX-TD500. The software version must be Q171A or higher for DPT 
Integration to be utilized....

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
82 Installation Manual
2.Assignment of the ports to be connected to the VPS
a)Go to the 1-3 Extension Port Assignment screen.
b)Select the appropriate VPS card (101: DLC/DHLC) in the Card No. menu.
c)Set the attribute of the valid ports to be connected to the VPS to VPS (DPT).
d)Click Apply to save the changed data.
Note:
The parameters except for Attribute will disappear and the DN (Directory 
Number) will be cleared.
Screen...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 83
3.Assignment of VPS card and its model
a)Go to the 1-4 VPS (DPT) Port Assignment screen.
b)Select the corresponding equipment number in the TVS No. menu.
c)Select TVS80/110/200-1/200-2 in the Type menu.
Note:
Depending on the version of the KX-TD500, the selection might be TVS200-1. 
In this case, select TVS200-1 to connect the KX-TVS90.
d)Select the card (101: DLC/DHLC for jacks 1-8; 201: DLC/DHLC for...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
84 Installation Manual
4.Assignment of the extension ports connected to the VPS
a)Continue the programming in the 1-4 VPS (DPT) Port Assignment screen.
b)Select the extension port number of the card (DLC/DHLC) to which the VPS (DPT) jack 
is to be connected in the Port No. menu.
Note:
This menu is displayed only when the attribute of the ports is assigned to VPS 
(DPT) in step 2.
This program tells the KX-TD500 which extension...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 85
Screen output:
5.To set the trunk (CO line) features, follow the instructions in Settings for the trunk (CO 
line) features (3.3.4 KX-TD500 Programming for Inband Integration in 
3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs).
6.Connect the jack assigned in Step 4 to the VPS.
7.Connect your personal computer to the VPS and start your communication software (i.e., 
HyperTerminal, Procomm Plus,...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
86 Installation Manual
The calls to the VPS can be processed after the Power Indicator stops flashing. 
After turning the power on, the system starts up in the following sequence: 
The Power Indicator light goes on.
The Power Indicator light begins to flash.
Checking Flash Memory Cards is displayed on the screen.
Screen output:
The VPS tests the CPU card, the flash memory, and 
the ports until 1...2...3... is displayed....

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 87
10. Start up completed.
a)The Power Indicator light stops blinking when the start-up has been successful. (The 
delay varies according to the system’s condition.)
b)**ON LINE MODE** is displayed.
c)System prompt [>] is displayed on the screen. To enter system administration, Press 
ENTER. All parameters can be set through the menu-driven program.
11. Go to the System Administration Top Menu. Select [5] and...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
88 Installation Manual
4.4 CONNECTING THE VPS WITH THE 
PANASONIC KX-TD816, KX-TD1232, KX-
TA1232 AND KX-TD308 
Notes
Do not use system programs [106] or [602] for DPT Integration.
The next 2 sections (4.4.1 KX-TD1232 Software Verification and Programming for DPT 
Integration via the Manager’s Extension and 4.4.2 KX-TD1232 Software Verification 
and Programming for DPT Integration via the Operating and Maintenance Tool) are...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 89
If the software version of the PBX is lower than this, you may not be able to utilize some 
of the features available only with DPT Integration. For more information, call National 
Parts Center at 1-800-833-9626.
From the SYS-PGM NO ? screen:
a)Enter [116].
b)Press the NEXT button (SP-PHONE).
c)Enter the system number ([0] or [1], master/slave). The system displays the ROM 
version and the date it was...

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
90 Installation Manual
From the SYS-PGM NO ? screen:
a)Enter [118].
b)Press the NEXT button (SP-PHONE).
Screen output: VM NO?
c)Press the NEXT button (SP-PHONE).
Screen output: VM-01:#_ _ -1: 165
( _ _ = the port number you entered in program 117)
d)Enter the Extension Number that you want this port to have.
(The default extension number for port 1: 165; port 2: 166)
e)Press STORE.
f)Repeat steps c, d, and e until all extension...