Panasonic Kx-tvs90 Voice Processing System Installation Manual

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
Installation Manual 51
b)If the VPS is only answering calls not answered by the operator (Operator Backup): 
Flexible Ringing Assignment—For each outside (CO) line, use System Programs 
[47] (Day Mode) and [48] (Night Mode) to enable ringing at the operator’s extension 
(jack).
Delayed Ringing Assignment—To give the operator time to answer the call before 
the VPS picks up, we recommend setting the delay to 3 or 4 rings for each extension 
connected...

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
52 Installation Manual
3.Put all extensions connected to the VPS into 1 extension group using System Program 
[600].
Reserve this extension group for these extensions! Do not mix other extensions into this 
group.
Note
Up to two VPS units can be connected to the KX-TA624. When two VPS units are 
connected to the KX-TA624, 2 different extension groups should be assigned for each 
VPS in System Program [600]. One extension group is for jack 07, or jacks...

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
Installation Manual 53
Flexible Ringing Assignment—For each outside (CO) line, use System Programs 
[408] (Day Mode), [409] (Night Mode) and [410] (Lunch Mode) to enable ringing 
on every extension (jack) that you want to have ring.
Delayed Ringing Assignment—To give users time to answer the call before the 
VPS picks up, we recommend setting the delay to a few seconds for each extension 
connected to the VPS. Use System Programs [411] (Day Mode),...

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
54 Installation Manual
3.3.4 KX-TD500 Programming for Inband Integration
Whenever possible, we recommend that you use DPT Integration. However, in some cases, 
this is not possible. In the following situations, you need to use Inband Integration:
Your PBX is a third-party telephone system.
You have a KX-TD500, but all the extension cards are analog types.
You have a KX-TD500, but the DHLC/DLC cards are ancient versions (therefore, 
cannot support...

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
Installation Manual 55
2.Assignment of the extension ports to be connected to the VPS
a)Go to the 1-3 Extension Port Assignment screen.
b)Assign Attribute of the port to be connected to TEL (default).
c)Assign DN for the port (click DN Refer to check the available directory numbers).
Note:
This program allows you to assign an extension number to each Voice Mail port. 
To reach the Voice Mail system, users dial these extension numbers.
d)Assign...

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
56 Installation Manual
3.Assignment of the extension line to be connected to the VPS
a)Go to the 4-2 Extension Line screen.
b)Set Data Line Mode to Yes.
c)Click Apply to save the changed data.
Note:
This program prevents the VM port from being interrupted by Call Waiting, 
Hold Recall, and Executive Busy Override features during a call.
Screen output: 

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
Installation Manual 57
4.Settings for the trunk (CO line) features
Select the appropriate trunk (CO line) feature settings depending on how your 
customer plans to use the VPS.
 The VPS answers all incoming outside calls promptly.
Go to [Recommended Settings (1)].
 The VPS answers when the operator does not take the call after a specified number of 
rings.
Go to [Recommended Settings (2)].
 The VPS answers when an extension user does not take the...

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
58 Installation Manual
[Recommended Settings (2)]
If the VPS is only answering incoming outside calls not answered by the Operator (Operator 
backup): 
a)Assignment of DIL 1:1 line
1)Go to the 4-1 Trunk Line screen.
2)Assign Destination Day/Night/Lunch/Break for each trunk (CO line) to a 
specific extension number.
3)Click Apply to save the changed data.
Note:
Specify the FDN for the extension group to which Operator has been assigned.
Screen output: 

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
Installation Manual 59
b)Assignment of IRNA (Intercept Routing No Answer) destination:
1)Go to the 3-1 Trunk Group screen.
2)Assign Intercept Destination Day/Night for the trunk (CO line) group.
3)Click Apply to save the changed data.
Note:
Specify the FDN for the extension group to which VM or AA has been assigned.
Screen output: 

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
60 Installation Manual
c)Assignment of IRNA (Intercept Routing No Answer) timer:
1)Go to the 2-4 System Timer 1/2 screen.
2)Assign Intercept Time parameter.
3)Click Apply to save the changed data.
Note:
This parameter tells the KX-TD500 how long to let a call ring at an extension 
before forwarding (redirecting). 
Screen output: