Home
>
Panasonic
>
Communications System
>
Panasonic Kx-tvs90 Voice Processing System Installation Manual
Panasonic Kx-tvs90 Voice Processing System Installation Manual
Here you can view all the pages of manual Panasonic Kx-tvs90 Voice Processing System Installation Manual. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 11
Table of Contents Installation Manual 11 6.2.2 Recording the Owner’s Name ...................................................................................152 6.3 BACKING UP THE SYSTEM.................................................................................. 153 7 SYSTEM MAINTENANCE AND TROUBLESHOOTING 7.1 INITIALIZING THE SYSTEM ............................................................................... 156 7.2 UTILITY...
Page 12
Table of Contents 12 Installation Manual B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS ........................................................................................................ 231 B4 SYSTEM ADMINISTRATION—PORT/TRUNK SERVICE .............................. 241 B4.1 Port Assignment........................................................................................................ 241 B4.2 Trunk Group Assignment...
Page 13
VOICE PROCESSING SYSTEM OVERVIEW Installation Manual 13 Section 1 VOICE PROCESSING SYSTEM OVERVIEW
Page 14
VOICE PROCESSING SYSTEM OVERVIEW 14 Installation Manual 1.1 WHAT THE VPS CAN AND CANNOT DO 1.1.1 Why Voice Processing? The VPS handles incoming and outgoing calls. When a call comes in, it answers, forwards to appropriate extensions, takes and stores messages, and notifies subscribers when messages are left. Subscribers may send and transfer messages to other subscribers within the system. The VPS is easy to use, helping callers through the system with step-by-step voice prompts. Unlike handwritten...
Page 15
VOICE PROCESSING SYSTEM OVERVIEW Installation Manual 15 1.1.3 VPS Limitations The VPS does not support: UCD functions UCD (Uniform Call Distribution) is a service that distributes calls evenly among extensions; when all extensions are unavailable, it returns to callers to say that all extensions are busy. Calls can be forwarded by the VPS to the KX-TD1232/816/308/500 floating number of a UCD group. The call then rings at the next available phone. The VPS supports UCD functions with very limited...
Page 16
VOICE PROCESSING SYSTEM OVERVIEW 16 Installation Manual 1.2 SYSTEM ADMINISTRATION, MANAGEMENT, AND USE 1.2.1 System Administration System Administration is accomplished by the installer using terminal emulation software. It concerns setting and changing system parameters and diagnosing system problems. 1.2.2 System Management Two system functions are performed by the customer: System Management and Message Management. System Management concerns changing system parameters through the System Managers...
Page 17
VOICE PROCESSING SYSTEM OVERVIEW Installation Manual 17 1.3 SYSTEM BASICS 1.3.1 General The KX-TVS90 is initially configured with 2 ports and 6 h of storage. 1.3.2 System Components Main Cabinet Note EIA port is at SELV. Inside View of the Main Cabinet System Components AC Inlet: Connects the power cable to an AC outlet dedicated to the VPS. Power Indicator: Indicates the system status: when flashing, the system is off-line (not ready to receive calls). POWER VOICE PROCESSING SYSTEM MODE (DIP Switch)...
Page 18
VOICE PROCESSING SYSTEM OVERVIEW 18 Installation Manual MODE (DIP Switch): By setting one of the following positions and executing power down and up, you can achieve a desired result: * 1 For Panasonic KX-T series telephone systems with DPT Integration. * 2 For Panasonic KX-TA624 telephone system with APT Integration.Table 1 Position Additional Function 0 Normal setting. (All switches in 0 position.) 1 Initializes RS-232C parameters. RS-232C default parameters: 9,600, N, 8, 1 2* 1Auto Configuration...
Page 19
VOICE PROCESSING SYSTEM OVERVIEW Installation Manual 19 To change the position, use a pointed object, such as a pen, etc. Ground Terminal: Should be connected to a ground source with less than 1 resistance. RS-232C Connector: Connects an ASCII or VT terminal to the VPS that is necessary to program the system. Memory Card: (One/system) Stores the proprietary system program, and the voice prompts (about 30 min worth); has the capacity to record approximately 6h of messages from callers. 1.3.3 Which...
Page 20
VOICE PROCESSING SYSTEM OVERVIEW 20 Installation Manual Screened transfer from an SLT Message Waiting Notification on proprietary (multi-line) sets (message waiting lamp accessed by dialing on/off codes) If the PBX does not have these features, VPS operation will be limited. See 3.1.4 PBX Requirements for Integration. You will find the following information about each feature listed: Description Limitations of the system without the feature Tests to determine whether the PBX has the feature VOICE...