Panasonic Kx Tde100 Operating Manual

1.3.22  EFA (External Feature Access)
You  can 
access special features (e.g., Call Waiting offered by a host PBX or telephone company. This feature
is only effective for an outside call.
 To hold the current call and then talk to the new party •
In this case, the FLASH/RECALL button on a proprietary telephone must be set to External
Feature Access (EFA) mode through system programming. Customizing Your Phone
•
3.1.4  Customizing the Buttons
Create or edit an External Feature Access (EFA) button.
1.3.23...

To join an intercom call
To join an outside call
•
To join another conversation, you must have Executive Busy Override enabled at your
extension through COS programming.
• It is possible for an originating extension to leave a three-party conversation with an outside
party and let the two other parties talk by simply going on-hook.
• Executive Busy Override is not available when making a call to a SIP Extension.  For the originating extension
72 Operating Manual
Document Version  2008-10  1.3.23...

To talk to each party alternately
 Executive Busy Override Deny
A preprogrammed extension user can prevent his calls from being interrupted by another extension user
(Default: Allow other users to interrupt calls).
To set 1.3.24  Extension Dial Lock
You can lock your extension so that other users cannot make unauthorized outside calls.
This feature is also known as Electronic Station Lockout.
To lock Document Version  2008-10  
Operating Manual 73 1.3.24 Extension Dial LockTalk to the 
other party....

To unlock
•
If you forget the extension PIN or cannot unlock your extension , consult your manager.
The manager can clear your extension PIN, or unlock your extension. Then, you can set the
new PIN and unlock your extension by entering it.
• If your extension is locked by this feature, it cannot perform the following operations:
–Making outside calls
– Changing the call forwarding destination
• If you do not set extension PIN, you cannot lock and unlock your extension.
To make an outside call while your...

Features
Default Setting
Paging Deny Allow
Timed Reminder Cleared
Do Not Disturb (DND) *1
Off
Call Waiting *1
Enable—Tone
Executive Busy Override Allow
BGM Off
Data Line Security Off
Paralleled Telephone The telephone in
parallel rings.
Log-in/Log-out Log-in*1
These features may not be reset, depending on system programming.
To reset •
After performing Extension Feature Clear, the setting of Call Waiting becomes "Enable—
Tone". In this case, dial tone 2 will be heard when you go off-hook.
1.3.26...

To set
To cancel
CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers your
password (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a.Keeping your PIN secret.
b. Selecting a complex, random PIN that cannot be easily guessed.
c. Changing your PIN regularly.
• Valid numbers for an extension PIN are "0" through "9".
• If the 
wrong...

To switch on the relay
•
The relay will be switched off after a specified time period.
1.3.28  External Sensor Preprogrammed  extensions 
can receive an alert call from an external sensor (e.g., security alarm) connected
to the PBX.
To answer a sensor call •
If you do not answer a sensor call within a specified time period, the sensor call will stop.
1.3.29  FWD (Call Forwarding) –  FWD (Call Forwarding)
–  FWD/DND Settings Using Fixed FWD/DND Button
Document Version  2008-10  
Operating Manual 77 1.3.29...

 FWD (Call Forwarding)
You can have your incoming calls forwarded to a specified
destination.
All Calls:
All calls are forwarded. Preset extensions may also forward from
their own receiving group.
Busy:
All calls are forwarded when your extension is busy.
No Answer:
All calls are forwarded when you do not answer the call within a
specified time period.
Busy/No Answer (BSY/NA):
All calls are forwarded when you do not answer within a specified
time period or when your extension is busy.
Follow Me (From):...

To set/cancel
To set Follow Me from another extension
•
It is not possible to set Follow Me from a SIP Extension. However, it is possible to set it on a
SIP Extension from another extension that is not a SIP Extension. •
When using a proprietary telephone, you can set or cancel Call Forwarding by pressing the
FWD/DND button (fixed button) instead of " 710".
Document Version  2008-10  
Operating Manual 79 1.3.29 FWD (Call Forwarding)PT/SLT/PS
Enter #.On-hook.Enter destination extension number. 
Or...

To set the timer for "No Answer" and "Busy/No Answer"
Call Forwarding (FWD) for your Incoming Call Distribution Group
80 Operating Manual
Document Version  2008-10  1.3.29 FWD (Call Forwarding)Off-hook.Enter time 
(seconds [2 digits]).
time
PT/SLT/PS
Enter    713. On-hook.
1 3 7C.Tone PT/SLT/PS
0
1Set
Cancel
OR
Enter 1 to set 
or 0 to cancel.Enter ICD Group 
extension number.
ICD Group
extension no.
Off-hook.5
6
4Both Calls
Intercom CallsOutside CallsOR
OR
Enter    71.
17
Enter 4 to 6 as...