Panasonic Kx Tde100 Operating Manual

If you use a single line telephone which does not have the " " or "#" keys;
it is not possible to access features that have " " or "#" in their feature numbers.
 Tone
You will hear various tones, during or after an operation, for confirmation. Refer to " 4.3.1  Tone" (Appendix). Display
In  this 
manual, you will see "the display …". This refers to the display of a Panasonic proprietary telephone. If
your telephone is not a Panasonic display proprietary...

 Icon Descriptions
The following icons show you the feature availability, notes and action to use the features. This feature cannot be used with a
single line telephone. Seize a CO line (One of the
following).
•
Press the CO button.
• Dial automatic line access
number 9.
• Dial CO line group access
number and CO line group
number. See "Programming" for Related
Programming if necessary.
Off-hook (One of the following).
•
Lift the handset.
• Press the SP-PHONE button.
• Press  the 
MONITOR button....

 When You Use a Panasonic Proprietary Telephone
If you use a Panasonic proprietary telephone and the Console, they may have some of the useful feature
buttons described below. For a PS user, refer to "Operating Instructions" for PS. These buttons make
operations simple. The illustrations may differ from the buttons on your telephone.
Buttons on the PT Flexible Buttons:
Used to make or receive an
outside call (CO button), or as a
feature button. Button
assignment is required.
Refer to...

TRANSFER:
Used 
to 
transfer a call to another
party. HOLD:
Used to place a call on hold.
FLASH/RECALL:
Used to disconnect the current
call and make another call
without hanging up.
This button can also be used as
a 
CANCEL 

button while on-hook. CONF (Conference):
Used to establish a multiple party
conversation.
VOICE CALL/MUTE:
Used to monitor an intercom call
automatically, but it cannot be
used for hands-free
conversations. It also mutes the
handset microphone during a
conversation. Call Forwarding...

Programmable Feature
(PF):
Located on the upper part of the
Flexible button array or on the
DSS Console.
Assigns the desired button and
used to access the stored
feature. Mostly used as a
One-touch Dialing button. (Only
the "F and number" may be
shown on some telephones.) MODE:
Used to shift the display to access
various features.
SELECT:
Used to 
select the displayed item
or to call the displayed phone
number. SHIFT:
Used to access the second level of Soft
button features.
ENTER:
Used to confirm...

Button
Feature
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls Used to forward all calls to a specified destination or refuse.
FWD/DND—Outside calls Used to forward CO line calls to a specified destination or refuse.
FWD/DND—Intercom calls Used to forward intercom calls to a specified destination or refuse.
Group FWD—Both calls Used to forward all the calls to your group to a specified destination.
Group FWD—Outside calls Used to forward the CO line calls to your group to a specified destination....

Button
Feature
Time Service Switching Mode
(Automatic/Manual) Used to switch the time service mode, Automatic or Manual.
Two-way Record Used to record a conversation into your own mailbox.
Two-way Transfer Used to record a conversation into the mailbox of a specific extension.
One-touch Two-way Transfer Used to record a conversation into the mailbox of a specific extension with
one touch.
Live Call Screening (LCS) Used to monitor your own voice mailbox while an incoming caller is leaving
a message and,...

 How to Follow the Steps
An example of system operation is shown below. 28 Operating Manual
Document Version  2008-10  1.1.1 Before Operating the Telephones The DSS button light shows the current status as follows:
Off:The extension is idle.
Red on:Your or another extension is using the line.
Customizing Your Phone
3.1.3 Customizing the Buttons
Create or edit a Direct Station Selection (DSS) button.
PT and SLTPT/SLT/PS/SIP Extn.
Off-hook.Talk.Dial extension number 
or press DSS.
ORextension no.
(DSS)...

 Connection Example
This diagram shows you a connection example. *1
ITSP: Internet Telephony Service Provider
*2 DCE: Data Circuit Terminating Equipment Document Version  2008-10  
Operating Manual 29 1.1.1 Before Operating the Telephones Doorphone & Door Opener
External Music Source
Pager/
SpeakerBatteriesRemote PC
PC
Printer Telephone Company
PBX
Amplifier External Sensor/ 
External Relay Device
KX-T7600 KX-T7600 Voice Processing 
SystemKX-T7636/
KX-T7633
Router
PC
CS PS
Wireless Phone Fax Machine
PC...

1.2  Basic Operations
1.2.1  Making Calls
–  Intercom Call
–  Operator Call
–  Calling an Outside Party
 Intercom Call
You can call another extension user. •
The DSS button light shows the current status as follows:
Off: The extension is idle.
Red on: Your or another extension is using the line.
• * You 
have to press the SDN button once or twice depending on the mode of the SDN button.
For details, refer to "1.3.49  PDN (Primary Directory Number)/SDN (Secondary Directory
Number) Extension". •
To...