Panasonic Kx Tde100 Operating Manual

2.2 To hold the second call and then talk to the original party
After holding it, you can talk to the original party. Then, you can disconnect it and then talk to the new party
again.
Document Version  2008-10  
Operating Manual 51 1.3.12 CALL WAITING FEATURESPT/SLT/PS
During a conversation
Off-hook.On-hook.Talk to the 
original party.Enter     50.
05C.Tone PT/PS
Press HOLD.
During a conversation
Disregard this step if both 
parties are extensions.
HOLD
Talk to the
original party.
Off-hook.On-hook.Talk...

•
Depending on the type of your telephone , you may be able to talk to the other party
using the speaker and the microphone (Off-hook Call Announcement [OHCA]), or you
can receive an announcement through the handset (Whisper OHCA), if you are having
a  conversation 
using the handset. For more details on each feature, refer to "1.3.13  Call
Waiting Tone", "1.3.45  OHCA (Off-hook Call Announcement)", or "1.3.77  Whisper
OHCA".
• The caller’s name or number is displayed for five...

 Answering Call Waiting from the Telephone Company
This is an optional telephone company service. You can receive a call waiting tone with the caller ’s name or
telephone number information. For details, consult your telephone company. •
To return to the original party , repeat the operation.
• In this case, the FLASH/RECALL button on proprietary telephones must be set to
External Feature Access (FEFA) mode through system programming.
• The caller’s telephone number will not be displayed on telephones or...

To set/cancel for outside calls (Automatic Call Waiting)
•
To change the tone from a PT, refer to "3.1.2  Personal Programming". •
For information about answering a waiting call, refer to " 1.3.12  CALL WAITING
FEATURES".
1.3.14  Character Entry You can enter the following characters. The tables show you the characters available for each button. Table
1 or Table 2 can be programmed. 54 Operating Manual
Document Version  2008-10  1.3.14 Character EntryOff-hook.
Enter 0 or 1.On-hook....

Table 1 (Standard mode)
Document Version  2008-10  
Operating Manual 55 1.3.14 Character Entry  

Table 2 (Option mode)
 To enter "Ann"
Note
•To erase the character on the cursor, press CLEAR.
• To move the cursor to the left, press  .
• To move 
the cursor to the right, press  . When entering two or more characters that use the same
button  consecutively 

(e.g. "G" and "I"), you must press this button or the FWD/DND button after entering
the first character.
• If the SELECT button is pressed, the characters for each button will be displayed in reverse order.
• To toggle...

1.3.15  Conference
–Conference
– Leaving Three-party Conference  Conference
You can add one or more parties to your conversation.
To establish a conference call Document Version  2008-10  
Operating Manual 57 1.3.15 Conference Press CONF. Dial desired 
phone number.
Seize CO line before 
dialing outside phone number.
PT/PS
Talk with 
multiple parties.
During a conversation
desired 
phone no.
Talk to the 
new party.CONF
Press CONF
or TRANSFER.
OR
CONF
TRANSFERC.ToneC.Tone Dial desired
phone number....

To establish a conference call when receiving a call from an outside party during a two-party
conversation
58 Operating Manual
Document Version  2008-10  1.3.15 ConferenceDial desired
phone number.
desired 
phone no.
SLT
Talk with multiple parties.
Enter 3. Press Recall/
hookswitch.Talk to the 
new party.
3
During a conversation
Seize CO line before 
dialing outside phone number.
Press Recall/
hookswitch.
C.Tone PT/PS
Press HOLD.
During a conversation
HOLD
Press flashing CO,
PDN, or SDN.Talk to the
new...

To add four or more parties to a conference
To add another party on hold to a conference
To talk to two parties alternately in a three-party conversation
Document Version  2008-10  
Operating Manual 59 1.3.15 ConferencePress CONF. Press CONF. Dial desired 
phone number.
desired 
phone no.
Seize CO line before 
dialing outside phone number.
PT/PS
Talk.
During a conversation
Talk.
To continue
CONFCONF
C.Tone PT/PS
During a 3- to 7-party conference
Press flashing CO, ICD Group,
PDN, or SDN corresponding to...

To disconnect one party and then talk to the other in a three-party conversation
•
* In this case, the FLASH/RECALL button on a proprietary telephone must be set to Flash/
Recall mode through system programming.
• During 
a three-party conversation, pressing the TRANSFER button or Recall/hookswitch
alternates between the two other parties in the conversation.
• You can have a conference with a maximum of eight parties (comprising intercom or CO
lines) simultaneously.
• During a conversation involving...