Panasonic Kx Tde100 Operating Manual

1.3.53  Private Network Features—CLIR (Calling Line Identification
Restriction)
When  making 
a call through a private network, you can select whether the called party can see your telephone
number or not.
To show/prevent •
You can change the mode by pressing a preset CLIR button while on-hook.
The CLIR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed. Customizing Your Phone
•
3.1.4  Customizing the Buttons
Create...

1.3.55  Private Network Features—COLR (Connected Line
Identification Restriction)
When receiving a call through a private network, you can select whether the caller can see your telephone
number or not.
To show/prevent •
You can change the mode by pressing a preset COLR button while on-hook.
The COLR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed. Customizing Your Phone
•
3.1.4  Customizing the Buttons
Create or...

To prevent (not show)
Availability of this feature depends on the following:
•
The ISDN service of the other party’s telephone company
• The telephone service of the other party ’s ITSP (Internet Telephony Service Provider)
• The settings of the other party’s telephone equipment
1.3.57  Private Network Features—TIE Line Access You can access extensions connected to other PBXs in a private network.
To call •
* Which type of telephone number must be entered depends on the settings of your PBX.
To call with...

•
To start monitoring another PBX extension after customizing an NDSS button,  go
off-hook, press the NDSS button, and go on-hook.
The NDSS button light will show the current status as follows:
Off: The extension is idle.
Red on: The extension is busy. Customizing Your Phone
•
3.1.4  Customizing the Buttons
Create or edit a Network Direct Station Selection (NDSS) button.
1.3.58  Quick Dialing You can make a call simply by pressing the preprogrammed number for quick dialing. •
This is a useful feature for...

1.3.60  Room Status Control
In a hotel-type environment, an extension assigned as a hotel operator can check guests into
or out of rooms and confirm that the room is clean and ready for the next guest by changing
the room status of the corresponding extension. The hotel operator ’s extension must have
flexible 
buttons assigned as Check-in, Check-out, and Cleaned-up *1
 buttons, and a DSS button
for each extension that will be used in a guest room. *1
The Cleaned-up feature is only available for the...

To check in a guest
•
After check-in, Remote Extension Dial Lock is deactivated, and the guest can make outside
calls from the room extension. (Refer to "2.1.5  Remote Extension Dial Lock ".)
• When 
the room status of extensions is changed, detailed room status information is recorded
with the PBX automatically. This requires system programming.
 116 Operating Manual
Document Version  2008-10  1.3.60 Room Status ControlPress Check-in. Dial extension number and then press 
ENTER, or press desired...

To check out a guest
•
After check-out, Remote Extension Dial Lock is activated, and outside calls from the room
extension are restricted. (Refer to "2.1.5  Remote Extension Dial Lock ".)
• After check-out, wake-up call and Call Log information for the room extension are cleared
automatically. 
In addition, features set on the room extension are reset to the default settings.
For a list of features that are reset, refer to "1.3.25  Extension Feature Clear".
• When the room status of...

To change the cleaning status of a room (KX-TDE600 only)
•
For  information about other Hospitality features, refer to "1.3.33  HOSPITALITY FEATURES". Customizing Your Phone
•
3.1.4  Customizing the Buttons
Create or edit a Check-in, Check-out, or Cleaned-up button.
1.3.61  Self Labeling (KX-NT366 only) The KX-NT366  IP-PT 
has 12 flexible buttons, and a display
for each button to show what feature, telephone number or
extension number is assigned to it. The display can also be
switched to show 3...

To switch display
•
When you answer an incoming call or when you seize a CO line, the display automatically
changes to the page that contains the green lit button.
• After  customizing 
each button, you can set the displayed text for the button. For details about
customizing buttons, refer to "3.1.4  Customizing the Buttons".
1.3.62  Speed Dialing, Personal You can store up to 100 numbers at your extension for your personal use.
This feature is also known as Station Speed Dialing.
To store a...

•
To call using a directory, refer to "1.4.3  Directories ".
• A KX-HGT100 user can store and dial personal speed dialing numbers in his/her own
telephone. Refer to the Quick Reference Guide of the 
KX-HGT100 for instructions.
1.3.63  Speed Dialing, System You can make calls using speed dialing numbers stored in the PBX. •
To call using a directory, refer to "1.4.3  Directories ".
1.3.64  SVM (Simplified Voice Message) Your PBX can provide you with answering machine service.
Your...