Panasonic Kx Tde100 Operating Manual

To make a call or set features from another extension
To make a call or set features through DISA
1.3.75  Walking Extension
You can exchange the settings set at another extension with your own settings. This allows you to use your
own settings, including your extension number, on another person ’s extension. Settings such as extension
number 
and One-touch Dialing memory are available at the new extension. It is also possible to exchange the
DSS Console settings along with the extension settings. Walking...

To exchange your settings with another extension
•
An extension personal identification number (PIN) is required to use this feature. Refer
to "1.3.26  Extension PIN (Personal Identification Number)
".
• Your previous extension will receive the old settings of your new extension.
• Extension settings can be exchanged between SLT and SLT, PT and PT, or SLT and PT.
• If 
you are using a KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346 telephone with
a Bluetooth wireless headset, and exchange the...

 When using extension settings at a different location
In this example, extension user A sets his/her own extension status to "
Service-out" at the main office. Then,
he/she can set another extension status to "Service-in " at the branch office to have his/her own extension
settings available at the extension.
 When two users share one telephone In this example, extension users A and B work in shifts and use the same extension in turn. User A sets the
extension status to...

To set an extension to Service-out status
To set an extension to Service-in status and have your own settings available
•
An extension personal identification number (PIN) is required to use this feature. Refer
to "1.3.26  Extension PIN (Personal Identification Number)".
• Extension settings can be exchanged between SLT and SLT, PT and PT, or SLT and PT.
1.3.77  Whisper OHCA During a conversation, you can be informed of a waiting call with a voice announcement. You cannot talk to
the caller, but...

•
Whisper  OHCA  is only available with certain digital proprietary telephones and IP proprietary
telephones. In addition, both you and the other party must use supported telephones.
• Whisper OHCA is not available for outside calls; only call waiting tone can be set (refer
to "1.3.13  Call Waiting Tone").
• A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone. ( ®...

1.4  Display Features
1.4.1  Call Log, Incoming
When you receive an outside call or an external sensor call, call information is recorded automatically in the
incoming  call 
log. A preprogrammed number of calls can be logged per extension. When the call log is full and
other call arrives, the oldest call is deleted.
You can modify the logged telephone number using the display proprietary telephone or the portable station.
When the Call Log button light turns on, there is a call which you did not...

The incoming call log information is displayed as follows:
To view the log information with the Call Log button
To view the log information with the Navigator key
Document Version  2008-10  
Operating Manual 147 1.4.1 Call Log, Incoming*: New is displayed for call logs which have not previously been viewed;
    Old is displayed for call logs which have previously been viewed. 
[With Callers Name]
Catherine
 OCT.27  4:30PM   THU
New : Not Answered
1234567
    
             EXIT   CLEAR
---------------...

To clear the log information
To call
•
The Call Log button light shows the current status as follows:
Off: No incoming call, or you have already viewed the call log.
Red on: You have missed calls to view.
• If your call is answered by another extension, the caller ’s information is recorded in the logs
of both your extension and the answering extension.
• You 
can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged...

To call
To call with the REDIAL button
•
* System programming is required for this operation.
• This operation is available only for digital proprietary telephones with a display.
To store the caller’s information in personal speed dialing Document Version  2008-10  
Operating Manual 149 1.4.2 Call Log, OutgoingKX-NT300/KX-DT300/KX-T7600
Press Left.
Press Up or Down 
until desired number
appears.Off-hook.
While on-hook  Display PT
Off-hook.
While on-hook 
REDIALREDIAL
Press REDIAL to
display the...

•
You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information. Refer to " 3.1.2  Personal
Programming".
• If a call arrives while you are using the call log, the call log display will be replaced with the
caller’s information.
• PS user: Refer to "Operating Instructions" for PS. •
To enter characters, refer to "1.3.14  Character Entry". 150 Operating Manual
Document Version  2008-10...