Panasonic Kx Tde100 Operating Manual

To store the names and numbers in personal speed dialing
•
* To enter characters, refer to "1.3.14  Character Entry". Document Version  2008-10  
Operating Manual 171 3.1.2 Personal ProgrammingPress PROGRAM
or PAUSE.Enter 10 and then press ENTER.
Or press STORE.Enter personal speed dialing number 
(location number) (2 digits).
personal speed 
dialing no. (location no.)
Enter phone number 
(max. 32 digits).Enter name 
(max. 20 characters).
name
Press PROGRAM
or PAUSE.
phone no.
OR
PROGRAM
PAUSE...

To edit the names and numbers of personal speed dialing
3.1.3  Programming Feature Clear
You  can 
reset the settings of the following features on your extension to the default settings with one operation.
Features Default Setting
Display Switching Mode Automatic
Hot Line Off
Calling Line Identification Restriction (CLIR) Allow
Calling/Connected Line Identification Presentation (CLIP/COLP) Caller ID assigned on your
extension
Preferred Line Assignment—Outgoing Intercom
Preferred Line Assignment—Incoming...

Features
Default Setting
LCS Mode Set (After Answering) Stop recording
Automatic Call Waiting On
Manual Call Waiting—Intercom Calls On (Tone)
Call Waiting Tone Type Selection Tone 1
Absent Message Off
Personal Absent Message Cleared
Call Forwarding (FWD)/Do Not Disturb (DND)—Intercom  Calls/Outside
Calls Off
FWD N/A Timer 15 seconds
Call Pickup Deny Allow
Headset Operation Headset off
Executive Busy Override Deny Allow
Paging Deny Allow
Key Pad Tone Set On
Background Music (BGM) Off
Data Line Security...

3.1.4  Customizing the Buttons
You can customize the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons. •
To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
• The buttons in the table below can only be set on certain flexible buttons, as follows:
–Flexible buttons on PTs/Add-on Key Modules/PSs: all buttons can be set.
– Flexible  buttons...

Button
Programming Input
Group FWD—Intercom calls    + Incoming call distribution group extension no.
Account  
Conference  
Terminate  
External Feature Access (EFA)  
Call Park    + Parking zone no. (2 digits)
Call Park (Automatic Park Zone)    
Call Log
*4  
Call Log for ICD Group
*4    + Incoming call distribution group extension no.
Log-in/Log-out  
Log-in/Log-out of a specified
group
   + Incoming call distribution group extension no
Log-in/Log-out for all groups    
Hurry-up    + Incoming call...

Button
Programming Input
Primary Directory Number (PDN)  
Secondary Directory Number
(SDN)
   + Extension no. +   + delayed ringing time (0–7)
*7
Check-in *4  
Check-out
*4  
Cleaned-up
*4*8  
Two-way Record
*9    + Voice mail floating extension no.
*10
Two-way Transfer *9    + Voice mail floating extension no.
*10
One-touch Two-way Transfer *9    + Voice mail floating extension no.
*10
 +   + Extension
no./Incoming call distribution group extension no.
Live Call Screening (LCS) *9  
Voice Mail Transfer...

•
You can select the parameter with the Navigator key (Up or Down) instead of entering a
number.
Document Version  2008-10  
Operating Manual 177 3.1.4 Customizing the Buttons Press(CO)
Enter the programming input (          ),
and desired phone number.2
Press          in front of the number you
want to keep secret.
INTERCOM
Press          again after entering the number
you want to keep secret.
INTERCOM
Press               to store.
Press          or           or
PROGRAMPAUSEPROG
OCT.27   03:13PM   THU...

To distinguish the ringing tones for each CO, ICD Group, PDN, SDN, or INTERCOM button
(Digital proprietary telephone only)
•
* Available tone types vary depending on the telephone you are using:
–KX-NT300 series (except KX-NT321 )/KX-NT136/KX-DT300 series (except KX-DT321
)/
KX-T7600 series: Tone types "01" to "30" (01–20: tone, 21–30: melody) are available.
– KX-NT265/KX-NT321/KX-DT321: Only tone types "01" to "08" are available.
It is possible to enter a tone type number...

3.2  Manager Programming
3.2.1  Programming Information
The manager can program the following item.
•Other Extensions Control
Available Extension
The extension assigned as a manager
Required Telephone
A Panasonic Proprietary Telephone with display (over 2 lines)
(e.g., KX-NT343, KX-DT346, KX-T7636)
Manager Password
To enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234) CAUTION
•The PBX has a default password preset. For security, change the password the first time...

Item
Programming Input
Locking/unlocking other extensions.
(Remote Extension Dial Lock)    +   + Extension no. +   (to lock)/
 (to unlock) + 
Clearing the PIN and PIN lock for extensions.    +   + Extension no. + 
Clearing the PIN and PIN lock for verification
codes.
   +   + Verification code + 
Setting the verification code PIN.    +   + Verification code + PIN (max. 10 digits)
+  CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers your
password (verification...