Panasonic Kx-T123210 Installation Manual

Description 
The system Data features are preset as the default 
data of the programming. 
All parameters Extension Name 
System parameters 
Account Code Input Mode 
CO parameters 
Call Transfer to Outside Line 
Extension parameters 
Call Forwarding to Outside Line 
DSS parameters 
Executive Override 
Speed call 
Do not Disturb Override 
System parameters 
Extension Number Assignment 
Operator Assignment 
Paired Telephone Assignment for 
DSS Console 
Automatic CO Hold Using DSS Button 
Day/Night Service...

Programming 
To set System Parameters, Speed Call or All 
Parameters to the default data ; 
1. Dial (99). 
“System Clear” will be displayed. 
2. Press the NEXT button. 
“Menu : All Para” will be displayed and 
“All Para” will blink. 
3. Repeat pressing the SELECT button until the 
desired data mode is displayed. 
4. Press the MEMORY button. 
The LCD will stop blinking. 
5. Repeat steps 3 to 4, to clear the other system 
data. 
To set CO Parameter to the default data ; 
1. Dial (99). 
2. Press the NEXT...

If you connect KX-T30820 at Extension 105 (Jack No. 05) and set the CO button of KX-T30820 as shown in Fig. 
2, Outgoing calls and Incoming calls in Extension 105 (Jack No. 05) are operated as followings. 
CO Button on which “COl” is printed Change 
- CO Button which can access to Trunk group 1 
CO Button on which “CO2” is printed ------- CO Button which can access to Trunk group 2 
CO Button on which “CO3” is printed p CO Button which can access to Trunk group 3 
l See page “To assign into trunk group...

OPERATION FOR EMSS PROPRIETARY TELEPHONE 
( KX-Tl23230, KX-T123220, KX-T123250, KX-T61631, KX-T61630, KX-T61620, 
KX-T61650, KX-T30830, KX-T30820, KX-T30850 
) 
To operate this system, after making program changes, set the System Program Switch located on the KX-T123210 I 
( Electronic Modular Switching System ) to the SET position. 
Making Calls 
When the unit is unused, Liquid Crystal Display will show the month, day and the present time 
Using the Handset Hands-free 
Lift 
handset Dial Talk 
extension...

n Automatic Line Access n Individual Line Access 
Lift handset 
or press 
SP-PHONE Dial “9 ” Wait for C.O. 
dial tone 
Dial 
phone 
number Talk Hang up or 
press 
SP-PHONE 
Description 
Each extension can automatically select an 
idle CO (Central Office) line within the 
KX-T123210. 
Operation 
1. Lift the handset or press the SP-PHONE 
button. 
2. Dial (9). 
Dial tone from CO (Central Office) will be 
heard 
. 
l The CO indicator will be lit green at your 
extension and lit red at other extensions. 
3....

I Lift handset I I Dial “8 I’ 
or press 
SP-PHONE 
H Individual Trunk Group Access 
i%: for dial tone Dial trunk 
group number 
(1 through 8) 
‘1 
1 
, 
Dial 
phone 
number Talk Hang up 
handset or 
press 
SP-PHONE 
l YOU may press the CO button instead of dialing 
8 and trunk group number (1 through 8). In this 
case, you must assign the trunk group access 
number to the CO button. 
To assign, see “Flexible CO button” on page 
4-53. 
Description 
Each extension can automatically select an idle 
CO line...

l Be sure the handset is in the cradle and the SP-PHONE or MONITOR button is OFF. 
l Set the MEMORY switch of the Proprietary telephone to “PROGRAM”. 
I n Storage When the MEMORY button is pressed, a beep will be 
m 
rf z 11;11 The entry is the same as what was 
previously stored. 
The entry is different from the one 
Press Dial “9” Dial Press 
PROGRAMMABLE phone MEMORY that was previously stored. 
FEATURE number Repeat the procedure of 
programming. 
l You may dial 81 through 88 instead of 9 . 
W To...

Programming 
Be sure the handset is in the cradle and the 
SP-PHONE or MONITOR button is OFF. 
1. Set the MEMORY switch to “PROGRAM”. 
“PITS-PGM NO ? +” will be displayed. 
2. Press a programmable feature button. 
The LCD will show “MOl/ P : Not Stored” 
when nothing is stored in the 
programmable feature button “I”. 
When automatic line access number 9 and 
the phone number 123-456-7890 has 
been stored, “MOl/P : g-123-456-” will 
be displayed. 
3. Enter the line access number. 
9 : automatic line...