Panasonic Kx-T123210 Installation Manual

Use of Other Features 
Setting 
All Calls 
0 
1 
Dial “1” Hang up or 
press 
SP-PHONE 
Hang up or 
press 
SP-PHONE I I Press 
or press FWDI DND 
SP-PHONE 
(F3) Dial 
extension 
number 
to whom the 
call is 
forwarded 
Dial 
extension 
number 
to whom the 
call is 
forwarded 
Dial “G” 
Busy or No Answer 
I , Lift handset Press 
or press FWD/DND 
SP-PHONE 
(F3) Dial “2” 
To cancel 
Lift handset Press Hang up or 
press 
SP-PHONE  Dial “0” 
I or press FWDIDND 
SP-PHONE 
(F3) 
Description 
All Calls 
All...

To cancel 
1. 
2. 
3. 
4. 
5. Lift the handset or press the SP-PHONE 
button. 
The indicator light of the FWD/DND button 
will be off. 
Press the FWD/DND (or F3) button. 
Dial (0). 
Dial the (#) button. 
A confirmation tone will be heard. 
“FWD/DND Cancel” will be displayed. 
Hang up or press the SP-PHONE button. 
Conditions 
Do Not Disturb is cancelled when call 
forwarding is established. 
Recall for camp-on and Hold recall are not 
forwarded. 
The tone (busy tone or do not disturb tone 
etc.) the...

Setting 
Lift handset Press 
or press FWD/DND 
SP-PHONE (F3) 
To cancel 
phone 
number 
to whom the 
call is 
forwarded 
n You may dial 81 through 88 instead of 9. 
9 ........... . . . . . . . . . . . . . . . .._ Eachextensioncan 
automatically select 
or press an idle CO line. 
SP-PHONE 81 through 88 -.........- Each extension can 
select a trunk group 
designated. 
Lift handset Press Dial “0” Dial “#” 
Hang up 
or press FWD/DND or press 
SP-PHONE (F3) SP-PHONE 
Description To cancel 
Intercom calls to...

Setting 
Lift handset 
or press 
SP-PHONE Dial “7218” Hang up or 
press 
SP-PHONE 
To cancel 
Lift handset 
or press 
SP-PHONE Dial “720#” Hang up or 
press 
SP-PHONE 
Description 
Allows you to prohibit any other extension user 
from answering calls directed to you. 
Conditions 
While your extension is in the “Dial Call Pickup 
Deny” mode, you can place or receive outside 
or intercom calls. 
Operation 
Setting- 
1. 
Lift the handset or press the SP-PHONE 
button. 
2. Dial (721s). 
Wait for a...

Setting 
Lift handset 
or press 
SP-PHONE 
To cancel 
Press 
FWD/DND 
(F3) Dial “4” Hang up or 
press 
SP-PHONE 
QPER 
1 (0 
0 
Lift handset Press Dial “0” 
or press FWD/DND 
SP-PHONE 
(F3) Dial “a” Hang 
press 
SP-PHONE 
Description To cancel 
Each extension can be individually programmed 
for not receiving intercom call or outside calls. 
The programmable feature (F3 only) button of the 
KX-Tl23250, KX-T616.50 or KX-T30850 can 
also be used for “Do Not Disturb” if programming 
is done beforehand in the...

I Lift handset 
or press 
SP-PHONE 
Dl 
1 
Dial “1” Dial 
extension 
number 
(100 through 
Rino back 
tone is heard and 
wait for answer Do not 
disturb 
tone is heard 
Description 
This feature can dial to the extension that is 
set for the Do Not Disturb. 
This feature is required to be set beforehand in 
the KX-T123210. For programming, 
see page 3-74. 
Operation 
1. Lift the handset or press the SP-PHONE 
button. 
2. Dial the extension number (100 through 199). 
3. Do not disturb tone is heard. 
4....

To Deny Executive Override 
I I Lift handset 
or press 
SP-PHONE 
To Allow Executive Override 
I I Lift handset 
or press 
SP-PHONE Hang up or 
press 
SP-PHONE 
Dial “73318 ” Hang up or 
press 
SP-PHONE 
Description To Allow Executive Override 
Allows you to prohibit another extension user 
from intruding into your conversation with an 
outside or inside party. 
Default is “Allow” mode 1. 
2. 
For programming of the intrusive extension, 
see “Executive Override” on page 3-73. 
3. 
Operation 
To deny...

Q.. 
. 
. 
It 
. . 
1 beep 
B 
Lift handset 
or press 
SP-PHONE Dial 
extension 
number Wait until 
confirmation 
tone is heard 
Dial “++” 
Description Description 
“Voice alerting” (through built-in speaker) that 
is established at the called party’s extension, 
can be switched to “Tone alerting” (ringing). 
This feature is required to be set beforehand at 
the called party’s extension. For programming, 
see page 4-56. Music from an external source (e.g. radio) can be 
listened to on the built-in...

Setting 
Message 1. “Will Return Soon” 
pqiqq 
Lift handset Dial “751#” 
or press 
SP-PHONE 
Hang up or 
press 
SP-PHONE 
Message 2. “Gone Home” I 
I I I I Lift handset Dial “752s” 
or press 
SP-PHONE 
I I Hang up or 
press 
SP-PHONE 
Message 3. “At Ext 1 2 3 ” 
I 
extension number 
I I I I Lift handset Dial “753” 
or press 
SP-PHONE 
Dial - Dial “#” 
extension 
number 
(100 through 199) Hang up or 
press 
SP-PHONE 
Message 4. “Back at lo:23 AM” 
l-l-l- 
Lift handset 
or press 
SP-PHONE Dial “7%. 
Enter...

I Description 
Absent messages (Message 1 through 6) which 
are programmed can be informed to calling party. 
Programming can be done at any telephone 
(either proprietary telephones or standard 
telephones). 
When a caller using the proprietary telephone with 
LCD dials the extension in which the message is 
programmed, it will be displayed on the LCD. 
To cancel the message 
Lift handset 
or press 
SP-PHONE Dial “750#” Hang up or 
press 
SP-PHONE 
5. Hang up or press the SP-PHONE button. 
Message 4....