Panasonic Kx-T123210 Installation Manual

Description 
Lamp indicators corresponding to the status of 
the CO (Central Office), the ICM (Intercom) and 
DSS (Direct Station Selection) buttons. 
Explanation 
0 
ICM indicator light 
on 
I slow flashing on hold 
flashing in 
groups of 2 
quick flashing Status 
idle 
0 in use for intercom 
0 in use for CO line 
to which the CO line 
number is not 
assigned. 
on exclusive hold 
0 receiving an 
incoming intercom 
call 
l Indicator of CO button which has been 
changed into DSS button. 
1 ‘Iht /...

Description Description 
In the event of a power failure each CO will be 
connected to assigned extension. 
CO1 will be assigned to extension of jack number 01. 
CO2 will be assigned to extension of jack number 02. 
CO5 will be assigned to extension of jack number 09. 
CO6 will be assigned to extension of jack number 10. 
CO9 will be assigned to extension of jack number 17. 
CO10 will be assigned to extension of jack number 18. The elapsed time (from dialing to replacing the 
handset) on originating an...

Station Programming 
To Program 
l Be sure the handset is in the cradle and the SP-PHONE button is off. 
l Set the MEMORY switch of the proprietary telephone to “PROGRAM”. 
Example: 
Paging All Extensions (Dial 330). 
Press Dial “330” 
Press 
PROGRAMMABLE 
MEMORY 
FEATURE 
After programming all the system features, return the MEMORY switch to the “SET” position, 
To Access 
Lift handset Press Confirmation 
or press PROGRAMMABLE tone of 1 beep 
SP-PHONE FEATURE will be heard Page 
Description To Access...

Prime Line Preference-Outgoing 
l Be sure the handset is in the cradle and the SP-PHONE button is off. 
o Set the MEMORY switch of the proprietary telephone to 
“PROGRAM”. 
Setting To cancel 
m pml Bi 
Dial “13” Dial Press Dial “1 1” 
Press 
CO number MEMORY 
MEMORY 
(01 through 12) 
l After programming “Prime Line Preference-Outgoing” mode, return the MEMORY switch to the 
“SET” position. 
Dialing through CO line 
Lift handset 
or press 
SP-PHONE 
@Jo* . 
. 
I 
. . . . . . 
B 
Wait for 
Dial 
CO. dial...

Idle Line Preference-Outgoing 
l Be sure the handset is in the cradle and the SP-PHONE button is off. 
l Set the MEMORY switch of the proprietary telephone to “PROGRAM”. 
Setting To cancel 
Dial “12” 
Press Dial “1 1” 
Press 
MEMORY 
MEMORY 
l After programming “Idle Line Preference-Outgoing” mode, return the MEMORY switch to the 
“SET” position. 
Dialing through CO line 
Lift handset 
or press 
SP-PHONE Wait for 
CO. dial tone Dial phone 
number 
Description 
You can access any CO line which is not in...

Prime Line Preference-Incoming 
l Be sure the handset is in the cradle and the SP-PHONE button is off. 
l Set the MEMORY switch of the proprietary telephone to “PROGRAM”. 
Setting To cancel 
Dial “23” Dial Press 
CO number MEMORY 
(01 through 12) Dial “22” 
AUTO 
: 
MEMORY 
Press 
MEMORY 
o After programming “Prime Line Preference-Incoming” mode, return the MEMORY switch to the 
“SET” position. 
To 
answer 
Lift handset 
or press 
SP-PHONE 
Description To answer 
When incoming calls from the Central...

No Line Preference-Incoming 
l Be sure the handset is in the cradle and the SP-PHONE button is off. 
l Set the MEMORY switch of the proprietary telephone to “PROGRAM”. 
Setting To cancel 
piq Bi ~~ 
Dial “21” 
Press Dial “22” 
Press 
MEMORY MEMORY 
l After programming “No Line Preference-Incoming”, return the MEMORY switch to the 
“SET” position. 
To answer 
Lift handset 
or press 
SP-PHONE Press 
CO whose 
indicator is 
quickly flashing 
Description To answer 
If programmed for the No Line Preference-...

To Change into Other CO Number To Assign into Trunk Group Access Number 
0 
Be sure the handset is in the cradle and the 
SP-PHONE button is off. 
0 Set the MEMORY switch of the proprietary 
telephone to “PROGRAM”. o Be sure the handset is in the cradle and the 
SP-PHONE button is off. 
l Set the MEMORY switch of the proprietary 
telephone to “PROGRAM”. 
Press CO 
which you 
want to 
change into 
different 
CO number Dial “0” Dial Press 
CO number MEMORY 
which is 
set newly 
(01 through 12) Press CO...

To Change into DSS Button 
Setting 
l Be sure the handset is in the cradle and the 
SP-PHONE button is off. 
l Set the MEMORY switch of the proprietary 
telephone to 
“PROGRAM”. 
which you extension MEMORY 
want to number 
change into (100 throughl99) 
DSS button 
l After programming all CO buttons, return 
the MEMORY switch to the 
“SET” position. 
I 
Dialing (Inter Office Calling) 
0 kl 
Lift handset 
or press 
SP-PHONE Press CO 
which has 
been changed 
into DSS 
Description 
Allows each CO button to...

To Change into Other Ali CO Numbers To Change into Message Waiting Button 
l Be sure the handset is in the cradle and the 
SP-PHONE button is off. 
l Set the MEMORY switch of the proprietary 
telephone to 
“PROGRAM”. 
Press CO 
which you want 
to change 
into other all 
CO numbers Dial ‘W 
Press 
MEMORY 
l After programming all CO buttons, return l After programming CO 1 button, return 
the MEMORY switch to the 
“SET” position. the MEMORY switch to the “SET” position. 
Description Description 
Allows CO...