Panasonic Kx-T123210 Installation Manual

:.......................until the desired CO number (01 through 12) appears. 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . until the desired time appears 
1.5 set 
2.5 set 
3.5 set . . . . . . . . . . . . . . . . . . . default (all 12 CO’s) 
4.5 set 
~~[INEXT@E~IZT~IMEM~RYI(ENDI 
4 
I 
: to assign the same on all 12 CO’s 
Description 
The KX-T123210 may require a pause time to 
access Central Office Line or computer accessed 
line. 
The pause time may be changed to...

r....‘....‘............- until the desired CO number (01 through 12) appears 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . until the desired flash timing appears 
300ms 
600ms . . . . . default (all 12 CO’s) 
900ms 
1200ms 
i 
I. . . . . . . . . . . . *B= q : 
:::..$I* 
Description 
The timing of the hookswitch flash signal must 
be within the requirements from your Central 
Office. There are four choices available 0.3, 0.6, 
0.9, or 1.2second. 
Programming 
1. Dial...

:-.....................-until the desired CO number (01 through 12) appears 
until the desired mode appears 
~............................:15.....,,,,,; 
: to assign the same on all 12 CO’s 
Description 
To detect that an outside party has hung up and 
then terminated the outside line (after a 
conversation, conference etc.) a CPC signal is 
needed. CPC signal detection can be removed or 
added at customer’s request. 6. l 
0 
0 
Programming 
To advance to the next CO number, 
press the NEXT button. 
To...

.‘.....................- until the desired CO number (01 through 12) appears 
until the desired disconnect time appears 
: 
to assign the same on all 12 CO’s 
Description 
A certain amount of time is needed for an 
outside call to be released, this is necessary so 
that a new call may be attempted after 
disconnecting with the previous call. 
There are two choices available, 1.5 and 4.0 6. 
l 
0 
0 
seconds. 
The time you select must be longer than the 
requirements from your Central Office or host 
PBX....

Extension Feature 
. . . . . . . . . . . 
until the desired jack number (01 through 32) appears. 
. . .._.................. 
A= 111 :extension group l_ ....... default (all 32 jacks) 
G :extension group 8 
f . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
: to assign the same on all 32 jack numbers 
Description 
Enables grouping of extension numbers by rress tne M tMuHY button. 
The LCD will stop blinking. 
department or floor by all extension numbers 
into a-maximum of 8 separate...

Service Class Selections 
\I- 
all calls 
atoll calls 
l local calls (charged) 
l local calls 
l selected area codes 
l local calls (charged) 
l local calls 
5. 
l selected exchange 
codes (charged) 
l local calls Denied 
l international calls 
l international calls 
l any calls other than 
specific area code 
programmed 
l international calls 
atoll calls 
l international calls 
atoll calls 
l any calls other than 
specific exchange codes 
(charged) programmed 
l international calls 
atoll calls 
l...

_................ 
until the desired jack number (01 through 32) appears. 
_....................... 
C= 111 : service class 1 ....... default (all 32 jacks) 
$J : service class 8 
: to assign the same on all 32 jack numbers 
Description 
Used to prohibit selected extensions from 
making long distance calls during the night 
time. 
Toll restriction can help eliminate telephone 
abuse and contribute to controlling 
telephone costs. 
There are eight service classes available for 
each extension. 
“Area Type...

 I Service Class Selections 
I 
 
- 
1. 
- 
2. 
Allowed Denied 
- 
3. 
all calls 
atoll calls 
l local calls (charged) 
l local calls 
l selected area codes 
l local calls (charged) 
l local calls 
:E,:I:“‘““‘“’ 
5. l selected exchange 
codes (charged) 
l local calls 
6. 
l local calls 
7. 
many calls other than 
specific exchange 
codes programmed ointernational calls 
I 
l international calls 
l any calls other than 
specific area code 
programmed 
l international calls 
atoll calls 
l international...

i’“‘“““““‘““‘“- until the desired jack number (01 through 32) appears 
i ........................ Dial (Othrough 9, *or#) 
I.. .................................. until the desired letter appears 
Description 
Each extension can be programmed by name and 
will be displayed on the display phone when 
making or receiving intercom calls. 
Programming 
1. 
2. 
3. 
4. 
5. 
6. Dial (63). 
“Extension Name” will be displayed. 
Press the NEXT button. 
“Jack NO ? 4” will be displayed. 
Press the NEXT button or dial...