Panasonic Kx-T123210 Installation Manual

,...................................... 
until the desired CO number (01 through 12) appears 
_ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . until the desired jack number appears 
m : on jack number 01 
& : on jack number 32 
I# : to assign the same on all 32 jacks 
until the desired mode appears 
..e.......default (all 32 jack numbers) 
or 
f-$E--$ other $ number 
CD=l : to assign the same on all 32 jack numbers 
I: on jack number 01 
III 32 :...

Example: 
e 
Company XYZ would like incoming calls from the Central Office during the day mode to be received at 
the following zone. 
Zone Jack no. of Extension Programming CO no. 
A 01,02 01 
B 03,04 02 
C 0506 03 
Jack no. 05,06’N./’ 
Programming 
1. 
2. 
3. 
4. 
5. 
6. 
7. 
8. 
All CO numbers have been set to 
( m or -IO11 m liiiG4..... . . . . . .  ) CO number 01 has been set to 
“Enable” on jack number 01. 
( m or jFF?i ) l5TF5lINIEMORYl...~ 
(lNEXTlorlG@5lLl)@l~lSELECTl 
( m or I#041 ) lsELECTl...

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
until the desired CO number (01 though 12) appears 
(................................................... until the desired jack number appears 
PI : on jack number 01 
m : on jack number 32 
m : to assign the same on all 32 jacks 
until the desired mode appears 
Enable . . . . . . . . ..default (all 32 jack numbers) 
Disable 
or 
on all 32 jack numbers 
_..........,............................... . ....

w Selecting the “Normal” mode 
i ........................................ 
until the desired CO number (01 through 12) appears. 
: 
..................................... 
AB= q : to assign the same on all 12 CO’s 
lolo : on CO 01 
liJT1 :onCO 12 
w Selecting the “DIL” mode 
: ........................................ 
until the desired CO number (01 through 12) appears. 
:. ..................................... until the DIL mode appears 
Normal ............ ..defaul t (all 12 CO’s) 
DIL 
. . . . . . . ....

Programming 
w 
Selecting the “Normal” mode 
1. Dial (51). 
2. 
3. “CO Day/Mode” will be displayed. 
Press the NEXT button. 
“CO NO ?+” will be displayed. 
Press the NEXT button or dial the CO 
number (01 through 12). 
“CO 01 : Normal” will be displayed and 
“Normal” will blink. 
4. 
5. Press the SELECT button until 
the “Normal” mode is displayed. 
Press the MEMORY button. 
The LCD will stop blinking. 
6. To advance to the next CO number, 
press the NEXT button. 
To return to the previous CO number,...

Example: 
0 
Company XYZ would like incoming calls from Central Office During the day mode 
to be received by operators 1 and 2. 
Operator 1 has been connected to jack number 01. 
Operator 2 has been connected to jack number 02. 
I”“‘“’ 
KX-T123210 
Line 
Extension jack number 01 only has been set ’ 
1. a=[( lNEXTl or lo )lsELECTl1O11lG%GFFl.... 
to receive all incoming calls through CO 01. 
2. ( -1 or m 1021 ) lsELECTl 1011 II\IIEMORY.. . . . -. Extension jack number 01 only has been set 
to receive all...

Programming 
n Selecting the “Normal” mode n Selecting the “DIL” mode 
1. 
Dial (52). 
2. 
3. “CO Night/ Mode” will be displayed. 
Press the NEXT button. 
“CO NO ?+” will be displayed. 
Press the NEXT button or dial the CO 
number (01 through 12). 
“CO 01 : Normal” will be displayed and 
“Normal” will blink. 
4. 
5. Press the SELECT button until the “Normal” 
mode is displayed. 
Press the MEMORY button. 
The LCD will stop blinking. 
6. To advance to the next CO number, 
press the NEXT button. 
To return...