Panasonic Kx-T123210 Installation Manual

Line ringing assignment 
Intercom call 
Do not disturb 
Call forwarding 
Call waiting 
Call waiting tone 
’  Data line security 
Dial call pickup deny 
Absent message 
Pickup dial 
DSS parameters 
Console type 
Pair extension 
DSS connection 
DSS button assignment 
Feature button assignment 
Speed call 
Speed access codes (00 through 99) in 
which phone numbers are stored may be 
printed. 
All parameters 
System parameters 
CO parameters 
Extension parameters 
DSS parameters 
Speed call 
Operation 
To...

(2811NEXT(lSELECTll 
until the desired time appears 
Instantly 
5s after dial . . . default 
1 OS after dial 
15s after dial 
Description 
The duration time of the conversation is 
displayed on the LCD and is printed on the 
printer. 
Example: 
10 seconds after dialing 
= ~28IKzqi-GKiqfi[ 
Program the starting time of the timer. 
l Instantly after the CO line is captured. 
l 5 seconds after the dialing. 
l 10 seconds after the dialing. 
l 15 seconds after the dialing. 
Programming Table 
See page 7-9....

;.,............until the desired external paging equipment number (1 or 2) appears 
I I 
_........................... 
until the desired mode appears 
Enable . . . . . ..defauIt (external paging 1 and 2) 
Disable 
Description 
The acknowledge tone that is heard after 
accessing the external paging equipment can be 
removed or added at the customer’s request. 
Refer to “Paging-External” on page 4-24. 
6. 
7. 
- Repeat steps 3 to 5, to program the access tone 
of the other external paging equipment. 
To...

Outside Line Feature 
. . . . . . . . . . . . . . . . . . 
until the desired CO number (01 through 12) appears. 
........................................... 
until the desired mode appears 
.......... .default (all 
. . . . . . . . . . . . . . . . . . . ABE 
pyJ : to assign the same on all 12 CO’s 
q Jzl : on CO 01 
~i~~~ :onCO12 
Description 
You can program which outside line is 
connected and which one is not connected. 
When an extension automatically selects an 
idle-outside line, the extension can...

....................... until the desired CO number (01 through 12) appears 
l ..................................... 
until the desired dial mode appears 
DTMF Mode.............. default (all 12 CO’s) 
Pulse Mode 
: to assign the same on all 12 CO’s 
Description 
Allows the user to select the dialing mode (tone 
or 
pulse) of each CO (Central Office) line. 
0 DTMF Dial Mode 
0 The dial signal from the extension (with tone 
or pulse dial mode) will be converted to TONE. 
TONE will be transmitted to the...

:......;...........-until the desired CO number (01 through 12) appears 
up to 8 outside access codes each with a 
maximum of 2,digits 
Nothing is stored ............ default (all 12 CO’s) 
: to assign the same on all 12 CO’s 
Description 
If the system, (KX-T123210) is installed behind a 
host PBX, the host PBX may require a pause time 
to access Central Office Lines. This feature 
enables the host PBX to automatically pause via 
programming the outward dialing access codes 
of the. host PBX. 6. l 
0 
0...

:..:....................unti I the desired CO number (01 through 12) appears 
................................... 
C= dial the trunk group number (1 through 8) 
q : trunk group number 1 
q : trunk group number 8 
lefault 
CO 01 is assigned to Trunk group 1. 
CO 07 is assigned to Trunk group 7 
CO 08, 09, 10, 11 and 12 is assigned to 
Trunk group 8. 
-{ 
AB= q : to assign the same on all 12 CO’s 
1  . 
Description 2. 
When outside lines are grouped, an idle line 
within the trunk group is automatically...

_..................................... 
until the desired CO number (01 through 12) appears 
,................................................... 
until the desired jack number appears 
I# : on jack number 01 
G : on jack number 32 
a : to assign the same on all 32 jacks 
until the desired mode appears 
..~...~~..default (all 32 jack numbers) 
or 
IEmber/ other CO number 
I 
II 
1 pcNiEiqhh~m&m 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
CD=H : to...

,.................................... 
.-until the desired CO number (01 through 12) appears 
I until the desired jack number appears 
m : on jack number 01 
m : on jack number 32 
m : to assign the same on all 32 jacks 
until the desired mode appears 
other CO number 
or 
;............................................................... CD=l : to assign the same on all 32 jack numbers 
I: on jack number 01 
III 32 : on jack number 32 
AB=a : to assign the same on all 12 CO’s 
I: on CO 01 
I 12 :onCO12...